Panasonic NN-TK712SSQP Manual

Panasonic Magnetron NN-TK712SSQP

Læs gratis den danske manual til Panasonic NN-TK712SSQP (12 sider) i kategorien Magnetron. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Panasonic NN-TK712SSQP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Installation Instructions

Trim kit

24”cabinet

(596 mm)

TK712SSQP

TK712SWQP

IP4319_F0313BE90QP_27_120827.indd 1

IP4319_F0313BE90QP_27_120827.indd 1IP4319_F0313BE90QP_27_120827.indd 1 2012-8-27 13:17:13

2012-8-27 13:17:13

2012-8-27 13:17:132012-8-27 13:17:13

1. This trim kit can be installed into a cabinet.The cabinet opening must have the following internal

dimensions as shown in , . g 1ﬁp 4

A vent is required at the rear of the cabinet. It should travel the full height of the cabinet and the

cabinet should not be obstructed. Minimum dimension of vent: 45 mm x 600 mm ( ).ﬁg 1, p 4

MINIMUM INSTALLATION HEIGHT 850 MM.

2. Electrical Connections The appliance is supplied with a mains plug attached and should only

be connected into an earthed socket that has been installed according to the relevant safety

regulations.

If the plug is no longer accessible after the appliance has been built into the cabinet, a dual pole

isolator must be installed to conform to the relevant safety standards.

3. Appliance shall be provided with means for disconnection from the supply mains having a contact

separation in all poles that provide full disconnection under overvoltage

Ⅲ conditions, such means

must be incorporated in the xed wiring in accordance with the wiring rules and accessible.ﬁ

4. It is essential that the cabinet is xed to the wall for stability. The shelf must be able to support a ﬁ

weight of 30 kg.

5. If the microwave oven is to be removed from the kitchen cabinet and used free standing, the built

in parts must be removed, and the oven returned to its original condition. Keep these installation

instructions for future reference so the installation process can be reversed.

TAKE CARE NOT TO KINK OR TRAP THE MICROWAVE ELECTRICAL CABLE.

The diagram may vary from the actual unit and is only for your reference.

Contents

Attention .............................................................................................................................................P1

Step 1. Unpacking list .........................................................................................................................P2

Step 2. Feature diagram .....................................................................................................................P3

Step 3. Cabinet Preparation ...............................................................................................................P4

Step 4. Microwave Oven Installation ..................................................................................................P5

Step 5. Cabinet Installation............................................................................................................. P6-7

Step 6. Finishing Installation......................................................................................................... P8-10

IP4319_F0313BE90QP_27_120827.indd Sec1:1

IP4319_F0313BE90QP_27_120827.indd Sec1:1IP4319_F0313BE90QP_27_120827.indd Sec1:1 2012-8-27 13:17:14

2012-8-27 13:17:14

2012-8-27 13:17:142012-8-27 13:17:14