PCE Instruments PCE-DPD-P Manual


Læs gratis den danske manual til PCE Instruments PCE-DPD-P (26 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 11 anmeldelser. Har du et spørgsmål om PCE Instruments PCE-DPD-P, eller vil du spørge andre brugere om produktet?

Side 1/26
Impulse counter, ratemeter
Impulse counter, ratemeter and periodmeter, with 14 mm digit height. Accepts all type of impulse
sensors (NPN, PNP, Namur, TTL, inducve, mechanical, encoders, ...). Provides congurable excitaon
voltage to power-up the transducer. Standard 96 x 48 mm size (1/8 DIN). Reading with 6 digit display.
Fast access to alarm setpoints, special modes for fast counng and for slow ratemeter applicaons,
on power up’ funcon, congurable reading brightness. Universal AC and DC power. Up to 3 oponal
modules for output and control (relays, transistor, control SSR, analog outputs, Modbus RTU commu-
nicaons, RS-485 ASCII, RS-232, ...) www.pce-instruments.com
PANEL METERS
4850r15
PCE-DPD-P1
PCE-DPD-P2
User’s Manual
2
1. Panel meter PCE-DPD-P1 & PCE-DPD-P2
Counter, ratemeter and periodmeter, 96 x 48 mm (1/8 DIN)   
Panel meter 96 x 48 mm (1/8 DIN) and 6 digits with 14 mm digit
height, congurable with 5 impulse counter modes (see secon 1.2),
2 ratemeter modes and a 1 periodmeter mode (see secon 1.3) (see
secon 1.4).
Highly congurable, accepts all types of sensors (NPN, PNP, push-
pull, Namur, inducve, pick-up, mechanical, TTL, CMOS, ...) including
quadrature signals (single and bidireconal encoder signals).
Reading from 999999 to -199999 with decimal point, scalable read-
ing with congurable mulplier factor (1 to 999999) and congurable
divider factor (1 to 999999). Includes internal pull-up and pull-down
resistors, congurable trigger levels, detecon by rising or falling
edge, excitaon voltage congurable from 5 Vdc to 18 Vdc.
Opons for output and control with 1, 2 and 3 relays, transistor out-
puts, controls for SSR relays, isolated analog outputs, communica-
ons in Modbus RTU, RS-485 ASCII and RS-232.
Independent alarms congurable as maximum or minimum, with 1
or 2 setpoints per alarm, hysteresis, independent acvaon and de-
acvaon delays and control for inverted relay.
Front protecon IP65. Connecons by plug-in screw terminals. For
industrial applicaons.
Fast access’ menu to selected funcons, accessible with key UP ( ) 5
(see secon 1.19.12)
Funcon for system protecon on rst ‘coldstart-On power up
up or automac reset (see secon 1.19.15)
Special ’ mode for fast counng applicaons FAST (see secon 1.16)
Special mode for slow ratemeter applicaons (low frequenSLOW -
cy applicaons) (see secon 1.15)
Direct conguraon for most usual sensor, at the SnSr / Auto
menu (see secon 1.19.10)
Funcon Trigger Sense helps to detect the correct trigger level
(see secon 1.13)
Mulple display lters, memory for maximum and minimum reading,
password protecon, 5 brightness levels.
Index
1.
Panel meter PCE-DPD-P1 & PCE-DPD-P2. . . . . . . . . . . . . . . . . . . . 2
1.1 How to order . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Impulse counter modes . . . . . . . . . . . . . . . . . . 3
1.3 Ratemeter modes 3. . . . . . . . . . . . . . . . . . . . . .
1.4 Periodmeter mode 3 . . . . . . . . . . . . . . . . . . . . .
1.5 Funcons included 3 . . . . . . . . . . . . . . . . . . . . .
1.6 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.7 Power connecons . . . . . . . . . . . . . . . . . . . . . 4
