Optimal Opti12 Manual


Læs gratis den danske manual til Optimal Opti12 (1 sider) i kategorien Vandvarmer & kedel. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Optimal Opti12, eller vil du spørge andre brugere om produktet?

Side 1/1
1.
Position mounting
template on the wall
at the desired loca-
tion. Make sure the
unit is level and mark
the drill holes.
2.
template. If mounting
on drywall, use a 1/2”
bit to drill pilot holes
where the markings
were made.
3.
1/4”
Use (4) drywall an-
chors and (4) mount-
ing screws. Insert
the anchors into the
drilled holes, then
thread screws into an-
chors. Do not thread
screws all the way
down. Leave them out
about ¼.
4.
Remove front cover of
heater. Align screws
with the mounting
holes on the back of
heater and gently
place it onto the wall.
Make sure the unit is
secure before letting
go.
Congratulations! You have successfully mounted your Optimal water heater. For instructions on plumbing and electrical
installation, please refer to the installation manual provided with your unit, or visit: for a digital version. itsoptimal.com
mounting instructions


Produkt Specifikationer

Mærke: Optimal
Kategori: Vandvarmer & kedel
Model: Opti12

Har du brug for hjælp?

Hvis du har brug for hjælp til Optimal Opti12 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Vandvarmer & kedel Optimal Manualer

Optimal

Optimal Opti12 Manual

15 November 2025
Optimal

Optimal Opti18 Manual

14 November 2025
Optimal

Optimal Opti27 Manual

7 Oktober 2025

Vandvarmer & kedel Manualer

Nyeste Vandvarmer & kedel Manualer