Sanitizer User Manual
o
Sterilizing
Zone
Storage Zone
USB
Charging
Port
Indicator
Light
Red light
flashing:
Low power.
White light
flashing:
In charging.
Green
light on:
Fully
charged.
Sterilizing
Status
Blue light on:
In sterilizing
progress.
Pull the string to
start work.
String Switch
Device Cleaning
Do not wash the machine with runnin water in case of
causing circuit failure. It’ s recommended to use a wet
cloth to clean it.
Mounting Wall Sticker
Locate an appropriate height on the wall, remember to
leave enough space to hang toothbrushes.
Make sure the sticking area is dry and clean (Suitable
for smooth surface like ceramics, glass, etc.). Keep an
eye out for the correct up/down directions. Stick the
sticker onto the wall, apply a bit pressure to make sure
it’ s stably attached.
Power On/Off
After mounting the device on the sticker, pull the
string once to start sterilizing, the device will
automatically stopped after fifinished sterilizing.
Auto-sterilizing runs every other 6 hours. When the
device is removed from the wall sticker, the device will
be power o- automatically.
String Switch
By pulling the string switch during sterilizing process,
it will automatically stop working; By pulling the switch
during non-working status, it will trigger the sterilizing
process; Auto-sterilizing runs every other 6 hours after
the fifirst sterilizing process is finished.
Smart Sterilizing Timer
In standby mode, auto-sterilizing runs every other 6
hours, then continues to stand by.
More Information
This device is mainly designed for Oclean and other
major brands of electric toothbrush. It is not
guaranteed to be compatible with all toothbrushes on
the market.
Tear off the sticker Stick to the wall Install the sterilizer
123