Panduit LCA4-38-L Manual

Panduit Kompressor LCA4-38-L

Læs gratis den danske manual til Panduit LCA4-38-L (4 sider) i kategorien Kompressor. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Panduit LCA4-38-L, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

COPPER COMPRESSION CONNECTORS

For Technical Support: panduit.comtechsupport@

Page 1 of 4

INSTALLATION INSTRUCTIONS T-PMPI-63-PC

Panduit Corp. 2024

Rev 1 1

1. Use a connector marked for the wire size and wire material to be used. NEVER

use a copper connector on aluminum wire.

Strip wire insulation to approximate length shown on tool chart. DO NOT nick

ring the conductor strands.

Clean the wire.

Insert stripped wire into connector until the wire stops.

Using installation tooling shown on other side, insert connector in die and crimp

between color bands or knurl markings, use these markings as a guide to evenly

space crimps on barrel of connector. Begin crimping near the tongue end of

the lug and continue crimping toward the wire end.

IMAGES BELOW DEPICT CRIMP ZONES, AND SERVE AS GENERAL GUIDELINES FORA

THE CRIMP AREA. REQUIRED NUMBER OF COMPRESSIONS SHOWN ON TOOL

CHART IN ( ) ON PAGES 2,3 & 4 BASED ON TOOL AND DIE COMBINATION USED.

After crimping, inspect for sharp edges, flash or burrs and remove if present.

COPPER COMPRESSION CONNECTOR INSTALLATION

1 2

1 2 3

1 2 3 4

# ZONESOF CRIMP : 1

# ZONESOF CRIMP : 2

# ZONESOF CRIMP : 3

# ZONESOF CRIMP : 4

Produkt Specifikationer

Mærke:	Panduit
Kategori:	Kompressor
Model:	LCA4-38-L
Produktfarve:	Metallic
Materiale:	Kobber
Bæredygtighedscertifikater:	RoHS
Stikforbindelse kontakter plettering:	Tin
Afisoleringslængde:	22.2 mm
Kabel sektion (AWG):	3