Ozito OHT-0185 Manual
Ozito
Hækkeklipper
OHT-0185
Læs nedenfor 📖 manual på dansk for Ozito OHT-0185 (8 sider) i kategorien Hækkeklipper. Denne guide var nyttig for 21 personer og blev bedømt med 3.9 stjerner i gennemsnit af 11 brugere
Side 1/8
CORDLESS HEDGE
TRIMMER KIT
18V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V
Cutting Length: 460mm
Cutting Capacity: Ø14mm
Battery: 1.5Ah Li-Ion
Charge Time: 4-5 Hours
No Load Speed: 2,400/min
Weight: 2.4kg
OHT-0185
STANDARD EQUIPMENT
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
ozito.com.au
0119
Hedge Trimmer
Blade Cover
Battery Pack & Charger
Safety Guard & Screws x 2
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself) use
only. If a product is defective it will be replaced in accordance with
the terms of this warranty. Lithium Ion batteries are covered by a 12
month warranty. Warranty excludes consumable parts, for example:
blade cover.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction
manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
ChargingCharged ChargingCharged
Front Handle & Screws x 2
3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
9
Blade Cover
The blade cover protects
the blade when not in use.
Simply slide it off the blade
before use. Once nished
operating, place the cover
back over the blade.
1. Battery seating
2. Sure grip handle
3. On/off trigger
4. Safety switch
5. Front handle
6. Safety guard
7. Dual action cutting blades
8. Impact guard
9. Battery release button
10. Battery charge indicators
11. Charge indicator button
12. Charger cradle
13. Charger LED indicators
14. Charger adaptor
15. Blade cover
CORDLESS HEDGE TRIMMER
ACCESSORIES
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
CAUTION! ENSURE THE TOOL IS OFF & THE BATTERY
REMOVED BEFORE PERFORMING ANY OF THE
FOLLOWING TASKS.
13 4 5 7 86
WARNING! NEVER START THE HEDGE TRIMMER
WHILE THE BLADE COVER IS FITTED.
13 15
12 14
WARNING! NEVER USE THE HEDGE TRIMMER
UNLESS THE SAFETY GUARD IS PROPERLY
FITTED.
WARNING! WHEN HANDLING THE BLADE
ASSEMBLY, WEAR NON-SLIP, HEAVY DUTY
PROTECTIVE GLOVES. DO NOT PLACE YOUR
HAND OR FINGERS BETWEEN THE BLADES OR IN
ANY POSITION WHERE THEY COULD GET
PINCHED OR CUT. NEVER TOUCH BLADES OR
SERVICE THE UNIT WITH THE BATTERY PACK
INSTALLED.
1110
Cha rgingCha rged Cha rgingCha rged
Fitting the Safety Guard
Slide the safety guard onto the
front of the motor housing, just
above the blade. Ensure that
the holes in the guard align
with the two holes in the motor
housing. Secure in place with
two screws provided.
Fitting the Front Handle
Slide the front handle onto
the front of the motor housing,
ensure that the holes in the
handle align with the two holes
in the motor housing. Secure in
place with two screws provided.
2
Produkt Specifikationer
| Mærke: | Ozito |
| Kategori: | Hækkeklipper |
| Model: | OHT-0185 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Ozito OHT-0185 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Hækkeklipper Ozito Manualer
10 Oktober 2024
2 Oktober 2024
1 September 2024
25 August 2024
25 August 2024
15 August 2024
14 August 2024
12 August 2024
12 August 2024
8 August 2024
Hækkeklipper Manualer
- Hækkeklipper Sterwins
- Hækkeklipper Sun Joe
- Hækkeklipper Powerworks
- Hækkeklipper Gardena
- Hækkeklipper Grizzly
- Hækkeklipper Kaaz
- Hækkeklipper Kress
- Hækkeklipper Challenge Xtreme
- Hækkeklipper Qualcast
- Hækkeklipper Ferrex
- Hækkeklipper Gtech
- Hækkeklipper Powerpeak
- Hækkeklipper DeWalt
- Hækkeklipper Efco
- Hækkeklipper Zipper
Nyeste Hækkeklipper Manualer
10 Juni 2025
31 Maj 2025
3 April 2025
29 Marts 2025
12 Januar 2025
12 Januar 2025
7 Januar 2025
5 Januar 2025
2 Januar 2025
31 December 2025