Panduit FXTHP5NLDSNM028 Manual

Panduit Kabler til computere og periferiudstyr FXTHP5NLDSNM028

Læs gratis den danske manual til Panduit FXTHP5NLDSNM028 (2 sider) i kategorien Kabler til computere og periferiudstyr. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Panduit FXTHP5NLDSNM028, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Page 1 of 2

Tak-Ty Option

Ta k-Ty

Slot features in the cable transition allows for the use of a Tak-Ty

to either secure the cable harness to a rack feature, such as

cable management fingers, or to more robustly secure multiple

cable transitions that are interlocked together.

PanMPO to LC Uniboot

Cable Harness (Hydra)

3.0mm round cable clips

3.0mm round cable

Housing ribs

(Transitions interlocked)

(Cable secured in clip)

Cable management example

Cable Clips & Housing Ribs Option

Cable Transition Usage

LC Uniboot PanMPO

Connectors Connector

Cable transition

E-mail:

techsupport@panduit.com

Phone:

866-405-6654

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

www.panduit.com

Page 2 of 2

LC Uniboot Polarity Changeover - Pair Flipping

Squeeze both sides of the LC Uniboot cover evenly and

pull back to disengage the tab on the opposite side.

Slide the LC Uniboot cover back away from connectors and

rotate 180°.

Rotate each LC connector downward 180°. Re-install the LC Uniboot cover until you hear an audible click.

PanMPO Gender Changeover

Squeeze both sides of the outer housing at the back end evenly

until you hear an audible click. Pull off connector to remove.

Locate hole in the inner housing on the slotted side and position

pin retraction tool over the hole.

Insert tool into hole, press down gently, and push backward to

retract connector pins to the female state. Repeat process in

opposite direction to extract pins for male state.

Re-install the outer housing. Ensure the key is in the proper

orientation. See PanMPO polarity changeover instructions on

page 2 of FS041* for more details.

3Female = Pins retracted

Pins

retracted

Gently

CAUTION! Only Panduit tool is to be

used for gender change. Use of any

other tool can cause fiber damage and

will void the product warranty.

Pin retraction

tool

Hole

Pins

extracted

Outer

housing

Male = Pins extracted

*Denotes instruction sheet revision letter.

Produkt Specifikationer

Mærke:	Panduit
Kategori:	Kabler til computere og periferiudstyr
Model:	FXTHP5NLDSNM028
Antal pr. pakke:	1 stk
Produktfarve:	Turkisfarve
Opbevaringstemperatur (T-T):	-40 - 65 °C
Driftstemperatur (T-T):	0 - 50 °C
Kabellængde:	28 m
Bæredygtighedscertifikater:	RoHS
Fuld duplex:	Ja
Stik 1:	12x LC
Stik 2:	MPO
Stik 1 køn:	Hanstik
Stik 2 køn:	Hunstik
Indeholder ikke:	Halogen
Kernediameter:	50 µm
Kabeltype:	OFNP
Fiberoptisk type:	OM3
Beklædning diameter:	125 µm
Fibertilstandsstruktur:	Multitilstand
Antal optiske fibre:	12