PCE Instruments PCE-DPD-F2 Manual

PCE Instruments Måling PCE-DPD-F2

Læs gratis den danske manual til PCE Instruments PCE-DPD-F2 (32 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6 anmeldelser. Har du et spørgsmål om PCE Instruments PCE-DPD-F2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

PCE-DPD-F1

PCE-DPD-F2

Panel meter for load cells

Digital panel meter for load cells. Provides excitaon voltage to power up to 8 cells. Standard

96 x 48 mm size (1/8 DIN). Reading with 6 digit display. Accepts 4 and 6 wire load cells, includes ‘sense’

funcon, fast access to alarm setpoints, tare and ‘auto-tare’ funcons, ‘on power up’ funcons, stabil-

ity alarms, congurable operator menu, congurable led brightness. Universal AC and DC power. Up

to 3 oponal modules for output and control (relays, transistor, control SSR, analog outputs, Modbus

RTU communicaons, RS-485 ASCII, RS-232, ...)

www.pce-instruments.com

DIGITAL PANEL METERS

4784r03

User’s Manual

1. Panel meter PCE-DPD-F1 & F2

Panel meter for load cells, size 96 x 48 mm (1/8 DIN)

Digital panel meter, with 96 x 48 mm (1/8 DIN) size and 6

digits with 14 mm digit height, for load cell signals. Pro-

vides excitaon voltage congurable to +5 Vdc or +10 Vdc

to power up to 8 standard 350 Ohms cells. Scalable read-

ing from 999999 to -199999 with congurable decimal

point.

Tare funcon, with congurable controls, and ‘auto-tare’

funcon for automac tare correcon when weight is re-

moved from the cell. Three working modes with dierent

acquision speeds and noise rejecon to 50 and 60 Hz.

Output and control opons with 1, 2 and 3 relays, isolated

analog outputs, Modbus RTU communicaons, transistor

outputs, SSR control outputs, RS-485 ASCII and RS-232.

Independent alarms congurable as maximum or mini-

mum, with acvaon at setpoint or when reading is

stable, with 1 or 2 setpoints per alarm, hysteresis, inde-

pendent acvaon and deacvaon delays, congurable

inverted acvaon of the relay and congurable locked

alarms (see secon 1.13.8).

Front protecon IP65. Connecons by plug-in screw ter-

minals. For industrial applicaons.

Funcons included :

•

tare accessible from frontal key or rear contact

(see sec-

on 1.11)

• automac ‘auto-tare’ funcon (see secon 1.13.4)

• access to gross weight value and tare value (see sec-

on 1.9.5)

• funcon ‘On Power Up’ for automac acvaon of

funcons at start-up (see secon 1.13.14)

• scale factor for easy modicaon of reading units (see

secon 1.13.5)

• ‘stock units’ funcon to count units (see secon 1.13.6)

• access to the measured signal value (in mV), excitaon

current provided (in mA) and real excitaon voltage (see

secon 1.13.13)

• congurable ‘Fast access’ menu (key ‘UP’ ( )) with 5

access to selected funcons (see secon 1.13.13)

Mulple display lters, memory for maximum and mini-

mum, password, 5 congurable brightness levels.

1. Power and signal connecons

- connect the power (see secon 1.8)

- connect the signal (see secon 1.8)

- read recommendaons to connect the ‘sense’ (see secon

1.8.1) and for load cell ground connecons (see secon

1.8.2)

2. Inial setup (see secon 1.13.2)

- theorecal conguraon of the cell (obtain the load cell

data : sensivity, load and excitaon) and congure the

instrument

- apply the empirical conguraon of the cell (apply the

high and low ‘eld correcon’)

- assign the ‘system zero’

3. Advanced conguraon (oponal) (see secon 1.13.7)

- tare conguraon, see secons 1.11 and 1.13.4

1.1 How to use this manual

- funcon ‘stock units’ (see secon 1.13.6)

- scale factor (see secon 1.13.5)

- acquision modes (see secon 1.9.1)

4. Congure the alarms (oponal) (see secon 1.13.8)

5. Display lters (oponal) (see secon 1.13.10)

6. Congure operator controls (oponal)

- congure the rear control (see secon 1.13.11)

- congure the front key ‘LE’ (3)(see secon 1.13.12)

- congure the fast access (key ‘UP’ ( ))

5(see secon 1.13.13)

7. Congure other funcons (oponal)

- congure the ‘on power up’ funcon (see secon 1.13.14)

- congure the password and brightness level (see secon 1.13.17)

8. Congure the output and control opons: analog or serial

(see secon 1.13.18)

If this is the rst me you are conguring this instrument,

below are the steps to follow to install and congure the in -

strument. Read all the manual secons in order to have a

full and clear view of the characteriscs of the instrument.

Do not forget to read the installaon precauons

at secon

1.19

Produkt Specifikationer

Mærke:	PCE Instruments
Kategori:	Måling
Model:	PCE-DPD-F2

Har du brug for hjælp?

Hvis du har brug for hjælp til PCE Instruments PCE-DPD-F2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling PCE Instruments Manualer

PCE Instruments PCE-VM 400B Manual

9 Juni 2025

PCE Instruments PCE-WSAC 50-211 Manual

9 Juni 2025

PCE Instruments PCE-WM1 Manual

8 Juni 2025

PCE Instruments PCE-DFG N 5-ICA Manual

8 Juni 2025

PCE Instruments PCE-LXT Manual

8 Juni 2025

PCE Instruments PCE-RT 2000BT Manual

8 Juni 2025

PCE Instruments PCE-PSR 300UV Manual

7 Juni 2025

PCE Instruments PCE-DFG NF 5K-ICA Manual

7 Juni 2025

PCE Instruments PCE-DFG N 20K-ICA Manual

7 Juni 2025

PCE Instruments PCE-Oe-LED Manual

7 Juni 2025

Måling Manualer

Nyeste Måling Manualer

Ermenrich Seek VE50 Manual

14 Juni 2025

Ermenrich Seek FR40 Manual

14 Juni 2025

Ermenrich Reel PRO GE60 Manual

14 Juni 2025

Mitsubishi SRK35MMH1 Manual

14 Juni 2025

Ermenrich Zing TC20 Manual

14 Juni 2025

Ermenrich Zing TC17 Manual

14 Juni 2025

Ermenrich NetGeeks NP30 Manual

14 Juni 2025

Ermenrich Wett MW10 Manual

14 Juni 2025

Ermenrich NetGeeks NP25 Manual

14 Juni 2025

Ermenrich Zing WT40 Manual

14 Juni 2025