Nova VisionNOVA Manual

Nova Babyalarm VisionNOVA

Læs gratis den danske manual til Nova VisionNOVA (5 sider) i kategorien Babyalarm. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Nova VisionNOVA, eller vil du spørge andre brugere om produktet?

Side 1/5
MICLOW POWER
CH SW
4 3 2 1
POWER
OFF ONIR
7,5–300mA
AV-OUT
SV-1000mA
(CHARGE)
OFFON
AVIN
4
3
2
1
CH SEL
ON
A1 A2 A3
A4
A5
B1
B2
B3
B4
B11 B12 B13 B14
B5
B8 B9 B10
B6B7
A6
A7
A8
A9 A10 A11
Technical specifications
Camera Monitor
Camera
Frequency: 2.4 GHz
Channel: 4 selectable channels
Modulation: FM
Antenna: Built-in omni-directional antenna
Image sensor: 1/3” CMOS color image sensor
Output power (max.): 10 mW (CE)
Power consumption (max.): 1.8 Watts
Power supply (optional): 230VAC to 7.5VDC, 300mA
or 3 x AA Battery
Operational range: Up to 100 meters
(open air situation)
Dimension: 75mm x 45mm x105mm
Weight: 135g
Monitor
Frequency: 2.4 GHz
Channel: 4 selectable channels
Receiver sensitivity: -80dBm
Antenna: Built-in omni-directional antenna
Power consumption (max.): 5 Watts
Power supply: 100~240VAC to 5VDC, 1A
or 3,6V 1400mAh LI-ION recharge-
able battery
Dimension: 140mm x 115mm x 45mm
Weight: 245g
VisionNOVA omslag 04-07-06 15:11 Side 1
We thank you for choosing VisionNOVA Video Babycall, and we know
you'll be pleased with your choice. Please read this manual carefully
and keep it for future reference.
The box includes
• One camera
• One monitor with an LI-ION battery installed
• One AV (audio/video) cable
Two power adapters (7.5V DC for the camera and 5V DC for
the monitor)
This user manual
Power supply
The camera can be used with a power
adapter or three batteries (type AA alkaline).
On battery power the camera will normally
work up to 11 hours.
Using the power adapter
Plug the power adapter labelled OUTPUT:
7.5V DC into a wall outlet and plug the adap-
ter plug into the underside of the camera (A9).
Put the ON/OFF switch (A11) in ON position.
Using batteries
Open the cover of the battery compartment
(A8) on the rear of the camera.
Insert three AA batteries so their plus (+) and
minus (-) ends are facing as shown on the
inside of the battery compartment cover and
close the battery compartment securely.
Move the ON/OFF switch (A11) to the ON
position.
Discard used batteries in an environmentally
friendly and responsible way.
Never mix old and new batteries.
Remove the batteries from the camera if you
are not planning to use it for a period of time.
Channel selection
Always select the same channel (A10) for the
camera and the monitor.
Congratulations! Camera: Connections
Camera: Legend
Monitor: Legend
MM MM
A1 Lens
A2 Lens knob
A3 Lens body: rotates up to 120
degrees vertically
A4 6 IR LEDs: provide infrared
light for night vision
A5 Microphone
A6 LED indicator for low battery
power
A7 Mounting holes for fixing to
wall etc., centre to centre
distance 33 mm
A8 Battery compartment
A9 7.5V power adapter plug
A10 Switch for channel selection
A11 ON/OFF switch and night
vision switch
B1 Flip-down 2.5” TFT-LCD dis-
play
B2 Speaker
B3 Alarm ON/OFF button
B4 LED indicator for alarm
B5 LED indicator for charging
B6 LED indicator for fully
charged battery
B7 LED indicator for low battery
power
B8 Jack for audio/video output
B9 Volume controller
B10 Brightness controller
B11 Channel selector
B12 Reserve
B13 Power ON/OFF switch
B14 5V power adapter plug
CH SW
4 3 2 1
POWER
OFFONIR
7,5–300mA
POWER
OFF ON IR
MM
M
1


Produkt Specifikationer

Mærke: Nova
Kategori: Babyalarm
Model: VisionNOVA

Har du brug for hjælp?

Hvis du har brug for hjælp til Nova VisionNOVA stil et spørgsmål nedenfor, og andre brugere vil svare dig