PCE Instruments PCE-DPD-U Manual
PCE Instruments
Måling
PCE-DPD-U
Læs gratis den danske manual til PCE Instruments PCE-DPD-U (28 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 18 anmeldelser. Har du et spørgsmål om PCE Instruments PCE-DPD-U, eller vil du spørge andre brugere om produktet?
Side 1/28

PCE-DPD-U
Mulsignal panel meter
Mulsignal digital panel meter, congurable to work as AC and DC voltmeter (up to 600 Vac / dc), AC and DC
ammeter (up to 5 Aac / dc), accepts process signals (mA, Vdc), thermocouples, resisve temperature probes
(Pt, Ni, PTC and NTC), resistances, potenometers and frequency. Congurable. Standard 96 x 48 mm size
(1/8 DIN). Scalable reading with 4 digits (9999 / -1999). ‘Fast access’ funcon to alarm setpoints, ‘external
control’ to acvate predened funcons, ‘Eco’ mode for low consumpon, selectable dual scaling, 5 levels
of congurable brightness. Single universal power supply 18 to 265 Vac/dc. Oponal modules for output
and control (relays, analog output, Modbus RTU).
User’s Manual
PANEL METERS
4822r06
www.pce-instruments.com

2
1. Panel meter PCE-DPD-U
Mulsignal 96 x 48 mm panel meter
Mulsignal digital panel meter in 96 x 48 mm size (1/8 DIN). Accepts
AC and DC voltage signals from mV up to 600 V and currents up to
5 A (AC measures in True RMS), process signals (mA and Vdc) with
excitaon voltage included, thermocouples K, J, E, N, L, R, S, B, T and
C, resisve temperature probes (Pt100, Pt500, Pt1000, Ni100, Ni200,
Ni1000, PTC and NTC), resistances, potenometers and frequency.
Scalable reading with 4 digits up to 9999 / -1999 with congurable
decimal point. Two independent alarms, congurable as maximum
or minimum, with hysteresis and setpoint.
Oponal 1 or 2 relay outputs, 4/20 mA isolated analog output, and
Modbus RTU isolated serial communicaons.
Front protecon IP50, with oponal IP65. Connecons with plug-in
screw terminals.
Index
1. Panel meter PCE-DPD-U . . . . . . . . . . . . . . . . . . . . 2
1.1 How to order . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.4 Power connecons . . . . . . . . . . . . . . . . . . . . . 3
1.5 Signal connecons . . . . . . . . . . . . . . . . . . . . . 3
1.6 Mechanical dimensions (mm) . . . . . . . . . . . . . . . 3
1.7 Installaon and start-up . . . . . . . . . . . . . . . . . . 3
1.8 Technical specicaons . . . . . . . . . . . . . . . . . . 4
1.9 Internal jumpers . . . . . . . . . . . . . . . . . . . . . . 5
1.10 Measuring AC voltages and AC currents. . . . . . . . . 6
1.11 Measuring DC voltages and DC currents . . . . . . . . 7
1.12 Measuring thermocouples . . . . . . . . . . . . . . . . 8
1.13 Measuring with Pt and Ni probes . . . . . . . . . . . . 9
1.14 Measuring with NTC probes . . . . . . . . . . . . . . .10
1.15 Measuring with PTC probes . . . . . . . . . . . . . . . 10
1.16 Process measures . . . . . . . . . . . . . . . . . . . . .11
1.17 Measuring frequency . . . . . . . . . . . . . . . . . . .11
1.18 Measuring resistances . . . . . . . . . . . . . . . . . . 12
1.19 Measuring potenometers. . . . . . . . . . . . . . . .12
1.20 ‘Fast access’ menu . . . . . . . . . . . . . . . . . . . . 13
1.21 Scaling . . . . . . . . . . . . . . . . . . . . . . . . . . .13
1.22 Oset reading . . . . . . . . . . . . . . . . . . . . . . . 13
1.23 ‘Eco’ mode. . . . . . . . . . . . . . . . . . . . . . . . . 13
1.24 External control . . . . . . . . . . . . . . . . . . . . . . 13
1.25 Second scaling. . . . . . . . . . . . . . . . . . . . . . . 13
1.26 To open the instrument. . . . . . . . . . . . . . . . . . 14
1.27 How to operate the menus. . . . . . . . . . . . . . . .15
1.28 Messages and errors . . . . . . . . . . . . . . . . . . .15
1.29 Conguraon menu. . . . . . . . . . . . . . . . . . . .16
1.29.1 Input signal ranges . . . . . . . . . . . . . . . . . . 16
1.29.2 Scaling . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.29.3 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.29.4 Fast access . . . . . . . . . . . . . . . . . . . . . . . 18
1.29.5 Super fast access . . . . . . . . . . . . . . . . . . . 18
1.29.6 External control . . . . . . . . . . . . . . . . . . . .18
1.29.7 Menu ‘Tools’ . . . . . . . . . . . . . . . . . . . . . . 19
1.29.8 Conguring the opons. . . . . . . . . . . . . . . . 21
1.30 Full conguraon menu . . . . . . . . . . . . . . . . . 22
1.31 Precauons on installaon . . . . . . . . . . . . . . . .25
1.32 Factory conguraon . . . . . . . . . . . . . . . . . . .25
1.33 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1.34 CE declaraon of conformity . . . . . . . . . . . . . . . 25
2. Output and control modules . . . . . . . . . . . . . . . . . 26
2.1 Modules PCE-DPD-U/R1 and PCE-DPD-U/R2 (relay output) . 26
2.2 Module PCE-DPD-U/A1 (analog output) . . . . . . . . . 26
2.3 Module PCE-DPD-U/MB1 (Modbus RTU) . . . . . . . . . 27
Instrument designed for industrial use, highly exible, allows for in-
tegraon in mulple applicaons, reduced cost, excellent quality and
oponal customizaon available.
• ‘Fast access’ menu at front key UP ( ) congurable for fast access 5
to alarm setpoints (see secon 1.20).
• ‘ ’ mode reduces power consumpon Eco
(see secon 1.23).
• Simplied scaling conguraon .(see secon 1.21)
• Funcon ‘ ’ to acvate with a contact a predened external control
funcon (second scaling, decimal point, reading ‘hold’, ‘tare’, memo-
ry of maximum or minimum) .(see secon 1.24)
• 5 congurable brightness levels .(see secon 1.29.7)
1.1 How to order
PCE-DPD
Model Opon 1
U - -
-R1 (1 relay)
-A1 (analog output)
-MB1 (Modbus RTU)
-(empty)
-U
(Power supply
18...265 Vac/dc)
-
Opon 2
-R2 (1 relay)
-(empty)
Produkt Specifikationer
Mærke: | PCE Instruments |
Kategori: | Måling |
Model: | PCE-DPD-U |
Har du brug for hjælp?
Hvis du har brug for hjælp til PCE Instruments PCE-DPD-U stil et spørgsmål nedenfor, og andre brugere vil svare dig
Måling PCE Instruments Manualer
9 Juni 2025
9 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
Måling Manualer
- Pico
- Stabila
- Amprobe
- Joy-It
- Ridgid
- Hager
- TDE Instruments
- Crowcon
- Mueller
- Workzone
- SilverCrest
- Smartwares
- Panasonic
- Testo
- ADE
Nyeste Måling Manualer
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025