PAC APH-CH03 Manual
PAC
Hi-Fi system
APH-CH03
Læs gratis den danske manual til PAC APH-CH03 (2 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 11 anmeldelser. Har du et spørgsmål om PAC APH-CH03, eller vil du spørge andre brugere om produktet?
Side 1/2
Speaker connection harness for select
Alfa Romeo, Chrysler, Dodge, Jeep, Maserati and Ram
vehicles with factory amplied sound systems
C
Rev: v.1
Date:42220 Page 1
Copyright © 2020. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
APH-CH03
Introduction and Features
The APH-CH03 simplies speaker wire connections when adding aftermarket ampliers. Aftermarket ampliers can
be easily added with no need to cut or modify a vehicle’s original wiring. This harness has an additional feature of
deactivating the active noise cancellation (ANC) system in applicable vehicles that are equipped with it. Each pair of
speaker wires has been labeled with a number to help with tracking what vehicle speaker corresponds to it.
Installation Notes
1. All connectors should be plugged in when using this wiring harness in order for the ANC deactivation feature to work properly.
2. Not all applicable vehicles will come equipped with a corresponding speaker for all of the wires populated in our harness. It is
important to understand which speakers the vehicle is equipped with.
3. The positive polarity speaker wires on the APH-CH03 are indicated by a solid color.
4. The negative polarity speaker wires on the APH-CH03 are indicated by a stripe running along the length of the wire.
5. If you are leaving any of the factory speakers connected to the factory amplier, simply connect the speaker wires (color for
color) between the male and female connectors. For example, If you want speakers 3 and 4 to be powered by the factory
amplier, simply connect the Yellow and Yellow / Black, Green and Green / Black wires from the male connector to the Yellow
and Yellow / Black, Green and Green / Black wires from the female connector.
1. Locate the vehicles factory amplier and disconnect the White 22-pin, Gray 22-pin and Gray 10-pin connectors.
2. Connect the APH-CH03 harness to the connectors that were disconnected in the previous step.
3. Connect the male connectors from the APH-CH03 to the amplier.
4. Use a tone generator (PAC Part# TL-PTG2) to verify what speakers in the vehicle correspond to the speaker numbers on the
harness.
5. Use the wiring chart in this manual to write down what speaker in the vehicle corresponds to the speaker numbers labeled on
the APH-CH03. For example, after testing with a tone generator you found that the Red and Red/Black wires labeled Speaker
1 correspond with the Front Left Tweeter in the Vehicle; you then write down Front Left Tweeter in the Speaker Description
box for Speaker 1.
6. Connect the longer loose wires from the APH-CH03 to your aftermarket amplier or passive crossovers according to the tables
in this manual that were lled out in the previous step.
Installation Steps
Wiring Chart
Wire Color Polarity Label Text Speaker Description
Red +
Red / Black -
Orange +
Orange / Black -
Yellow +
Yellow / Black -
Green +
Green / Black -
Blue +
Blue / Black -
Purple +
Purple / Black -
Pink +
Pink / Black -
Light Green +
Light Green / Black -
White +
White / Black -
Gray +
Gray / Black -
Brown +
Brown / Black -
Black +
Black / White -
Speaker 12
Speaker 1
Speaker 2
Speaker 3
Speaker 4
Speaker 5
Speaker 6
Speaker 7
Speaker 8
Speaker 9
Speaker 10
Speaker 11
Speaker connection harness for select
Alfa Romeo, Chrysler, Dodge, Jeep, Maserati and Ram
vehicles with factory amplied sound systems
C
Rev: v.1
Date:42220 Page 2
Copyright © 2020. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
APH-CH03
Wiring Overview
Harnesses A and B (Gray 10-pin Connectors):
Harness C (White 22-pin Connectors):
Harness D (Gray 22-pin Connectors):
Connect to aftermarket amplier
or passive crossover.
Connect to aftermarket amplier
or passive crossover.
OE Amplier Outputs:
Connect corresponding colored
wires for any speakers you wish
to remain OE amplied.
OE Amplier Outputs:
Connect corresponding colored
wires for any speakers you wish
to remain OE amplied.
Email: support@PAC-audio.com
Phone: 866-931-8021
International: 727-592-5991
Technical Support
Produkt Specifikationer
| Mærke: | PAC |
| Kategori: | Hi-Fi system |
| Model: | APH-CH03 |
Har du brug for hjælp?
Hvis du har brug for hjælp til PAC APH-CH03 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Hi-Fi system PAC Manualer
Hi-Fi system Manualer
- Samson
- Camry
- Scosche
- Aquatic AV
- SilverCrest
- Clarion
- Logik
- Sonoro
- Power Dynamics
- Roadstar
- Roku
- Glide Gear
- Gemini
- Swissvoice
- Audio Pro
Nyeste Hi-Fi system Manualer
4 Juli 2025
21 Juni 2025
19 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
14 Juni 2025
14 Juni 2025