Ozito TSS-3100U Manual

Ozito Sander TSS-3100U

Læs gratis den danske manual til Ozito TSS-3100U (3 sider) i kategorien Sander. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Ozito TSS-3100U, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

size 445 x 210 mm

Danger! - Read the operating instructions to re-

duce the risk of inquiry

Caution! Wear ear-mus. The impact of noise

can cause damage to hearing.

Caution! Wear a breathing mask. Dust which

is injurious to health can be generated when

working on wood and other materials. Never use

the device to work on any materials containing

asbestos!

Caution! Wear safety goggles. Sparks gene-

rated during working or splinters, chips and dust

emitted by the device can cause loss of sight.

The reprinting or reproduction by any other me-

ans, in whole or in part, of documentation and

papers accompanying products is permitted only

with the express consent of the iSC GmbH.

Subject to technical changes

TSS-3100U

GB Additonal operating & safety instructions Third Sheet Orbital Sander

Service information

We have competent service partners in all countries named on the guarantee certicate whose contact

details can also be found on the guarantee certicate. These partners will help you with all service re-

quests such as repairs, spare and wearing part orders or the purchase of consumables.

Please note that the following parts of this product are subject to normal or natural wear and that the

following parts are therefore also required for use as consumables.

Category Example

Wear parts* Carbon brushes, grinding/sanding plate

Consumables* Grinding/sanding paper

Missing parts

* Not necessarily included in the scope of delivery!

In the eect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Plea-

se ensure that you provide a precise description of the problem and answer the following questions in all

cases:

• Did the equipment work at all or was it defective from the beginning?

• Did you notice anything (symptom or defect) prior to the failure?

• What malfunction does the equipment have in your opinion (main symptom)?

Describe this malfunction.

Nigel Yang/Product-ManagementAndreas Weichselgartner/General-Manager

explains the following conformity according to EU directives and norms for

the following product

Third Sheet Sander TSS-3100U (Ozito)

X 2006/42/EC

Annex IV

Noti ed Body:

Noti ed Body No.:

Reg. No.:

2000/14/EC_2005/88/EC

Annex V

Annex VI

Noise: measured LWA = dB (A); guaranteed LWA = dB (A)

P = KW; L/Ø = cm

Noti ed Body:

2012/46/EC

Emission No.:

Standard references: EN 62841-1; EN 62841-2-4; EN 55014-1;

EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 62321

Landau/Isar, den 11.12.2019

First CE: 17 Archive-File/Record: NAPR014300

Art.-No.: 44.722.33 I.-No.: 11016 Georg RiedelDocuments registrar:

Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar

2014/29/EU

2005/32/EC_2009/125/EC

(EU)2015/1188

2014/35/EU

2006/28/EC

X 2014/30/EU

2014/32/EU

2014/53/EU

2014/68/EU

(EU)2016/426

Noti ed Body:

(EU)2016/425

X 2011/65/EU_(EU)2015/863

ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar

Declaration of conrmity

Beiblatt_TSS_3100U.indd 1

Beiblatt_TSS_3100U.indd 1Beiblatt_TSS_3100U.indd 1 12.12.2019 09:51:57

12.12.2019 09:51:57

12.12.2019 09:51:5712.12.2019 09:51:57

size 445 x 210 mm

Items supplied

Please check that the article is complete as

specied in the scope of delivery. If parts are

missing, please contact our service center or the

sales outlet where you made your purchase at

the latest within 5 working days after purchasing

the product and upon presentation of a valid bill

of purchase. Also, refer to the warranty table in

the service information at the end of the operating

instructions.

• Open the packaging and take out the equip-

ment with care.

• Remove the packaging material and any

packaging and/or transportation braces (if

available).

• Check to see if all items are supplied.

• Inspect the equipment and accessories for

transport damage.

• If possible, please keep the packaging until

the end of the guarantee period.

Danger!

The equipment and packaging material are

not toys. Do not let children play with plastic

bags, foils or small parts. There is a danger of

swallowing or suocating!

Proper use

The machine is designed for the grinding/san-

ding of wood, metal, plastic and similar materials

using the appropriate grinding/sanding paper.

