Numark ICJ01 Manual

Numark Blander ICJ01

Læs gratis den danske manual til Numark ICJ01 (14 sider) i kategorien Blander. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Numark ICJ01, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/14

Desktop DJ (iCJ01)

Computer DJ Station

Quick Start Owner’s Manual

• Manual de inicio rápido del usuario (ESPAÑOL)

• Guide d’utilisation simplifié (FRANÇAIS)

• Schnellbedienungsanleitung (DEUTSCH)

• Manuale Rapido di Utilizzazione (ITALIANO)

MIXER QUICK SETUP GUIDE (ENGLISH)

1. Make sure all items listed on the front of this guide are included in

the box.

2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE

PRODUCT

3. Study this setup diagram.

4. Place mixer in an appropriate position for operation.

5. Make sure all devices are turned off and all faders are at “zero”

6. Connect all stereo input sources as indicated in the diagram.

7. Connect the stereo outputs to the power amplifier(s), tape decks,

and/or audio sources.

8. Plug your mixer and other devices into AC power.

9. Switch everything on in the following order.

• audio input sources (i.e. turntables or CD players)

• your mixer

• last, any amplifiers

10. When turning off, always reverse this operation by,

• turning off amplifiers

• your mixer

• last, any input devices

11. Go to http://www.ion-audio.com for product registration.

REAR PANEL FEATURES

FRONT PANEL FEATURES

1. Replaceable Crossfader: This

slide fader blends audio between

channels 1 and 2. Note: This

fader is user replaceable if it

should ever wear out. Simply

remove the face plate and then

remove the screws holding it in

position. Replace the fader with

an authorized replacement from

ION Audio Customer Service.

2. Power LED: Illuminates when

the mixer is on.

3. Gain: This adjusts the channel’s

input level. Turn it up as far as

possible without distorting.

4. Cue Select: Use this switch to

determine what you hear through

the headphones. When set to

the left, you will hear Channel 1.

When set to the right you will

hear Channel 2. At the center,

you will hear the Master output, which includes the microphone

and crossfader.

5. Input Selector: This toggles what input source is routed to the

channel from the rear panel inputs. The left selects the Phono

(turntable) or Line (CD Player) and the right selects the USB Audio

Input. While using the iCJ01 with your computer, the switch should

be right, selecting the USB audio inputs.

6. Mic Level: This knob adjusts the volume of the microphone input.

7. Master: This adjusts the main output volume.

8. Cue Gain: This adjusts the volume level to your headphones.

9. Headphone Jack: Plug in your headphones here. The volume

should always be set at its lowest setting while connecting and

disconnecting headphones to prevent damage to headphones

and/or your hearing.

10. Microphone Input: Microphones with a ¼” connector can be

connected to this jack.

11. USB Input 1/Master Level Output: This USB jack sends the audio from

your computer to Channel 1. This is also the simultaneous master output

for recording. This output level is adjusted by the master gain control.

12. USB Input 2/Record Level Output: This USB jack sends the audio from

your computer to Channel 2. This is also the simultaneous fixed recording

output for recording. This output level is fixed.

NOTE: Your mixer can simultaneously record through the USB Output while

it is playing audio sources. For more information refer to the “Using your

USB Mixer with a Computer” manual included.

13. Power Switch: Use this switch to turn on the mixer after all input devices

are already connected to prevent damage to your equipment. Turn the

mixer on before you turn on amplifiers and turn off amplifiers before you

turn off the mixer.

14. AC In: This mixer is designed to work with the power supply assembly

that comes with the unit. While the power is switched off, plug the power

supply into the mixer first, then plug it into the outlet.

15. Master Output (RCA): This output is for connecting an external amplifier

such as a PA system, powered monitors or a home stereo. The level of this

output is controlled by the master knob.

16. Line Inputs: CD players, tape players, portable MP3 players or other line-

level devices should be connected to these inputs.

17. Phono Inputs: This input is used for connecting your turntables. Only

turntables with phono level output should be attached (most turntables

have phono outputs).

18. PHONO/LINE Switch: This switch is used to select between the Line

inputs and Phono inputs on each channel.

19. GND: This screw connector should be used to secure the ground lead from

a turntable.

Note: It is recommended that the mixer be turned off before

connecting and disconnecting any sources to the inputs of the mixer.

Please see the separate manual for using the USB features of your

mixer.

Produkt Specifikationer

Mærke:	Numark
Kategori:	Blander
Model:	ICJ01
Antal USB 2.0-porte:	2
Antal kanaler:	2 kanaler
Linie indgående (RCA):	4
Digital lydbehandling:	- Bit
Phono-indgange (RCA):	4
Master (L, R) udgang:	2