Ozito PXGTPS-0182 Manual

Ozito Pomp PXGTPS-0182

Læs gratis den danske manual til Ozito PXGTPS-0182 (6 sider) i kategorien Pomp. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Ozito PXGTPS-0182, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

STANDARD EQUIPMENT

PXGTPS-0182

INSTRUCTION MANUAL

SPECIFICATIONS

Input Power: 18V x 2

Flow Rate Max.: 3000 l/h

Suction Height Max.: 8m

Delivery Height Max.: 26m

Delivery Pressure Max.: 2.6 bar

Water Temperature. 1 C - 35 C° °

Inlet & Outlet: 25mm (1”)

Noise Rating: 76 dB

Weight: 3.3kg

ozito.com.au

0720

Garden Transfer Pump

GARDEN

TRANSFER PUMP

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts, for example: O-rings, bearings, seals, gaskets .

BATTERY & CHARGER

This tool is compatible with all battery and chargers from the Ozito

Power X Change Range.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to the

online manual.

1. Battery Cover

2. Carry Handle

3. Pump Setting Switch

4. Discharge Outlet

5. Priming Plug

6. Drain Plug

7. Suction Inlet

CORDLESS GARDEN TRANSFER PUMP

KNOW YOUR PRODUCT

1. INLET & OUTLET

SETUP & PREPARATION

1 2 3 4 5

6 7

WARNING!: ENSURE THE TOOL IS OFF AND THE

BATTERIES ARE REMOVED BEFORE PERFORMING

ANY OF THE FOLLOWING OPERATIONS.

1. Thread seal tape (not included) is

required on threads to ensure a

water tight seal and prevent any

leakage. Wind thread seal tape

clockwise on ttings.

Note: The input hose or pipe you are using must have a minimum diameter

of 25.4mm (1”).

Preparing the Pump: Your pump requires no assembly

before use other than the connection of a suitable inlet/

outlet hose and hose connections (not included).

2. Remove the plastic protection

cover from the suction inlet

and insert a 25.4mm ( 1”)

male threaded hose adaptor

(not included). Tighten rmly

with a spanner (not included).

3. Securely attach the input

hose or pipe to the other

end of the adaptor. Ensure

you have the correct

diameter hose or pipe that is

compatible with your water

drawing source.

WARNING!: ENSURE THE INPUT HOSE OR PIPE

IS NOT RESTRICTED IN ANY WAY.

Connecting Hose or Pipe to the Suction Inlet

Note: A leaking hose or pipe will draw in air and therefore not draw in any

water.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Pomp
Model:	PXGTPS-0182

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXGTPS-0182 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Pomp Ozito Manualer

Ozito PTP-012A Manual

15 Oktober 2024

Ozito CPP-802 Manual

10 August 2024

Ozito PTP-425 Manual

8 August 2024

Ozito PSDW-750 Manual

3 August 2024

Ozito PFFP-65E Manual

30 Juli 2024

Ozito PSA-001 Manual

25 Juli 2024

Ozito PXGTPS-0182 Manual

22 Juli 2024

Pomp Manualer

Nyeste Pomp Manualer

Little Giant OPWG-29 Manual

1 April 2025

Interphone Air Pump 3000 Manual

1 April 2025

Grundfos UPS 20-60 N 150 Manual

1 April 2025

Grundfos UPS 40-50 FN 250 Manual

1 April 2025

Grundfos MTA 120-280 Manual

1 April 2025

Grundfos DMX 860-5 Manual

1 April 2025

Grundfos UPM4 Manual

1 April 2025

Grundfos DMH 880-10 Manual

1 April 2025

Grundfos MTA 200-280 Manual

1 April 2025

Grundfos MTSE 40-66 Manual

1 April 2025