Nxg NX-VCH8 Manual

Nxg Hi-Fi system NX-VCH8

Læs gratis den danske manual til Nxg NX-VCH8 (2 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Nxg NX-VCH8, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Congratulations on choosing the NX-VCH8 Volume Control Distribution Hub. Like all NXG products, great care has been taken in its design.

We hope the combination of advanced engineering and state-of-the-art materials will provide you with a lifetime of listening pleasure.

Introduction

The NX-VCH8 is a stereo (two channel), one input, eight output, broad frequency response, volume control distribution hub. The NX-VCH8

provides a simple solution in complex speaker installations providing an easy way to connect from two to eight volume controls and pairs of

stereo speakers to a single stereo receiver/amplifier. All outputs are labeled easing both connection and troubleshooting of a system.

WARNING: THE NX-VCH8 DOES NOT PROVIDE INTERNAL IMPEDANCE CORRECTION. YOU MUST USE IMPEDANCE MATCHING

TYPE VOLUME CONTROLS TO PROVIDE AMPLIFIER PROTECTION SUCH AS THE NXG NX-VM80 OR NX-VMS100.

Features and Benefits

• Designed for use with

Class 2 wiring

• Parallel connecting block

for use with Impedance

matching volume controls

• One Stereo Input, eight

stereo outputs

• Detachable connectors for

easy wiring

• Compact size fits standard

structured wiring panels

• Heavy-duty PC mounted

screw-type connectors,

capable of accepting up to

14 AWG wire, provide solid

hookup to input and output

wires.

• Isolated left/right circuit

grounds provide safe

connection for amplifiers

with floating grounds

or bridged configuration.

• High quality, heavy-duty

construction throughout

provides excellent reliability.

• Intelligent design allows

simple installation, easy

connection, and trouble

free operation.

Mounting and

Wiring Instructions

1. The NX-VCH8 is designed to

be mounted in a structured

wiring panel or surface mounted

in a central location where all

your wires are routed (typically in a basement, utility room, or attic). Secure the NX-VCH8 to a wall or panel using the two mounting

holes on each end of the unit. Fig. 1 shows a typical layout for 8 stereo speakers with impedance matching volume controls for a typical

home system.

NX-VCH8 Volume Control Distribution Hub

OWNER’S MANUAL

Receiver/Amplifier

Impedance

Matching Type

Volume Controls

Typical Speakers

NX-VCH8

Fig. 1

(Continued on reverse)

NX-VCH8 Specifications

Power Handling:

150 watts RMS per channel

(suitable for use with 300 watt

per channel rated

receivers/amplifiers)

Frequency Response:

20 Hz - 22kHz (+0dB, -0dB)

Wire size acceptance:

2 or 4 conductor, stranded,

16 AWG to 14 AWG

Dimensions:

67/8˝ (175mm) W x

33/32˝ (76mm) H x

13/16˝ (30mm) D

including connectors

Mounting Hole Diameter:

7/32˝ (5.5mm)

Maximum Number of Volume

Control/Speaker Connections:

8 pairs

Designed for use with Class 2

wiring only

16648 North 94th Street

Scottsdale, AZ 85260

1-800-733-0008

www.nxgtech.com

NXG One-Year Limited Warranty

If the NXG product proves to be defective in workman-

ship or materials within one year from the date of the

original customer’s purchase, we will, at our option,

repair or replace the defective product.

Limitation of Implied Warranties

Any implied warranties, including warranties of mer-

chantability and fitness for a particular purpose, are

limited in duration to the length of this warranty.

Exclusion of Certain Damages

NXG’s liability for any defective product is limited to

repair or replacement of the product at our option.

NXG shall not be liable for incidental or consequential

damages of any kind or character because of product

defects. Some states do not allow limitations on how

long an implied warranty lasts and/or do not allow the

exclusion or limitation of incidental or consequential

damages, so the above limitations and exclusions may

not apply.

This Warranty Does Not Cover:

• Damage caused by abuse, accident, misuse, negli-

gence, or improper operation.

• Any product whose serial number has been altered,

defaced, or removed.

• Products that have been altered or modified.

• Normal wear and maintenance.

• Damages caused by shipping. (All claims for shipping

damage must be made with the carrier.)

Warranty Service

Warranty service must be performed by an authorized

service center, usually a NXG dealer or its authorized

agent. You may obtain a list of authorized service cen-

ters by contacting NXG. All warranty repairs must be

accompanied by the original bill of sales. No other doc-

ument is acceptable or is required. This warranty gives

you specific legal rights, and you may also have other

rights which vary from state to state.

NXG reserves the right to revise specifications without notice.

Fig. 3

2. Make sure to use properly

rated, polarity identified

speaker wire from the

receiver/amplifier to the

NX-VCH8, then run wires to

the volume control/speaker

locations. Be sure to leave

enough extra wire to make

connection to the terminal

blocks.

3. Strip about 1/4˝ of insulation

from the end of each wire.

Connect the exposed

bare wire to the removable

connector plugs using a small

screwdriver as shown in Fig. 2.

4. Pay close attention to the

identification markings on the

connectors when inserting

each wire to maintain proper

polarity throughout the system

from your amplifier to the

NX-VCH8 hub, and out to your

volume controls and speakers.

Be sure to twist the loose

strands of each wire together

into a tight bundle when

inserting it into the small

opening of the connector to

prevent loose strands from

touching each other.

5. Install the connector plugs

back on the NX-VCH8 as

shown in Fig. 3.

Fig. 2

Produkt Specifikationer

Mærke:	Nxg
Kategori:	Hi-Fi system
Model:	NX-VCH8

Har du brug for hjælp?

Hvis du har brug for hjælp til Nxg NX-VCH8 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hi-Fi system Nxg Manualer

Nxg NX-VCH8 Manual

22 Juli 2024

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer

AMX Modula AVS-MD-3216-007 Manual

14 September 2025

Starkey Z Series IIC Manual

14 September 2025

Starkey VFusion Manual

14 September 2025

Starkey S Series ITE Manual

14 September 2025

Starkey Destiny 1600 BTE Manual

14 September 2025

Starkey X Series mini BTE Manual

14 September 2025

Starkey S series BTE Manual

14 September 2025

AMX Octaire AVS-OCT-6432-007 Manual

14 September 2025

Starkey S Series iQ BTE Manual

14 September 2025

Starkey ZON RIC Manual

14 September 2025