Netgear GS516v3 Manual
Netgear
Ikke kategoriseret
GS516v3
Læs nedenfor 📖 manual på dansk for Netgear GS516v3 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 5.0 stjerner i gennemsnit af 2.5 brugere
Side 1/2
16-port Gigabit Ethernet Unmanaged Switch
Model GS516v3
• NETGEAR 16-port Gigabit Ethernet Unmanaged Switch Model GS516v3
• Power cord (varies by region)
• Wall-mount installation kit
• Rack-mount brackets and screws
• Rubber feet
• Installation Guide
Package contents
2. Connect the switch
February 2023
3. Connect to power
This switch is designed for indoor use only. If you want to connect it to a device located
outdoors, the outdoor device must be properly grounded and surge protected, and you
must install an Ethernet surge protector inline between the switch and the outdoor device.
Failure to do so can damage the switch.
WARNING: Before connecting this switch to outdoor cables or devices, see
https://kb.netgear.com/000057103 for safety and warranty information.
1. Register the switch
1. From a computer or mobile device that is connected to the Internet, visit
my.netgear.com.
2. Log in to your NETGEAR account.
NOTE: If you don’t have a free NETGEAR account, you can create one.
The Your Registered Products page displays.
3. Click the REGISTER NEW PRODUCT button.
4. In the SERIAL NUMBER eld,typetheserialnumberofyourswitch.
The serial number is 13 digits long. It is printed on the switch label.
5. From the PURCHASE DATE menus, select the date that you purchased the switch.
6. Click the button.REGISTER
Your switch is registered to your NETGEAR account.
AconrmationemailissenttoyourNETGEARaccountemailaddress.
Sample connections
Desktop
IP camera
Smart TV
Laptop Server
Printer
WAX214v2 AP
Desktop
GS516v3 switch
Router
Internet
4. Check the LEDs
When you connect the power adapter to the switch and plug the cable into an electrical
outlet, the LEDs indicate the status:
LED Description
Power LED
Solid green: The switch is powered on and operating normally.
Off: Power is not supplied to the switch.
Numbered Port LED
(Link and Activity)
Solid green: Link on this port.
Blinking green: Activity on this port.
Off: No link is detected on this port.
Square Port LED
(Speed)
Solid green: 1 Gbps link on this port.
Solid yellow: 100 Mbps or 10 Mbps link on this port.
Installation Guide
© NETGEAR, Inc., NETGEAR and the
NETGEAR Logo are trademarks of
NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference
purposes only.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 6, Penrose Two,
Penrose Dock, Cork,
T23 YY09, Ireland
Attach the switch to a wall
To attach the switch to a wall, you need the wall-mount screws that are supplied with the
switch. These screws are 6.3 mm in diameter, 27 mm in length.
To attach the switch to a wall:
1. Locate the four mount holes on the bottom panel of the switch.
2. Mark and drill four holes in the wall where you want to mount the switch.
The four holes must be at a precise distance of 3.94 in. (100 mm) from each other so
that they form a square where each side is 3.94 in. (100 mm).
3. Insert the supplied anchors into the wall and tighten the supplied screws with a No. 2
Phillips screwdriver.
Leave about 0.15 in. (4 mm) of each screw protruding from the wall so that you can
insert the screws into the holes on the bottom panel.
4. Position the switch so that the mount holes are directly over the screws, and slide the
switch down until the top of each mount hole sits directly on the screw, locking the
switch securely.
Install the switch in a rack
To install the switch in a rack, you need the rack-mount brackets and screws that are
supplied with the switch.
To install the switch in a rack:
1. Attach the supplied mounting brackets to the side of the switch.
Insert the screws provided in the product package through each bracket and into the
bracket mounting holes in the switch.
2. Tighten the screws with a No. 2 Phillips screwdriver to secure each bracket.
3. Align the mounting holes in the brackets with the holes in the rack, and insert two pan-
head screws with nylon washers through each bracket and into the rack.
4. Tighten the screws with a No. 2 Phillips screwdriver to secure mounting brackets to the
rack.
Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
Do not use this device outdoors.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz
devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation
ofthisdeviceispermittedinlargeaircraftwhileyingabove10,000feet.Operationof
transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications
with unmanned aircraft systems.
Technical specications
Specication Description
Network interfaces RJ-45 connectors that support 1000BASE-T,
100BASE-TX, and 10BASE-T
Ports 16
Network cable We recommend that you use Category 5e (Cat 5e)
cables or higher rated cables for Gigabit Ethernet
connections.
AC power input 100~240V, 50/60Hz, 0.7A
Maximum power consumption 8.13W
Hardware security Kensington slot
Dimensions (W x D x H) 12.91 x 6.65 x 1.69 in. (328 mm x 169 mm x 43 mm)
Weight 2.99 lb (1.36 kg)
Operating temperature 32 to 122° F (0 to 50° C)
Operating humidity 10 to 90% relative humidity, noncondensing
Storage temperature –4 to 158° F (–20 to 70° C)
Storage humidity 5 to 95% relative humidity, noncondensing
Maximum operating and
storage altitude
10,000 ft. (3,000 m)
Electromagneticcertications
and compliance
FCC, CE, RCM, VCCI, BSMI, KC, ISED, UKCA
Safetycertications CSA, CE LVD, BSMI, RCM, UKCA
NOTE: The switch is designed to be mounted horizontally. Do not mount it
vertically. The ports must be either at the bottom or the top of the switch.
Produkt Specifikationer
| Mærke: | Netgear |
| Kategori: | Ikke kategoriseret |
| Model: | GS516v3 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Netgear GS516v3 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Netgear Manualer
1 Juni 2025
5 Januar 2025
25 December 2024
24 December 2024
13 Oktober 2024
4 Oktober 2024
30 September 2024
26 September 2024
24 September 2024
24 September 2024
Ikke kategoriseret Manualer
- Ikke kategoriseret Fortinet
- Ikke kategoriseret Rooboost
- Ikke kategoriseret Skan Holz
- Ikke kategoriseret Valore
- Ikke kategoriseret Endress
- Ikke kategoriseret SPL
- Ikke kategoriseret TrueLife
- Ikke kategoriseret Coca-Cola
- Ikke kategoriseret CaterCool
- Ikke kategoriseret KDK
- Ikke kategoriseret Raveland
- Ikke kategoriseret BERTSCHAT
- Ikke kategoriseret Chauvet
- Ikke kategoriseret Fortia
- Ikke kategoriseret YA-MAN
Nyeste Ikke kategoriseret Manualer
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025