PCE Instruments PCE-IR 50 Manual


Læs gratis den danske manual til PCE Instruments PCE-IR 50 (32 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om PCE Instruments PCE-IR 50, eller vil du spørge andre brugere om produktet?

Side 1/32
Guide de l’opérateur PCE-IR 50
PCE-IR 50 Bedienungsanleitung
PCE-IR 50 Guía del operario
PCE-IR 50 Manuale di istruzione
Operator’s uide G
Termómetro digital
PCE-IR 50
PCE Instruments Chile SA
RUT 76.423.459-6
Calle Santos Dumont 738, Local 4
Comuna de Recoleta Santiago de Chile
Chile
Telf. +56 2 24053238
Telf. 405 3096 +56 2 2
info@pce-instruments.clcl
www.pce-instruments.com/chile
PCE Ibérica S.L.
C/ Mayor, 53 Bajo
02500 Tobarra
Albacete
España
Tel . f +34 967 543 548
Fax: +34 967 543 54 2
info@pce-iberica.es
www.pce-instruments.com/espanol
2
PCE-IR 50 non-contact infrared sensors measure temperatures from -20°C to 500°C and
provide either a linear 4 to 20 mA output, a voltage output or a thermocouple output.
This range of output signals is compatible with almost any indicator, controller, recorder,
data logger etc., without the need for special interfacing or signal conditioning. They are
suitable for most materials such as food, paper, textiles, plastics, leather, tobacco,
pharmaceuticals, chemicals, rubber, coal and asphalt; but not materials with a low
emissivity, for example polished metals. Two-wire and four-wire versions are available:
Two-wire sensors the target a 4-20 PCE-IR 50 transmit temperature as mA output and offer a
simple solution for most applications.
Four-wire sensors transmit the target temperature as a 0-50 mV or thermocouple PCE-IR 50
output (type J or K) plus the internal sensor temperature as a 4-20 mA output. This second
output can be used to ensure that the sensor is being operated within the correct ambient
temperature limits and prevent damage caused by overheating or overcooling. It can also be
used to give an approximate indication of the air temperature surrounding the sensor.
SPECIFICATION
MODEL NUMBERS (X = Output: see Output Table)
Field of View -20ºC to 100ºC 0ºC to 250ºC 0ºC to 500ºC
2:1 PC21LT-X PC21MT-X PC21HT-X
15:1 PC151LT-X PC151MT-X PC151HT-X
30:1 PC301LT-X PC301MT-X PC301HT-X
ø5mm @ 100mm PCCFLT-X PCCFMT-X PCCFHT-X
Output Table
Model (-X) Target Temperature Output Sensor Temperature Output
-0 4-20 mA (two wire, loop powered) None
-1 0-50 mV 4-20 mA
-3 Type J thermocouple 4-20 mA
-4 Type K thermocouple 4-20 mA
EXAMPLE MODEL NUMBER:
PC151MT-0: PCE-IR 50 infrared temperature sensor with optics, temperature range 15:1
0°C to 250°C, mA outputtwo-wire 4-20
GENERAL SPECIFICATIONS
Accuracy ±1% of reading or ±1°C whichever is greater
Repeatability ±0.5% of reading or ±0.5°C whichever is greater
Emissivity 0.95 (fixed)
Response Time 240 ms (90% response)
Spectral Response 8 to 14 µm
Supply Voltage 24 V DC (28 V DC max.)
Sensor Voltage 6 V DC min.
Maximum Loop Impedance 900 ohms (4-20 mA output)
Output Impedance 56 ohms (voltage/thermocouple output)
MECHANICAL SPECIFICATIONS
Construction Stainless Steel
Dimensions 18 mm diameter x 103 mm
Cable Length 1 m as standard (up to 30 m available on request)
Weight with 1 m Cable 95 g
ENVIRONMENTAL SPECIFICATIONS
Environmental Rating IP65
Ambient Temperature Range 0°C to 70°C
Relative Humidity 95% maximum non-condensing
english


Produkt Specifikationer

Mærke: PCE Instruments
Kategori: Måling
Model: PCE-IR 50

Har du brug for hjælp?

Hvis du har brug for hjælp til PCE Instruments PCE-IR 50 stil et spørgsmål nedenfor, og andre brugere vil svare dig