Ozito AIN-PRO Manual

Ozito Skruemaskine AIN-PRO

Læs gratis den danske manual til Ozito AIN-PRO (2 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Ozito AIN-PRO, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

DESCRIPTION OF SYMBOLS SPARE PARTS

AIR IMPACT

WRENCH

1/2” Drive

INSTRUCTION MANUAL

SPECIFICATIONS

AIN-PRO

Max Air Pressure: 90psi (6Bar)

Av. Air Consumption: 141.5l/min (5cfm)

No Load Speed: 7,000/min

Max Torque: 312Nm

Air Inlet: 1/4“ BSP

Weight: 2.20kg

Spare parts can be ordered from the Special Orders

Desk at your local Bunnings Warehouse.

For further information, or any parts not listed here, visit

www.ozito.com.au or contact Ozito Customer Service:

Australia 1800 069 486

New Zealand 0508 069 486

Email: enquiries@ozito.com.au

Warning Read instruction

manual

Wear eye protection

No load speed

Wear ear protection

Revolutions or

reciprocation per minute

/min no

WARNING! Wear ear protectors with impact wrenches. Exposure to noise can cause

hearing loss.

• Bits, sockets and tools get hot during operation. It is recommended to wear gloves when

handling them.

• Do not overreach while operating the tool. Maintain a balanced working stance at all times.

• Do not use this tool for prolonged periods of time. Take regular breaks. Use gloves to provide

extra cushioning in order to avoid any injury from the vibrations of the tool.

GENERAL AIR TOOL SAFETY WARNINGS

AIR IMPACT WRENCH SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings

refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety

a. Cluttered or dark areas invite accidents. Keep work area clean and well lit.

b. Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust

or fumes.

c. Distractions can Keep children and bystanders away while operating a power tool.

cause you to lose control.

d. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewellery or long hair can be

caught in moving parts.

e. Check the maximum pressure rating of any tools or accessories that you intend using with

the compressor. The output pressure of the air from the compressor must be regulated so

that it never exceeds the rated pressure of the tool or accessory.

f. Always wear safety goggles or glasses when using the air compressor. Never point the

nozzle of an accessory towards any part of your body or towards another person.

g. Drain the moisture from the tank daily. It will help prevent corrosion.

h. Use safety equipment including safety goggles or shield, ear protection, breathing respirator

mask and protective clothing.

i. Air tools should not be used in a potentialy explosive environment.

j. Use safety equipment including safety goggles or shield, ear protection, breathing or

respirator mask and protective clothing.

k. The tool must be used only for its prescribed purpose. Any use other than those mentioned

in this Manual will be considered a case of misuse. The user and not the manufacturer

shall be liable for any damage or injury resulting from such cases of misuse.

WARNING! In the event that an air line is cut or broken, the air supply must be turned off

at the compressor. A broken air line which is not supported is extremely dangerous and

can whip around very quickly, both with the capability of striking people, and blowing foreign

particles into the air.

Do not attempt to catch the air line but immediately keep bystanders well clear and turn off the air

supply to the hose, turn off the compressor at the On / Off button, and then remove the hose from

the compressor.

This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given the supervision or instruction concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

1 1/2” Drive Socket Adaptor

2 Forward/Reverse Button

3 On/Off Trigger

4 Power Regulator

5 Air Inlet

KNOW YOUR PRODUCT

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Skruemaskine
Model:	AIN-PRO

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito AIN-PRO stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skruemaskine Ozito Manualer

Ozito PXIDS-300U Manual

10 August 2025

Ozito SDA-1100U Manual

14 August 2024

Ozito SDL-5000U Manual

6 August 2024

Ozito AIN-PRO Manual

29 Juli 2024

Ozito PXBWK-130U Manual

18 September 2023

Ozito SDU-5100U Manual

28 August 2023

Ozito OSDK-536 Manual

20 December 2022

Ozito HDR-7113 Manual

13 Oktober 2022

Ozito SDL-5000 Manual

10 Oktober 2022

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

Porter-Cable PCCK619L8 Manual

12 November 2025

Fischer FSS 18V 600 Manual

12 November 2025

Dedra DED7166 Manual

11 November 2025

Scheppach CID180-20Li Manual

10 November 2025

10 November 2025

8 November 2025

4 November 2025

3 November 2025

1 November 2025

30 Oktober 2025