OSD Audio XSP2-1 Manual

OSD Audio Hi-Fi system XSP2-1

Læs gratis den danske manual til OSD Audio XSP2-1 (1 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om OSD Audio XSP2-1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

XSP2.1 3 Channel Amp

SPECIFICATIONS

• Amplier Type: Class D 2.1 Amplier

• Channels: 2 Stereo Full range, 1 Channel Mono

• Power Handling Subwoofer:

200 Watts RMS/400 Watts Peak Mono @ 4Ω

100 Watts RMS/200 Watts Peak Mono @ 8Ω

• Power Handling Satellites:

2x100 Watts RMS/2X200 Watts Peak Stereo @4Ω

2X50 Watts RMS/2X100 Watts Peak Stereo @8Ω

• Frequency Response: 20Hz - 200Hz (Subwoofer)

• Impedance: 4 & 8 Ohm Stable

• Input Terminals: RCA Signal (Low) Level Analog Inputs

• Input Sensitivity: 250mv

• Crossover: 40Hz to 150Hz (Subwoofer) Mono

• Phase Control: 0-180 degrees (Subwoofer) Mono

• Signal to Noise Ratio: 90 dB

• Controls (Subwoofer): Crossover, Phase, Sub Gain

• Controls (Satellites): Bass & Treble

• Master Volume: Subwoofer and Satellites

• 3 Turn On Options: Normal, Auto On Sensing, 12V Trigger

• 12 Volt Trigger: In and Out

• Power Supply: Switchable 110-240V 50/60Hz

• Dimensions (L x D x H): 430mm/16.92” x 226mm/9.0” x

62.5mm/2.46”

• Weight: 2.7KG/5.95Lb.

A great alternative to an ugly or low-performance sound bar for your big screen TV. Simply connect the

amp to the headphone output of the TV and then connect to your speakers – either in-wall or normal box

speakers – and add a subwoofer. The sound will be much better, and with in-wall subwoofer and speakers

the look is much nicer.

This is also the perfect amp for an outdoor system that comprises main speakers and a passive subwoofer.

200 watts are available to power a subwoofer and 100 watts for each of two patio speakers.

The XSP2.1 can easily achieve the high sound levels of over 100dB from all channels. The additional

convenience of tone controls means you can ne-tune or customize the sound to suit your taste.

You can also use this amp to bring back to life an old sat/sub system where the amp has failed – not

uncommon. Simply bypass the built-in amp and connect the speaker to this amp and you have a working

system again.

OSD Audio | Brea, CA | osdaudio.com

Produkt Specifikationer

Mærke:	OSD Audio
Kategori:	Hi-Fi system
Model:	XSP2-1

Har du brug for hjælp?

Hvis du har brug for hjælp til OSD Audio XSP2-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hi-Fi system OSD Audio Manualer

OSD Audio XSP2-1 Manual

13 August 2025

OSD Audio Nero Stream ARC Manual

14 Januar 2025

OSD Audio Nero Stream WRA Manual

27 December 2024

OSD Audio Nero SRT1 GEN2 Manual

5 September 2024

OSD Audio Black SRT4 GEN2 Manual

5 September 2024

OSD Audio SoundSole 2.1 Manual

20 August 2024

OSD Audio PRE 1 Manual

19 August 2024

OSD Audio SRT4 Manual

19 August 2024

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer

Audizio RP111 Manual

13 August 2025

Samsung MX-D750D Manual

10 August 2025

Samsung MM-T8 Manual

10 August 2025

Yamaha CD-C603 Manual

10 August 2025

Auna MC 120 Manual

8 August 2025

Auna Harvard IR Manual

8 August 2025

Auna Belle Epoque Manual

8 August 2025

LD Systems MAUI 5 GO 100 Manual

8 August 2025

Renegade RXA 550 Manual

8 August 2025

LG LF-K3960Q Manual

7 August 2025