Overmax Camspot 4.1 Manual

Overmax Overvågningskamera Camspot 4.1

Læs gratis den danske manual til Overmax Camspot 4.1 (19 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Overmax Camspot 4.1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/19

User Manual

English

1. Connect the camera to a power source.

2. Connect the camera to the router using the supplied LAN cable.

- NOTE The first camera configuration must be carried out using a LAN

cable.

3. After the calibration the camera is available online. You can use a

smartphone, a tablet or a computer to connect with the camera.

NOTE - Both devices must be connected to the same network.

CONFIGURATION AND OPERATION USING PC:

To operate the camera using a PC you can choose the software available on

www.overmax.eu or a web browser such us IE or Firefox (it is recommended to

use IE).

1. Configuration and operation of the camera using IE web browser:

• Download Search_tool4.2 software from www.overmax.eu.

• Run the downloaded application. If the camera has been connected

properly, its name is displayed in the upper left corner of the screen, in

the DEVICE tab.

• -Double click the camera name (it is highlighted in blue).

• Then the IE browser with encrypted connection starts. Enter "admin" in

the "User name" field and Enter "888888" in the "Password" field.

• After the confirmation (the OK button) the page appears where you can

activate the camera operation via IE browser.

• To start the camera operation, click the link: „Sign in (for IE browser)”.

• To activate the camera's Wi Fi support go to Camera Configuration > -

Network Settings > WiFi Settings. Then press the Scan button to scan

for available wireless networks. From the Wireless Network List choose

the Wi-Fi network you are connected with, then enter the Wi-Fi

password into the "Share Key" field and press the "Submit" button.

Now you can disconnect the LAN cable from the camera.

2. Configuration and operation of the camera using DeviceClient

software:

• Download Device Client software from www.overmax.eu.

• Install it on the PC's hard drive and run it.

• From the "System" feature choose "Device list". Then, select "Open

search tools" in the Device screen.

• Click "Search". The name of the camera will be displayed in the

"Device" field. Double click it and then click OK button in the pop- -up

Produkt Specifikationer

Mærke:	Overmax
Kategori:	Overvågningskamera
Model:	Camspot 4.1
Kode for international beskyttelse (IP):	IP66
Type:	IP-sikkerhedskamera
Brugervejledning:	Ja
Produktfarve:	Hvid
Wi-Fi:	Ingen
Formfaktor:	Kugle
Understøttede videotilstande:	720p
Ethernet LAN:	Ja
Understøttede videoformater:	H.264
Driftstemperatur (T-T):	-20 - 50 °C
Maksimal opløsning:	1280 x 720 pixel
Forbindelsesteknologi:	Kabel & trådløs
AC-adapter inkluderet:	Ja
Indbygget HDD:	Ingen
Understøttet placering:	Udendørs
Understøttede mobile operativsystemer:	Android 2.3, Android 3.0, Android 3.1, Android 3.2, Android 4.0, Android 4.1, Android 4.2, Android 4.3, Android 4.4, Android 5.0, iOS 5.0, iOS 6.0, iOS 6.1, iOS 7.0, iOS 8.0, iOS 8.2
Fast brændvidde:	3.6 mm
Nattesyn:	Ja
LED type:	IR
Billedhastighed:	25 fps
Synsfelt vinkel (FOV):	60 °
Monteringssæt:	Ja
Bevægelsessensor:	Ja