Ozito HDR-7113 Manual

Ozito Skruemaskine HDR-7113

Læs gratis den danske manual til Ozito HDR-7113 (6 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Ozito HDR-7113, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

HAMMER

DRILL

710W

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 230 - 240V ~50Hz

Motor: 710W

Chuck Size: 13mm (½”) Keyless

No Load Speed: 0 - 2,900/min

Impact Rate: 0 - 46,400bpm

Drilling Capacity: 25mm (Timber)

13mm (Masonry)

10mm (Metal)

Weight: 1.95kg

HDR-7113

STANDARD EQUIPMENT

3 YEAR REPLACEMENT WARRANTY*

Your product is guaranteed for a period of If 36 months from the original date of purchase.

a product is defective it will be replaced in accordance with the terms of this warranty. Warranty

excludes consumable parts, for example: valve adapters and accessories.

*This product is intended for DIY use only and replacement warranty covers domestic use.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other than that speciﬁed on the tool.

• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents

or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.

ozito.com.au

Hammer Drill

Side Handle & Depth Rod

0721

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY

YOU MUST RETURN THE PRODUCT TO YOUR NEAREST

BUNNINGS WAREHOUSE WITH YOUR BUNNINGS

PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR

CUSTOMER SERVICE HELPLINE:

Australia: 1800 069 486

New Zealand: 0508 069 486

The beneﬁts provided under this warranty are in addition to other rights and remedies which

are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to a

replacement or refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the

goods fail to be of acceptable quality and the failure does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this warranty,

however, where you have suffered any additional direct loss as a result of a defective product

you may be able to claim such expenses by contacting our customer service helpline above.

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE

THE MODEL NUMBER AND DATE OF PURCHASE

AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE

WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS

YOU MAY HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

1. Depth Rod

2. Keyless Chuck

3. Chuck Collar

4. Mode Selector

5. Forward/Reverse Button

6. Lock-On Button

7. Power Cord

8. Variable Speed Trigger

9. Speed Selection Dial

10. 360° Side Handle

HAMMER DRILL

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

ONLINE MANUAL

Scan this QR Code with your mobile

device to take you to the online manual.

2 3 41 5 6

8 710

Attaching The Side Handle

The side handle provides additional comfort, control, and guidance

for the hammer drill.

1. Loosen the side handle by turning it

clockwise.

2. Slide the handle onto the

collar of the hammer drill.

Note: There is an indexing tab

on the right side of the drill.

Ensure that the indexing tab is

properly seated in one of the

slots in the side handle collar.

3. Adjust the handle so that it’s in a

comfortable working position, then

tighten it into place by turning the side

handle anti-clockwise.

Installing The Depth Rod

The depth rod helps to drill to a pre-determined depth.

1. Loosen the side handle slightly

by rotating it clockwise.

2. Adjust the depth rod so the bit

extends beyond the end of the

rod to the required drilling depth.

Note: The depth rod has grooves in

10mm increments as a guide.

3. Tighten the side handle to lock the

depth rod into place.

4. When the tip of the depth rod touches

the work surface you have drilled to the

required depth.

WARNING! ENSURE THE TOOL IS TURNED OFF AND

DISCONNECTED FROM THE POWER SUPPLY BEFORE

PERFORMING ANY OF THE FOLLOWING OPERATIONS.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Skruemaskine
Model:	HDR-7113

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito HDR-7113 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skruemaskine Ozito Manualer

Ozito SDA-1100U Manual

14 August 2024

Ozito SDL-5000U Manual

6 August 2024

Ozito AIN-PRO Manual

29 Juli 2024

Ozito PXBWK-130U Manual

18 September 2023

Ozito SDU-5100U Manual

28 August 2023

Ozito OSDK-536 Manual

20 December 2022

Ozito HDR-7113 Manual

13 Oktober 2022

Ozito SDL-5000 Manual

10 Oktober 2022

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

Milwaukee M12 BLIDRC Manual

16 Juni 2025

RYOBI FVD01 Manual

16 Juni 2025

Milwaukee M18 BLHIWF12 Manual

16 Juni 2025

Draper D20 55375 Manual

16 Juni 2025

Milwaukee M12 BLDDRC Manual

16 Juni 2025

Draper Storm Force 89518 Manual

8 Juni 2025

Draper 83745 Manual

8 Juni 2025

Draper 70332 Manual

8 Juni 2025

Draper 70260 Manual

7 Juni 2025

Draper D20 99250 Manual

7 Juni 2025