Netgear VPN05L Manual


Læs gratis den danske manual til Netgear VPN05L (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Netgear VPN05L, eller vil du spørge andre brugere om produktet?

Side 1/3
NETGEAR ProSafe VPN Client Quick Installation Guide
NETGEAR ProSafe VPN Client
version 10.1.1 (Build 10)
Quick Installation Guide
This CD contains the NETGEAR ProSafe VPN client product.
System Requirements
IBM-compatible computer with Pentium processor or equivalent (not Alpha platforms)
Compatible operating systems with minimum RAM:
Operating system Minimum RAM
Microsoft® Windows® 95 16 MB
Windows 98 and Windows NT® Workstation 4.0 32 MB
Windows Me and 2000 Professional 64 MB
Windows XP Home and Professional 64 MB; 128 MB recommended
10 MB hard disk space
Native Microsoft TCP/IP communications protocol
For dial-up connections:
Non-encrypting modem
Native Microsoft PPP dialer
For network connections, Ethernet card and connection
Microsoft Internet Explorer 4.0 or later
le:///C|/cdimagetools/vpnClient/html/QuickInstall.htm (1 of 3)11/19/2003 11:59:43 PM
NETGEAR ProSafe VPN Client Quick Installation Guide
Installing
Before installing the NETGEAR ProSafe VPN Client software, read this document for technical issues
concerning this release.
1. If you're installing this product on Windows NT or Windows 2000 or XP, log on as
administrator or its equivalent.
2. Run the le on the installation CD-ROM at d:\Software\Setup\setup.exe, where d:\ setup.exe
is the drive letter of your CD-ROM drive.
3. Work through the installation wizard. Unless otherwise instructed, accept the defaults.
Note: The SafeNet VPN Adapter, which supports L2TP, is installed only when these network
components are already installed on your computer:
Operating system Component
Windows 95 Dial-Up Networking with the Microsoft Dial-Up
Networking 1.3 Upgrade
Windows 98 and Me Dial-Up Networking
Windows NT Remote Access Server (RAS)
Because Windows 2000 and XP use the native Windows L2TP adapter, the SafeNet L2TP adapter
isn't installed on computers running these operating systems.
4. When the installation completes, click .Finish
5. To complete the client installation, make sure that your computer restarts.
Upgrading
To upgrade to this version of the NETGEAR ProSafe VPN Client , take these steps:
1. Uninstall the current version on your computer through the Control Panel Add/Remove
Programs : application
a. In the uninstall wizard, on the dialog box, click . This removes all Maintenance Remove
the client product's components, but your security policy.not
b. The dialog box prompts you to delete your IPSec security Uninstall Security Policy
policy, which includes any certicates and private keys:
To keep it, click . You can import this security policy after you install the new No
le:///C|/cdimagetools/vpnClient/html/QuickInstall.htm (2 of 3)11/19/2003 11:59:43 PM


Produkt Specifikationer

Mærke: Netgear
Kategori: Ikke kategoriseret
Model: VPN05L
Type: Sikkerhedsstyring
Platform: PC
Kompatible operativsystemer: Microsoft Windows XP Home Edition, Microsoft Windows XP Professional, Microsoft Windows 98 Second Edition, Microsoft Windows 2000, Microsoft Windows Millennium Edition, Microsoft Windows NT 4.0, Microsoft Windows 98
Overholdelse af branchestandarder: Triple DES, DES, MD5, SHA-1, AES-128, AES-192, AES-256
Antal licenser: 1 licens(er)

Har du brug for hjælp?

Hvis du har brug for hjælp til Netgear VPN05L stil et spørgsmål nedenfor, og andre brugere vil svare dig