Parsun F60 FEL-T Manual
Parsun
Påhængsmotor
F60 FEL-T
Læs gratis den danske manual til Parsun F60 FEL-T (69 sider) i kategorien Påhængsmotor. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Parsun F60 FEL-T, eller vil du spørge andre brugere om produktet?
Side 1/69
OUTBOARD MOTORS
OWNER’S MANUAL
F50/60 BEL-D
F50/60 BEL-T
F50/60 FEL-T
SUZHOU PARSUN POWER MACHINE CO., LTD.
Thank you for owning an outboard motor.
Thank you for your trust in our company and products.
The outboard motors are powerful, economic and safe, manufactured with
advanced technology.
Please read this manual carefully before operating your outboard motor. A thorough
understanding of the manual will help you to know this product for proper operation,
maintenance and care. This will ensure that your outboard motor operates well under all
conditions.
We seek continuous improvement in product quality. Therefore, while this manual
contains the most current product information available at the time of printing, there may
be minor discrepancies between your machine and this manual. If there is any question
concerning the manual, please consult your local PARSUN dealer.
Data, illustrations or explanations in this Owner’s Manual do not constitute base for
any legal claim against our company.
SUZHOU PARSUN POWER MACHINE CO., LTD
Engine Identification Numbers
Outboard motor serial number
The outboard motor serial number is marked on the label. The label can be found on the bracket left
assembly or on the upper part of the bracket swivel.
Record your outboard motor serial number in the spaces provided to assist you in ordering spare parts
from your dealer or for reference in case your outboard motor is stolen.
1. Outboard motor serial number location
Serial number as follows:
SN
1
Engine serial number
The engine serial numbe uminum casting of er is carved on the al ngine.
Engine serial number as follows:
Table of contents
1. Main components and General information ....................................................................................... 1
1.1 Main components ............................................................................................................................ 1
1.2 General information ....................................... ................... 5 ...............................................................
1.2.1Specification .................................................................................................................................. 5
1.2.2 Fueling instruction ..................................... .................... 6 ...............................................................
1.2.3 Propeller selection ........................................................................................................................ 7
2. Operation ........................................................................................................................................... 8
2.1 Installation ....................................................................................................................................... 8
2.1.1 Mounting height ............................................................................................................................ 9
2.1.2 Clamping the outboard motor ..................................................................................................... 10
2.2 Breaking in engine .......................................................................................................................... 11
2.3 Pre-operation checks .................................................................................................................... 12
2.4 Filling fuel .............................................. ......................... 14 ...............................................................
2.5 Starting engine .............................................................................................................................. 14
2.6 Warm up engine ............................................................................................................................ 18
2.7 Shifting .......................................................................................................................................... 19
2.7.1 Forward ...................................................................................................................................... 20
2.7.2 Reverse ...................................................................................................................................... 21
2.8 Tiller ............................................................................................................................................... 22
2.9 Trim tab ......................................................................................................................................... 24
2.10 Stopping engine ........................................................................................................................... 24
2.11 Trimming outboard motor ............................................................................................................. 25
2.11.1 Tilting up ................................................................................................................................... 27
2.11.2 Tilting down ............................................................................................................................... 28
2.12 Cruising in other conditions ......................................................................................................... 29
2.12.1 Cruising in shallow water .......................................................................................................... 29
2.12.2 Cruising in salt water ................................................................................................................ 30
3. Maintenance .................................................................................................................................... 30
3.1 Greasing ........................................................................................................................................ 31
3.2 Cleaning and adjusting spark plug ................................................................................................ 32
3.3 Checking the fuel system .............................................................................................................. 33
3.3.1 Cleaning the fuel filter ................................................................................................................. 34
3.4 Inspecting idling speed .................................................................................................................. 35
3.5 Changing engine oil ....................................... ................. 36 ...............................................................
3.6 Checking wiring and connectors .................................................................................................... 38
3.7 Checking for leakage ..................................................................................................................... 38
3.8 Checking propeller ........................................................................................................................ 38
3.8.1 Removing the propeller .............................................................................................................. 39
3.8.2 Installing the propeller ................................................................................................................ 40
3.9 Changing gear oil .......................................................................................................................... 41
3.10 Cleaning fuel tank ........................................................................................................................ 42
3.11 Checking and replacing anode(s) ................................................................................................ 43
3.12 Checking top cowling................................................................................................................... 43
3.13 Maintenance Table ...................................................................................................................... 44
4 Transporting and storing ................................................................................................................... 46
3
Remote control lever
Moving the lever forward from the neutral position engages forward gear. Pulling the lever back from
neutral engages reverse. The engine will continue to run at idle until the lever is moved about 35º (a
detent can be felt). Moving the lever farther opens the throttle, and the engine will begin to accelerate.
