Ozito PXBMK-4047SP Manual

Ozito Plæneklipper PXBMK-4047SP

Læs gratis den danske manual til Ozito PXBMK-4047SP (13 sider) i kategorien Plæneklipper. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Ozito PXBMK-4047SP, eller vil du spørge andre brugere om produktet?

Side 1/13
PXBMS-3647SP
Brushless Lawn Mower
Safety Key & Cable Clips
Top Handle
Lower Handle
Handle Assembly Fasteners &
Spanner
STANDARD EQUIPMENT
WARRANTY
0523
SELF-PROPELLED
LAWN MOWER
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 2 x 18V
Cutting Diameter: 460mm (18”)
Cutting Heights: 25 - 80mm, 9 position
No Load Speed: 2,900/min
Grass Catcher: 50 litres
Noise Rating: 96dB
Tool Weight: 23kg
ozito.com.au
BRUSHLESS
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
WARNING
The following actions will result in the warranty being
void.
If the tool has been operated on a supply voltage other
than that specied on the tool.
If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.
Professional, industrial or high frequency use.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: wheels, blade,
cord clips, bearings etc.
OZITO. 25 Fox Drive, Dandenong South, Victoria 3175, Australia
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
11. Safety Key
12. Cable Clip x 3
13. Nut x 4
14. Upper Handle Knob x 2
15. Round Head Bolt-Short x 2
16. Round Head Bolt-Long x 2
17. Spanner
18. CSK Bolt x 2
1. Wheel Drive Lever
2. Top Handle
3. Safety Switch
4. Start/Stop Motor Lever
5. Grass Catcher
6. Lower Handle
7. Catcher Flap
8. Battery Cover
9. Cutting Height Adjustment Lever
10. Cutting Deck
BRUSHLESS LAWN MOWER
KNOW YOUR PRODUCT
192 3
15
4
12
567 8
11
1. ASSEMBLY
SETUP & PREPARATION
1. Place the lower handle over the
outside of the mower handle
brackets aligning the upper holes
in the handle and each bracket.
Fit the CSK bolt through mounting
brackets then through hole in each
side of lower handle.
Fitting the Lower Handle
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
BATTERIES ARE DISCONNECTED BEFORE PERFORMING
ANY OF THE FOLLOWING TASKS.
ACCESSORIES
2. There are three holes
remaining in each bracket,
select the appropriate hole for
the height of the user.
BATTERY & CHARGER
This tool is compatible with all batteries and chargers from
the Ozito PXC Range.
Fitting the Upper Handle
1. Place the upper handle
over the lower handle.
Fit long round head bolts
through the lower handle
and then through the
upper handle.
3. Fit the short round head bolt
through the brackets and then
through the lower handle.
Secure each bolt with the 4
nuts and spanner provided.
2. Secure knobs over
the protruding ends
of the bolts.
13 14 16 17 18
10


Produkt Specifikationer

Mærke: Ozito
Kategori: Plæneklipper
Model: PXBMK-4047SP

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXBMK-4047SP stil et spørgsmål nedenfor, og andre brugere vil svare dig




Plæneklipper Ozito Manualer

Ozito

Ozito CPM-300C Manual

10 December 2024
Ozito

Ozito PXBMK-4047SP Manual

31 August 2024
Ozito

Ozito ELM-1230 Manual

16 August 2024
Ozito

Ozito ESA-1231U Manual

15 August 2024
Ozito

Ozito PXCLMK-218U Manual

13 August 2024
Ozito

Ozito PXCLMK-418U Manual

12 August 2024
Ozito

Ozito LMPC-301U Manual

12 August 2024
Ozito

Ozito ELM-1250U Manual

11 August 2024
Ozito

Ozito ELM-1230U Manual

7 August 2024

Plæneklipper Manualer

Nyeste Plæneklipper Manualer