Ozito PTP-165 Manual

Ozito Pumpe PTP-165

Læs gratis den danske manual til Ozito PTP-165 (8 sider) i kategorien Pumpe. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om Ozito PTP-165, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
1
INSTRUCTION MANUAL
PTP-165
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
1 YEAR WARRANTY
Your product is guaranteed for a period of 12 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be repaired in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: o-rings, bearing, seals, gaskets and adaptors.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
6.3HP
PETROL
TRANSFER
WATER PUMP
208cc 4 STROKE
SPECIFICATIONS
Engine: 4 Stroke, air cooled
Engine Output: 4.6kW (6.3HP)
Fuel Type: Unleaded petrol
Displacement: 208cc
Max. Flow Rate: 23,000l/h
Max. Head: 26m
Max. Lift: 6.5m
Inlet/Outlet: 50.8mm (2”)
Delivery Pressure: 2.6 bar
Fuel Tank: 3.6L
Weight: 21.5kg
Funnel & Screwdriver
Fasteners & Adaptors
ozito.com.au
Spark Plug Wrench &
Filter
Petrol Pump
0120
6.3HP
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
8. On/Off Switch
9. Oil Fill Plug
10. Oil Drain Plug
11. Priming Cap
12. Discharge Outlet
13. Suction Inlet
14. Drain Screw
6.3HP
1. CONNECTING THE INLET
WARNING! ENSURE THE ENGINE IS SHUT OFF AND
THE ON/OFF SWITCH IS IN THE OFF POSITION BEFORE
PERFORMING ANY OF THE FOLLOWING ASSEMBLY.
Connecting the Suction Inlet
1. Placethelter
assembly into the
intake end of a
suction hose (not
included) and secure
with a hose clamp
tightly.
2. Insert a 50.8mm
hose adaptor and an
o-ring into one of the
collars and fasten to
the outlet side of the
suction hose using a
hose clamp.
3. Screw the hose adaptor and
collar tightly onto the pumps
inlet in a clockwise direction to
secure in place.
Note: Teontape(notsupplied)is
recommended on threads
to ensure a water tight seal
and prevent any leakage.
The inlet allows for a 50.8mm (2”) supply line to be connected and is
capable of a maximum suction height of 6.5m.
WARNING!: AVOID POSITIONING THE INLET PIPE
HIGHER THAN THE PUMP, AS THIS WOULD DELAY THE
ESCAPE OF AIR BUBBLES FROM THE INLET PIPE.
WARNING!: THE INPUT HOSE OR PIPE SHOULD BE
LOW ENOUGH IN THE WATER TO ENSURE THAT IF THE
WATER LEVEL FALLS, THE PUMP WILL NOT RUN DRY.
ENSURE THAT THIS IS CHECKED WHEN IN OPERATION.
15. Screwdriver
16. Spark Plug Wrench
17. Filter, 50.8mm Barb
18. Collars
19. O-rings
20. Hose Adaptor 25.4mm
21. Hose Adaptors 40mm
22. Hose Adaptors 50.8mm
23. Hose Clamps 50.8mm
24. Funnel
KNOW YOUR PRODUCT SETUP & PREPARATION
PETROL TRANSFER WATER PUMP
ACCESSORIES
1
11
6
2
12
15
7
3
13
16
8
4
14
17 18 19 20 21 22 23 24
9
5
10
1. Air Filter
2. Throttle Lever
3. Choke Lever
4. Fuel Lever
5. Recoil Starter
6. Fuel Cap
7. Fuel Tank

Produkt Specifikationer

Mærke: Ozito
Kategori: Pumpe
Model: PTP-165

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PTP-165 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Pumpe Ozito Manualer

Ozito

Ozito PSCP-1100 Manual

15 Februar 2024
Ozito

Ozito TRP-650 Manual

8 August 2023
Ozito

Ozito CPPAS-800 Manual

25 Maj 2023
Ozito

Ozito TPIK-025 Manual

24 Marts 2023
Ozito

Ozito PSDW-350 Manual

25 Oktober 2022
Ozito

Ozito SBP-0121 Manual

21 Oktober 2022
Ozito

Ozito SPIK-2510 Manual

13 Oktober 2022
Ozito

Ozito SWPP-800 Manual

13 Oktober 2022
Ozito

Ozito PTP-165 Manual

5 Oktober 2022

Pumpe Manualer

Nyeste Pumpe Manualer

Sauermann

Sauermann PE-5000 Manual

13 August 2025
Sauermann

Sauermann OMEGA Pack Manual

13 August 2025
Sauermann

Sauermann Si-51 Manual

13 August 2025
Fieldmann

Fieldmann FVC 8520-EC Manual

12 August 2025
Fieldmann

Fieldmann FVC 8560-EC Manual

12 August 2025
Sauermann

Sauermann SI-1931 Manual

12 August 2025
Daikin

Daikin EWWDC19VZSSA2 Manual

11 August 2025
Daikin

Daikin EWWD610VZXSA1 Manual

11 August 2025
Siemens

Siemens WQ32G2ALDN Manual

8 August 2025
Siemens

Siemens WT45RHC5DN Manual

7 August 2025