The equipment is not suitable for wet grinding/

sanding.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a

case of misuse. The user / operator and not the

manufacturer will be liable for any damage or inju-

ries of any kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial

applications. Our warranty will be voided if the

machine is used in commercial, trade or industrial

businesses or for equivalent purposes.

Technical data

Voltage 230-240 V ~ 50 Hz ....................................

Power input ................................................150 W

Grinding/sanding area 187 x 90 mm .....................

Abrasive paper size 240 x 93 mm .........................

Oscillating speed 11,000/min ................................

Oscillatory circuit 1.5 mm .....................................

Protection class: II/ ............................................ &

Sound and vibration

Sound and vibration values were measured in

accordance with EN 62841.

LpA sound pressure level ..................... 78.2 dB(A)

KpA uncertainty ............................................. 3 dB

LWA

sound power level ....................... 89.2 dB(A)

KWA uncertainty .............................................3 dB

Wear ear-mus.

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 62841.

Handle

Vibration emission value ah = 7.119 m/s2

K uncertainty = 1.5 m/s2

The stated vibration emission levels and stated

noise emission values were measured in accor-

dance with a set of standardized criteria and can

be used to compare one power tool with another.

The stated vibration emission levels and stated

noise emission values can also be used to make

an initial assessment of exposure.

Warning:

The vibration and noise emission levels may vary

from the level specied during actual use, depen-

ding on the way in which the power tool is used,

especially the type of workpiece it is used for.

Keep the noise emissions and vibrations to a

minimum.

• Only use appliances which are in perfect wor-

king order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever

necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in ac-

cordance with instructions, certain residual

risks cannot be rules out. The following ha-

zards may arise in connection with the equip-

ment’s construction and layout:

1. Lung damage if no suitable protective dust

mask is used.

2. Damage to hearing if no suitable ear protecti-

on is used.

3. Health damage caused by hand-arm vibra-

tions if the equipment is used over a pro-

longed period or is not properly guided and

maintained.

For EU countries only

Never place any electric power tools in your

household refuse.

To comply with European Directive 2012/19/EC

concerning old electric and electronic equipment

and its implementation in national laws, old elec-

tric power tools have to be separated from other

waste and disposed of in an environment-friendly

fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to

the manufacturer, the owner of the electrical

equipment must make sure that the equipment

is properly disposed of if he no longer wants to

keep the equipment. The old equipment can be

returned to a suitable collection point that will

dispose of the equipment in accordance with the

national recycling and waste disposal regulations.

This does not apply to any accessories or aids

without electrical components supplied with the

old equipment.

Beiblatt_TSS_3100U.indd 2

Beiblatt_TSS_3100U.indd 2Beiblatt_TSS_3100U.indd 2 12.12.2019 09:51:57

12.12.2019 09:51:57

12.12.2019 09:51:5712.12.2019 09:51:57

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Sander
Model:	TSS-3100U

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito TSS-3100U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sander Ozito Manualer

Ozito DSR-3000 Manual

4 Oktober 2024

Ozito BSR-7000U Manual

31 August 2024

Ozito PXMSS-700U Manual

31 August 2024

Ozito TSS-3100U Manual

17 August 2024

Ozito HSS-5000U Manual

16 August 2024

Ozito QSS-1000U Manual

15 August 2024

Ozito ROS-2000U Manual

15 August 2024

Ozito DSR-2500U Manual

13 August 2024

Ozito DSR-2100U Manual

12 August 2024

Ozito PXROS-125U Manual

10 August 2024

Sander Manualer

Nyeste Sander Manualer

Bosch GSS 140 A Manual

15 Januar 2025

Hazet 9032M-53 Manual

1 Januar 2025

Alpha Tools DS 150 Manual

28 December 2024

Alpha Tools BBS 240 Manual

28 December 2024

Alpha Tools NTS 150/200 Manual

28 December 2024

RIKON 50-300 Manual

27 December 2024

RIKON 50-120 Manual

27 December 2024

RIKON 50-161VS Manual

27 December 2024

RIKON 50-112 Manual

27 December 2024

RIKON 50-151 Manual

27 December 2024