Paxton Net2Air Bridge Manual

Paxton Wifi repeater Net2Air Bridge

Læs gratis den danske manual til Paxton Net2Air Bridge (4 sider) i kategorien Wifi repeater. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Paxton Net2Air Bridge, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

PAGE 1

Ins-40085-US Net2Air Ethernet bridge - UL

01/28/2013

The access control unit connects to the Net2 software running on the PC using Paxton Net2Air proprietary wireless

technology. A Net2Air bridge enables communication from the Net2 software to the Paxton wireless products.

Radio signals do not always behave as you might expect. For example, a cell phone that displays a full signal on

one part of the site will lose signal completely only a few feet away. These problems can be addressed by using the

Net2 site surveyor kit (690-200-US)

See also: XAN1095 - Net2 nano - How does it work? < http://paxton.info/974 >

X AN1096 - How to plan a Net2 nano installation < http://paxton.info/975 >

X Ins-30096-US - Net2Air site surveyor < http://paxton.info/1193 >

Net2Air wireless communication

Reader

Control unit

Net2Air Ethernet bridge

This unit is for supplemental use only, and is to be employed as a programming/downloading/monitoring tool only.

The unit will continue to operate in a 'standalone' mode if the PC is shut down. Any Events that occur during this

period are stored in the unit and the PC is updated when it comes back on line.

Part number Description

477-384-US Net2Air Ethernet bridge

Options

Paxton

Radio frequency

This product should not be installed within 10 feet of other wireless equipment operating on a 2.4Ghz frequency.

To ensure optimum performance other wireless networks should avoid WiFi channels 11, 12 and 13 to reduce the

possibility of interference.

**IMPORTANT - THIS IS A NETWORK DEVICE**

Please contact your IT Administrator before installing this product.

Technical Support

Technical help is available: Monday - Friday from 02:00 AM - 8:00 PM (EST)

1.800.672.7298 supportUS@paxton-access.com

Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/

For instructions in alternative languages - http://paxton.info/1000

PAGE 2

Enclosure

Power

Net2Air activity

TCP/IP LAN

connection

The bridge should be mounted vertically in the

supplied base to achieve the optimum range

Ethernet

Mac Address:

00-01-02-03-04

Access hole for reset button

Paxton

Access

Server Connected - The TCP/

IP interface is communicating

with the PC Net2 server

This equipment must not be co-located with any other transmitter and must be used at a distance in excess

of 20cm (7.9 inches) to the user.

The party that incorporates this equipment into another host device is responsible for verication of the

emissions produced by the nal product and must adhere to the limits specied in FCC Part 15.

Furthermore, a label must be applied to the exterior of the nal product referring to this enclosed module,

which states : "Contains FCC ID: USE477268"

Following the completed installation of this equipment, no further maintenance or testing is required.

It is advisable to ensure that any third party backup power supplies or recovery procedures are checked regularly

to ensure that the operation of the Paxton system is not compromised.

Maintenance

Fitting kits

Part number Description

fk1-088 2 off - No8 x 1in pozi round woodscrew - zinc

2 off - Wall plugs

Parts Kit

Power

Power Supply

Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the

authorities having jurisdiction.

Power over Ethernet.

This unit can be powered over the ethernet link with POE compatible hardware. Where used, any POE injector

must be UL294 listed.

The unit is powered from a supplied mains power adaptor via a plug connection.

All interconnecting devices must be UL Listed.

The use of any add-on, expansion, memory or other module manufactured or supplied by the manufacturer's

representative will invalidate the CAN/ULC-S319 certication.

For CAN/ULC-S319 installations, terminals, leads and wiring methods must comply with CSA, C22.1, Canadian

electrical code, Part 1, safety standards for electrical installations.

Produkt Specifikationer

Mærke:	Paxton
Kategori:	Wifi repeater
Model:	Net2Air Bridge
Vekselstrømsindgangsspænding:	100-240 V
Produktfarve:	Black, Grey
Produkttype:	Netværksbro
Driftstemperatur (T-T):	-20 - 55 °C
Dimensioner (BxDxH):	70 x 100 x 195 mm
Netværksstandarder:	IEEE 802.3af
Kan monteres på væggen:	Ja
Frekvensbånd:	2.4 GHz
Maksimal dataoverførselshastighed:	100 Mbit/s
Strøm over Ethernet (PoE):	Ja