Onkyo D-407C Manual

Onkyo Højttaler D-407C

Læs gratis den danske manual til Onkyo D-407C (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 78 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 39.5 anmeldelser. Har du et spørgsmål om Onkyo D-407C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

En tC

Before using this unit En-2

使用本系統之前 Ct-2

Precaution on use En-2

使用注意事項 Ct-2

Connection En-2

連接 Ct-2

Placement En-3

安放 Ct-3

Attaching and detaching

the speaker grilles En-3

揚聲器前格板的安裝和拆除 Ct-3

Use with a TV set En-3

作為電視機的外接揚聲器

使用時 Ct-3

Speaker care En-3

揚聲器的維護保養 Ct-3

Specifications En-4

規格 Ct-4

Instruction Manual

Thank you for your purchase of the Onkyo speaker

system.

Please read this manual thoroughly before using it.

Following the instructions in this manual will enable you

to obtain optimum performance and listening enjoyment

from your new speaker system.

Please retain this manual for future reference.

使用手冊

謝謝閣下購買 Onkyo 的揚聲器系統。

在連接各部件及接通電源之前，請先徹底閱讀本手冊。

遵從本手冊內的各項指示，使您的揚聲器系統能夠獲得

最優秀的性能和欣賞效果，您將能獲得最大樂趣。

請保存此手冊以備將來參考之用。

D-407C

Speaker System

En-2

Connection

• Turn the sound volume to the minimum and disconnect the

power cord from the amplifier before connecting the

speaker cables.

• The nominal impedance of this speaker system is 6 . UseΩ

only amplifiers capable of handling this impedance.

• Use the supplied speaker cables to connect between

speaker’s input terminals and the amplifier’s speaker

terminals as illustrated below.

• Connect the speaker cables securely to the terminals, with

the core wires twisted properly. In this case, make sure that

the core wires do not touch each other. Note that a short

circuit in core wires may result in damage to the amplifier.

Before using this unit

• The speaker cabinet is made of wood and is therefore

sensitive to extreme temperatures and humidity. Avoid

placing the speaker systems in locations subjected to

direct sunlight, or in smoky or in humid places, such as

near an air conditioner, humidifier, bathroom, or kitchen.

Doing so may result in damage to the speaker.

• Place the unit on a rigid, level surface. Placing it on a

slanted surface or weak base not only may cause the unit

to fall, but also results in decreased sound quality.

• Be sure to turn off your amplifier before connecting the

speaker system. Connecting them with the amplifier’s

power on may result in damage to the amplifier or the

speaker system.

• Keep water or other liquids away from the unit. If water is

spilled into the unit, not only the unit but also the speakers

themselves may be damaged.

Precaution on use

• This speaker system can handle the specified input power

when it is used for ordinary music reproduction. If the

following abnormal signals are fed to the speaker,

however, an overcurrent may flow in the internal circuits,

causing burning or breakage of the wires even if the input

power is below the specified rating.

1. Noise produced when FM station is not tuned in

2. Sound produced when fast-forwarding cassette tape

deck

3. High-frequency sound generated by an oscillator, an

electronic musical instruments, etc.

4. Oscillating amplifier signals

5. Special test signals produced by audio checking CD,

etc.

6. Sound produced when connecting or disconnecting

audio connection cables (Always turn off the amplifier’s

power before connecting or disconnecting cables.)

7. Howling when a microphone is used

• Do not place magnetic objects such as screwdrivers and

iron parts near the tweeter since they use speakers with

strong magnets. Otherwise, the objects may be attracted,

causing injury or damaging the diaphragm.

Before turning on the amplifier’s power switch:

• Make sure that the positive (+) and negative (–) speaker

cables do not contact each other. Otherwise, a short-circuit

may occur, causing damage to the amplifier.

• Be sure to connect the speaker cables with correct polarity

(connect the speaker’s positive (+) and negative (–)

binding posts with the amplifier’s corresponding speaker

terminals). Reversed polarity results in impaired bass-

range reproduction, causing mislocalization of the sound

image. Also, be sure to connect the Right and Left

speakers with the amplifier’s corresponding speaker

terminals.

• Pull lightly on the speaker cables to ensure that they are

connected firmly.

Connecting to AV amplifier

15mm

1. Strip off the end

of plastic skin,

and give a twist

to the core wire.

2. Slacken the screw

and thread the

core wire deep

enough into the

hole.

3. Hold the core

wire tight by

fastening the

screw in the

direction of an

arrow.

Red cord side

Center speaker terminals of the amplifier

Produkt Specifikationer

Mærke:	Onkyo
Kategori:	Højttaler
Model:	D-407C

Har du brug for hjælp?

Hvis du har brug for hjælp til Onkyo D-407C stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Onkyo Manualer

Onkyo D-407M Manual

15 September 2024

Onkyo SKS-3600 Manual

5 August 2024

Onkyo Smart Speaker G3 VC-GX30 Manual

29 Juli 2024

Onkyo D-105F Manual

28 Juli 2024

Onkyo SBX-300 Manual

27 Juli 2024

Onkyo D-407C Manual

25 Juli 2024

Onkyo SKF-L500 Manual

25 Juli 2024

Onkyo SKH-410 Manual

24 Juli 2024

Onkyo SKS-L500 Manual

24 Juli 2024

Onkyo SKS-HT978 Manual

23 Juli 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Muse M-968 BTY Manual

1 August 2025

Grundig Portable 360 Manual

1 August 2025

Grundig Band 360 Manual

1 August 2025

Grundig GBT Connect 360 Manual

1 August 2025

Muse M-968 BTR Manual

31 Juli 2025

JLab Epic Party Manual

31 Juli 2025

JVC XS-E423 Manual

30 Juli 2025

SoundTube RF31-EZ-T Manual

30 Juli 2025

Valcom VIP-480AL-W-SA Manual

30 Juli 2025

Rockustics StoneHenge II-S/T Manual

30 Juli 2025