1.8 Sensor conguraon and connecons . . . . . . . . . . 4
1.9 Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.10 Signal connecons . . . . . . . . . . . . . . . . . . . . 4
1.11 Technical specicaons . . . . . . . . . . . . . . . . . . 5
1.12 Mechanical dimensions (mm) . . . . . . . . . . . . . . 5
1.13 Funcon ‘Trigger Sense’ . . . . . . . . . . . . . . . . . 6
1.14 Funcon ‘cycle counter . . . . . . . . . . . . . . . . . 6
1.15 ‘SLOW’ mode . . . . . . . . . . . . . . . . . . . . . . . 6
1.16 ‘FAST’ mode . . . . . . . . . . . . . . . . . . . . . . . . 6
1.17 How to operate the menus . . . . . . . . . . . . . . . . 7
1.18 Messages and errors . . . . . . . . . . . . . . . . . . . 7
1.19 Conguraon menu. . . . . . . . . . . . . . . . . . . . 8
1.19.1 Inial set-up . . . . . . . . . . . . . . . . . . . . . . 8
1.19.2 Conguraon for ‘cn.1’ . . . . . . . . . . . . . . . . 8
1.19.3 Conguraon for ‘cnq.2’ . . . . . . . . . . . . . . . 9
1.19.4 Conguraon for ‘cnI.3’ . . . . . . . . . . . . . . . . 9
1.19.5 Conguraon for ‘cnc.4’ . . . . . . . . . . . . . . . 9
1.19.6 Conguraon for ‘cnd.5’ . . . . . . . . . . . . . . . 10
1.19.7 Conguraon for ‘rt.6’ . . . . . . . . . . . . . . . .10
1.19.8 Conguraon for ‘rtq.7’. . . . . . . . . . . . . . . . 10
1.19.9 Conguraon for ‘Prd.8’ . . . . . . . . . . . . . . . 11
1.19.10 Sensor conguraon. . . . . . . . . . . . . . . . . 11
1.19.11 Alarms . . . . . . . . . . . . . . . . . . . . . . . . 13
1.19.12 Fast access . . . . . . . . . . . . . . . . . . . . . . 14
1.19.13 Super fast access . . . . . . . . . . . . . . . . . . . 14
1.19.15 Menu ‘On Power Up’ . . . . . . . . . . . . . . . . 14
1.19.14 Menu ‘Key LE’ . . . . . . . . . . . . . . . . . . . . 14
1.19.16 Menus ‘Overrange / underrange’. . . . . . . . . . 15
1.19.17 Le zeros . . . . . . . . . . . . . . . . . . . . . . . 15
1.19.18 Vexc. control . . . . . . . . . . . . . . . . . . . . . 15
1.19.19 Funcon ‘Password’ . . . . . . . . . . . . . . . . . 15
1.19.20 Factory reset . . . . . . . . . . . . . . . . . . . . . 15
1.19.21 Firmware version. . . . . . . . . . . . . . . . . . .15
1.19.22 Brightness . . . . . . . . . . . . . . . . . . . . . . 15
1.19.23 Access to oponal modules . . . . . . . . . . . . .15
1.20 Full conguraon menu . . . . . . . . . . . . . . . . . 16
1.21 Factory conguraon . . . . . . . . . . . . . . . . . . . 19
1.22 To access the instrument . . . . . . . . . . . . . . . . . 20
1.23 Modular system . . . . . . . . . . . . . . . . . . . . . . 20
1.24 Precauons on installaon . . . . . . . . . . . . . . . . 21
1.25 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1.26 CE declaraon of conformity . . . . . . . . . . . . . . . 21
2. Output and control modules . . . . . . . . . . . . . . . . . 22
2.1 Module PCE-DPD/ALr1 . . . . . . . . . . . . . . . . . . .22
2.2 Module PCE-DPD/T. . . . . . . . . . . . . . . . . . . . . 22
2.3 Module PCE-DPD/SSR . . . . . . . . . . . . . . . . . . . 23
2.4 Module PCE-DPD/AO 23. . . . . . . . . . . . . . . . . . . .
2.6 Module PCE-DPD/RTU . . . . . . . . . . . . . . . . . . . 24
2.5 Module PCE-DPD/AScI4 . . . . . . . . . . . . . . . . . . 24
2.7 Module PCE-DPD/AScI2 . . . . . . . . . . . . . . . . . . 25


Produkt Specifikationer

Mærke: PCE Instruments
Kategori: Måling
Model: PCE-DPD-P

Har du brug for hjælp?

Hvis du har brug for hjælp til PCE Instruments PCE-DPD-P stil et spørgsmål nedenfor, og andre brugere vil svare dig