Ozito HPW-2030 Manual

Ozito Højtryksrenser HPW-2030

Læs gratis den danske manual til Ozito HPW-2030 (8 sider) i kategorien Højtryksrenser. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Ozito HPW-2030, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
HIGH PRESSURE
WASHER
2030psi 1800W
INSTRUCTION MANUAL
SPECIFICATIONS
Input Voltage: 220–240V ~ 50Hz
Wattage: 1800W
Permissible Pressure: 14MPa (2030psi)
Rated Pressure: 10MPa (1450psi)
Rated Flow: 6.0 L/min
Max. Flow: 7.0 L/min
Water Inlet Pressure: 1.2MPa (174psi) Max.
Water Inlet Temp.: 50 C Max.°
Noise Rating: 90dB
IP Rating: IPX5
Tool Weight: 5.7kg
HPW-2030
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: O-rings,
bearings and accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
High Pressure Washer &
Transport Wheels
5m High Pressure Hose, Spray
Gun & Extension Lance
Handle, Spray Gun Holder,
4 x Screws, Accessories Holder
Adjustable Spray Nozzle, Hose
Adaptor, Cleaning Needle
0920
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
Attaching the Transport Handle
1. Slide the base of the
handle into the tabs on the
top of the unit.
2. Insert two of the screws
(supplied) through the tabs
and into the handle.
3. Using a Phillips head
screwdriver, tighten the
screws into place.
1. Transport Handle
2. Power Cord Hook
3. Spray Gun Holder
4. Pressure Washer Housing
5. On/O Dial
6. Hose Quick-Release
7. Water Outlet Port
8. Transport Wheels
HIGH PRESSURE WASHER
ACCESSORIES
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
9. Pressure Hose
10. Adjustable Spray Nozzle
11. Spray Gun
12. Hose Adaptor
13. Cleaning Needle
14. Extension Lance
11 12 1310
2
3
4
1
5
6
7
8
9 14
WARNING! ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Attaching the Spray Gun Holder
1. Slide the Spray Gun holder
into position on the transport
handle.
Attaching the Accessory Holder
1. Slide the accessory holder
into the tabs on the rear of
the unit.
2. Insert the remaining two
screws (supplied) through
the holder and into the
tabs.
3. Using a Phillips head
screwdriver, tighten the
screws into place.

Produkt Specifikationer

Mærke: Ozito
Kategori: Højtryksrenser
Model: HPW-2030

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito HPW-2030 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højtryksrenser Ozito Manualer

Ozito

Ozito HPW-2320K Manual

13 Juni 2025
Ozito

Ozito PXPWS-1824 Manual

10 Marts 2025
Ozito

Ozito PXPWK-2524 Manual

1 September 2024
Ozito

Ozito HPW-2030 Manual

14 August 2024
Ozito

Ozito PWE-1300U Manual

6 August 2024
Ozito

Ozito HPW-1885K Manual

24 Juli 2024
Ozito

Ozito PWE-1500U Manual

30 April 2024

Højtryksrenser Manualer

Nyeste Højtryksrenser Manualer

Lavor

Lavor FAST Extra 145 Manual

14 August 2025
Lavor

Lavor Cruiser 140 Manual

13 August 2025
Lavor

Lavor HNR XL Manual

13 August 2025
Kärcher

Kärcher K 3 HR Car & Deck Manual

13 August 2025
Lavor

Lavor LANDER 3000 Manual

12 August 2025
Makita

Makita HW001G Manual

11 August 2025
Sun Joe

Sun Joe BDL-A0214 Manual

10 August 2025
Stihl

Stihl RE 462 Manual

9 August 2025
Westinghouse

Westinghouse WPX3400e Manual

7 August 2025
Westinghouse

Westinghouse WPX2300e Manual

7 August 2025