Oregon Scientific WMR918 Manual

Oregon Scientific Vejrstation WMR918

Læs gratis den danske manual til Oregon Scientific WMR918 (9 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Oregon Scientific WMR918, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

CABLE FREE WEATHER

STATION

MODEL: WMR918

USER’S MANUAL

SECTION 1 INTRODUCTION

Congratulations on your purchasing the WMR918 Cable Free

Weather Station. An all-purpose easy-to-use system, the WMR918

lets you monitor the following weather elements:

-Air temperature

-Relative humidity

-Barometric pressure

-Wind speed and direction

-Rainfall

The WMR918 is also equipped with:

-RF calendar clock with daily alarm

-Weather forecast within 32 to 48 km (20- to 30-mile) radius

-Weather alarms

-Memory for maximum and minimum readings

-Simple, touch-screen operation

-RS232 PC connection jack

- backlight

STANDARD PACKAGE

The original WMR918 comes complete with the following:

-Main unit (WMR918)

-Anemometer (WGR918)

-Thermo-hygrometer (THGR918)

-Rain gauge (PCR918)

-Baro-thermo-hygrometer (BTHR918)

-12V AC adapter

The anemometer, thermo-hygrometer and rain gauge are powered

by separate solar transmitters (STR918).

The WMR918 can support up to seven different remote instruments.

You can also connect up to three optional thermo or thermo-hygro

sensors to the system.

Optional items include:

-Thermo-hygro sensor (THGR228/THGR238)

-Thermo sensor (THR228/THR238)

Contact an authorized dealer for optional items.

SECTION 2 INSTALLATION

The WMR918 operates at 433MHz. No wire installation is required

among units.

The WMR918 has an effective range of 100 meters in an open area.

Position the units within the range and be sure the transmission

path is clear of interference and obstacles.

Note:The anemometer, thermo-hygrometer and rain gauge should

be installed outdoors and in locations that best measure the weather

elements the instruments are designed for. As for the baro-thermo-

hygrometer, it must be installed indoors. If you have any optional

thermo or thermo-hygro sensors, they can be installed outdoors or

indoors.

THE ANEMOMETER

The anemometer measures wind speed and direction.

To install it,

1. Place the wind cup over the thinnest shaft on the anemometer’s

T-bar.

2. Tighten the screw on the base of the wind cup.

Produkt Specifikationer

Mærke:	Oregon Scientific
Kategori:	Vejrstation
Model:	WMR918

Har du brug for hjælp?

Hvis du har brug for hjælp til Oregon Scientific WMR918 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vejrstation Oregon Scientific Manualer

Oregon Scientific BAR310HG Manual

12 Januar 2025

Oregon Scientific BAR 898 Manual

11 Januar 2025

Oregon Scientific WMR180 Manual

31 December 2025

Oregon Scientific RMR203HG Manual

31 December 2025

Oregon Scientific THC138 Manual

31 December 2025

Oregon Scientific WMR 300 Manual

31 December 2025

Oregon Scientific RAA 501 H Manual

31 December 2025

Oregon Scientific Alizé BAR268HGA Manual

14 December 2024

Oregon Scientific BAR206X Manual

2 September 2024

Oregon Scientific BAR 888A Manual

1 September 2024

Vejrstation Manualer

Nyeste Vejrstation Manualer

TFA WLAN Gateway D-01 Manual

26 November 2025

Johnson SVM130 Manual

17 November 2025

Johnson SVD080 Manual

14 November 2025

Johnson SVD065 Manual

13 November 2025

Johnson STM185 Manual

13 November 2025

Johnson SVM078 Manual

12 November 2025

Johnson SVD075 Manual

12 November 2025

Johnson SVD205 Manual

11 November 2025

TFA 35.1170.01 Manual

8 November 2025

Alecto WS5100 Manual

3 November 2025