Palmer AoC Loom XLRf Manual

Palmer Ikke kategoriseret AoC Loom XLRf

Læs gratis den danske manual til Palmer AoC Loom XLRf (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Palmer AoC Loom XLRf, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Palmer® is a registered brand of the Adam Hall Group

Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany

Adam Hall Ltd. | The Seedbed Bus. Centre | SS3 9QY Essex | UK

info@adamhall.com | adamhall.com

Designed and engineered in Germany, assembled in P.R.C.

PAOCLXLRF

AUDIO OVER CAT MULTICORE ADAPTER CABLE FROM ETHERCON TO 4 × XLR FEMALE

INTRODUCTION

This Palmer AoC product was developed to transmit audio signals reliably

over long distances without loss or hum via Cat cable. Up to four bal-

anced analogue channels or up to eight channels in digital AES3 format

can be transmitted. The compact and modular design is suitable for a

wide range of applications in the studio, on stage and in permanent instal-

lations. This product is suitable for use with phantom power. Preferably use

balanced cables for analogue signal transmission, as these are significantly

less susceptible to interference than unbalanced cables. Digital signal

transmission in AES3 format requires balanced cabling.

CONNECTIONS

Plug a shielded Cat cable (Cat5e or better) with etherCON connectors (or

compatible) into the etherCON socket and connect the other end of the

cable to another Palmer AoC Loom (e.g. PAOCLXLRM), a Palmer AoC Box or

another suitable Palmer device with an AoC interface (or other devices with

AES72 type 5E pin assignment).

There are four female 3-pin XLR connectors (channel 1 - 4) at the end of the

breakout cable. Connect these to microphones, DI boxes, audio players etc.

or to the AES3 outputs of a digital playback device. Various devices can be

used simultaneously.

INTENDED USE

This product is a device for event technology, as well as studio, TV and broadcast!

This product has been developed for professional use in the ﬁeld of event technology,

studio, TV and broadcast. It is not suitable for household use!

Furthermore, this product is only intended for qualiﬁed users with specialist knowledge of

event technology, as well as studio, TV and broadcast!

Use of the product outside the speciﬁed technical data and operating conditions is

considered improper use!

Liability for damage and third-party damage to persons and property due to inappropria

te use is excluded!

The product is not suitable for:

- Persons (including children) with limited physical, sensory or mental abilities or lack of

experience and knowledge.

- Children (children must be instructed not to play with the product).

SAFETY INSTRUCTIONS

1. Please read this manual carefully.

2. Keep all information and instructions in a safe place.

3. Follow the instructions.

4. Use the device in the prescribed manner only.

5. Do not open the device and do not perform any modifications.

CHOKING HAZARD! KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT CONTAINS

SMALL PARTS THAT CAN BE SWALLOWED AS WELL AS PACKAGING MATERIAL THAT CAN BE

SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF THE REACH OF CHILDREN!

MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY

Our current warranty conditions and limitation of liability can be found at:

www.adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.pdf

If service is required, please contact Adam Hall GmbH, Daimlerstraße 9, 61267 Neu

Anspach / E-mail Info@adamhall.com / +49 (0)6081 / 9419-0

CORRECT DISPOSAL OF THIS PRODUCT

(Valid in the European Union and other European countries which mandate waste

separation). This symbol on the product or associated documents indicates that

to prevent environmental damage and personal injury through uncontrolled waste

disposal, the product must not be disposed of with normal household waste at the

end of its service life. Please dispose of this product separately from other waste and

recycle it to promote sustainable commercial activity. As a private customer, you can

obtain information on environmentally-friendly disposal options from the vendor of the

product or the appropriate regional authorities. As a commercial user, please contact

your supplier and check for any contractually agreed conditions on disposing of the

equipment. This product must not be disposed of with other commercial waste.

PLEASE NOTE

The shielding of the breakout cable is connected to the shielding of the Cat cable

via the Cat plug and Cat socket.