1. Neutral “N”
2. Forward “F”
3. Reverse “R”
4. Shift
5. Fully closed
6. Throttle
7. Fully open
Neutral interlock trigger
To shift out of neutral, first pull the neutral interlock trigger up.
1. Neutral interlock trigger
Neutral throttle lever
To open the throttle without shifting into either forward or reverse, put the remote control lever in the
neutral position and lift the neutral throttle lever.
4
NOTE:
The neutral throttle lever will ntrol lever is in neutral. operate only when the remote co
The remote control lever will operate only when the neutral throttle lever is in the closed
position.
1. Fully open
2. Fully closed
5
1.2 General information
1.2.1Specification
Main technical data:
Items Data Items Data
Type of engine Four cylinders,4-stroke Weight (BEL-T) 115Kg
Displacement 996cm3 Weight (FEL-T) 110Kg
Bore X stroke 65mm×75mm Recommended fuel Unleaded regular gasoline
Gear ratio 1.85（24/13） Fuel tank capacity 24L
Overall length 1383mm(BEL-D/T)
713mm(FE-T) Recommended engine oil SAE10W30 or SAE10W40
Overall width 427mm Engine oil quantity 2.1L(with oil filter)
Overall height 1435mm Recommended gear oil Hypoid gear oil SAE﹟90
Transom height 508mm Gear oil quantity 430cm3
Weight (BEL-D) 113Kg Spark plug DPR7EA-9
Main performance:
Items Data Items Data
Maximum output 44.1Kw/5500rpm(60HP) Tightening
torque for
engine
Spark plug 18.0Nm
36.8Kw/5500rpm(50HP) Propeller nut 35.0Nm
Idling speed (in neutral, EFI) 800±50rpm Engine oil drain bolt 18.0Nm
Full throttle operating range 5000~6000rpm Engine oil filter 18.0Nm
Valve clearance IN(cool engine) 0.9mm 0.15~0.25mm Spark plug gap 0.8~
Valve clearance EX(cold engine) 0.25~0.35mm
6
1.2.2 Fueling instruction
Fueling instructions：
：
：
：：
Recommended gasoline:
Regular unleaded gasoline，If it is not available, then premium gasoline.
If knocking or pinging occurs, use a different brand of gasoline or premium unleaded fuel.
If leaded gasoline is usually used, engine valves and related parts should be inspected after every 100
hours of operation.
WARNING：
：
：
：：
Do not smoke when refueling, and keep away from sparks, flames, or other sources of
Ignition.
Stop engine before refueling.
Refuel in a well-ventilated area; refuel portable fuel tanks off the boat.
Do not overfill the fuel tank.
Take care not to spill gasoline, if gasoline spills, wipe it up immediately.
Tighten the filler cap securely after refueling.
If you should swallow some gasoline, inhale a lot of gasoline vapor, or get gasoline in your
eye, get immediate medical attentions.
If any gasoline spills onto your skin, immediately wash with soap and water. Change clothing
if gasoline spills on it.
Touch the fuel nozzle to metal components to prevent electrostatic sparks.
Produkt Specifikationer
| Mærke: | Parsun |
| Kategori: | Påhængsmotor |
| Model: | F60 FEL-T |
Har du brug for hjælp?
Hvis du har brug for hjælp til Parsun F60 FEL-T stil et spørgsmål nedenfor, og andre brugere vil svare dig
Påhængsmotor Parsun Manualer
7 April 2024
3 December 2023
10 August 2023
16 December 2022
Påhængsmotor Manualer
- Marna
- Tohatsu
- Talamex
- Greenworks
- Neptun
- Nanni
- Sail
- Honda
- Rhino
- Mercury
- Hidea
- Nimarine
- Haswing
- Torqeedo
- Coleman
Nyeste Påhængsmotor Manualer
7 Juni 2025
12 Januar 2025
11 Januar 2025
1 Januar 2025
1 Januar 2025
1 Januar 2025
1 Januar 2025
1 Januar 2025
1 Januar 2025
29 December 2024