Onkyo D-TK10 Manual

Onkyo Højttaler D-TK10

Læs gratis den danske manual til Onkyo D-TK10 (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 58 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 29.5 anmeldelser. Har du et spørgsmål om Onkyo D-TK10, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

2-WAY, BASS EFLEX PEAKERSR S

D-TK10

Cabinet Construction Based on Takamine Voicing Acoustic Technology

The project team chose mahogany—a wood that is widely used to construct

high-quality guitars—as the base material for this speaker. The mahogany is used

as part of a three-layer laminate: two outer mahogany layers with an inner

plywood layer. The cabinet was built by closely following methods used in the

making of Takamine guitars. Of particular note is the bracing inside the cabinet

that contributes to tonality. As Takamine stressed, it is particularly important to

use the material’s strength effectively throughout. What followed was a detailed

fine-tuning process of the cabinet that continued until all parties were satisfied.

To include the baffle with one rounded piece, it was necessary to consider how

standing waves and diffraction within the cabinet would affect the speaker’s

sound. Then, to support the woofer/tweeter units and the network circuit, the

team reinforced the interior with MDF to remove any unnecessary vibrations.

To construct a speaker like a guitar, where

one flat piece of material is manipulated

to achieve its symmetry is an extremely

difficult process. Recognizing Takamine’s

contribution, the construction process

has been named “Takamine Voicing

Acoustic Technology.”

New A-OMF Monocoque Diaphragm to Support Woofer Unit

As the latest development in Onkyo Micro Fiber

(OMF)for woofer diaphragms,

A-OMF Monocoque forms one continuous cover from the center cap over the

whole diaphragm’s surface. Like Advanced Onkyo Microfiber

(A-OMF), A-OMF

Monocoque comprises three layers: an outer polyethylene naphthalate

(PEN)

layer, an inner aramid layer, and a flexible cotton weave layer between the

two. The PEN has a twill (textile weave)that enables the fiber’s weight to be

reduced by 30%. By forming one continuous layer over the surface off the

diaphragm woofer, A-OMF Monocoque helps prevent breakup (occurring when

the cone flexes instead of moves as a perfect piston

). Essentially, the fiber is an

integral part of the woofer unit, and it serves as a perfect complement to the

woofer unit’s piston motion range.

Inspired Guitar Craftsmanship and Proven Technology Breaks New Boundaries

The musicality and acoustic personality of a superbly crafted guitar represents more than a physical musical instrument. It should also be

thought of as a work of art. This understanding has been a central theme of a joint development project between Onkyo and renowned guitar

maker, Takamine, to make a speaker that expresses the positive qualities of both speaker performance and musical instrument design and

construction. Onkyo first approached Takamine with the objective of working together to reproduce the natural sound of an accomplished

musical instrument. With a combined knowledge of vibrating enclosures, the project team set out to create a cabinet based on Takamine’s

“Acoustic Voicing Technology” construction with Onkyo’s speaker expertise. What has been realized is a speaker design that draws on two

unique sound philosophies to create a truly revolutionary loudspeaker.

Highly Responsive Ring-Drive Tweeter to Take Frequency Response

out to 100 kHz

The D-TK10’s ring-drive tweeter enables an accurate response at high

frequencies. The tweeter is designed to take the control of breakup to its limits,

and its piston motion enables it to reach the higher end of the frequency range

(with no sign of breakup

). With the tweeter’s aluminum equalizer, it is possible

to get a flat frequency response out to 100 kHz. The whole tweeter unit works

to prevent any necessary vibration and to completely remove any noise.

Aero Acoustic Drive to Cut Off High Frequency Interference

Poorly designed bass reflex speakers will be affected by membrane overshoot

and poor transient response behavior. With any vented design, the size and

placement of the duct is crucial in ensuring that the woofer’s rear

-firing and

front-firing waves are both in phase. Through its own research of different duct

shapes, Onkyo has developed a long, narrow duct—called the Aero Acoustic

Drive—that has been proven to be more effective than a circular duct in

separating low and high frequency sounds. The bottom duct is separated from

the cabinet to further reduce cabinet vibrations. The end result is a more

natural, precise sound output.

High Quality Network Circuit with Quality Parts

The D-TK10’s network circuit has a ground potential that is free of any

fluctuations, making it possible to generate high-quality audio playback. The

circuit also helps to prevent the masking of faint sounds. The parts that make

up the D-TK10—including a high-quality, German-made WIMA film capacitor;

a leakage-free cable; and gold-plated banana plug-compatible speaker

posts—have been included based on the know-how that Onkyo has gained

from years of speaker development.

Produkt Specifikationer

Mærke:	Onkyo
Kategori:	Højttaler
Model:	D-TK10
Bredde:	133 mm
Dybde:	220 mm
Højde:	276 mm
Vægt:	2900 g
Produktfarve:	Træ
Udgangseffekt (RMS):	200 W
Equalizer:	Ingen
Husmateriale:	Træ
Frekvensområde:	50 - 100000 Hz
Impedens:	4 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Højttaler, type:	2-vejs
Lyd-output kanaler:	2.0 kanaler
Højttaler, placering:	Bordplade/bogreol
Antal drivere:	2
Driver diameter:	100 mm
Diskanthøjttaler:	Ja
Sensitivitet:	80 dB
Diskant diameter:	4 "
Bashøjttaler:	Ja
Forstærker:	Ingen
Højttaler kabinet:	Refleks
Subwoofer driver diameter (britisk):	4 "
Højttalerplacering:	Satellit
Egnet til udendørs brug:	Ingen