CE CONFORMITY

Adam Hall GmbH hereby confirms that this product meets the following

guidelines (where applicable):

Low-Voltage Directive (2014/35/EU)

EMC Directive (2014/30/EU)

RoHS (2011/65/EU)

RED (2014/53/EU)

For use in dry indoor areas.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept

any interference received, including interference that may cause undesired operation

UKCA- Conformity

Hereby, Adam Hall Ltd. declares that this product meets the following

guidelines (where applicable) Electrical Equipment (Safety) Regulations

2016 Electromagnetic Compatibility Regulations 2016 (SI 2016/1091).

The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic

Equipment Regulation 2012 (SI 2012/3032) Radio Equipment Regulations 201 7(SI 2016/2015)

Adam Hall Ltd. | The Seedbed Bus. Centre | SS3 9QY Essex | UK

UKCA- Declaration of Conformity

Products that are subject to Electrical Equipment(Safety)Regulation 2016, EMC

Regulation 2016 or RoHS Regulation can be requested at info@adamhall.com.

Products that are subject to the Radio Equipments Regulations 2017 (SI2017/1206) can

be downloaded from www.adamhall.com/compliance/

SUBJECT TO MISPRINTS AND ERRORS, AS WELL AS TECHNICAL OR OTHER

MODIFICATIONS!

Item No.: PAOCLXLRF

General

Product type: Adapters

Type: Audio over Cat adapter

No. of channels: 4

Total inputs: 4

Input type: Balanced

Input connection: RJ45

Total outputs: 4

Output type: Balanced

Output connection: XLR female

Housing material: Aluminium and steel

Cable length 0.5 m

Dimensions (W×D×H): 128 × 140 × 50 mm

Weight: 0.39 kg

Ambient temperature: - 20...70 °C

Humidity: < 80 % (non-condensing)

Audio

Max. Input level: +32 dBu (< 1 % THD, 1 kHz)

Frequency response: 0 Hz DC – 20 kHz

THD+N: < 0.0005 % (1 kHz, +4 dBu, unity, unweighted)

RJ45 pin assignment (AES72 type 5E, symmetrically wired, straight = +)

Pin 1 Ch 3 -

Pin 2 Ch 3 +

Pin 3 Ch 4 -

Pin 4 Ch 1 +

Pin 5 Ch 1 -

Pin 6 Ch 4 +

Pin 7 Ch 2 -

Pin 8 Ch 2 +

Channel colour code

Ch 1 red

Ch 2 green

Ch 3 blue

Ch 4 white

SPECIFICATIONS

Produkt Specifikationer

Mærke:	Palmer
Kategori:	Ikke kategoriseret
Model:	AoC Loom XLRf

Har du brug for hjælp?

Hvis du har brug for hjælp til Palmer AoC Loom XLRf stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Palmer Manualer

Palmer PHDA02 Manual

18 November 2025

Palmer PLI01 Manual

21 September 2025

Palmer SUPREME SOAKER Manual

11 September 2025

Palmer Tauber Manual

11 September 2025

Palmer PAN 04 Manual

11 September 2025

Palmer PLI-06 Manual

10 September 2025

Palmer RIVER inn Manual

29 August 2025

Palmer RIVER mosel Manual

28 August 2025

Palmer Monicon M G2 Manual

18 August 2025

Palmer Monicon L G2 Manual

18 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Waterstone 7800 Manual

11 December 2025

Kwikset 258 Manual

11 December 2025

Schlage F170 Manual

11 December 2025

Moen Align 7565EV Manual

11 December 2025

Energy Sistem ESG M3 Neon Manual

11 December 2025

ALNO MC10244 Manual

11 December 2025

JET TAK-ZX Manual

11 December 2025

Crosley Nashville CF1165 Manual

11 December 2025

Waterstone 1455 Manual

11 December 2025

Laica NE2015 Manual

11 December 2025