PCE Instruments PCE-IT55 Manual


Læs gratis den danske manual til PCE Instruments PCE-IT55 (7 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om PCE Instruments PCE-IT55, eller vil du spørge andre brugere om produktet?

Side 1/7
1 2
DIGITAL INSULATION TESTER
INSTRUCTION MANUAL
SAFETY INFORMATION
Read the following safety information carefully before
attempting to operate or service the meter.
To avoid damages to the instrument do not apply the
signals which exceed the maximum limits shown in the
technical specifications tables.
Do not use the meter or test leads if they look damaged.
Use extreme caution when working around bare
conductors or bus bars.
Accidental contact with the conductor could result in
electric shock.
Use the meter only as specified in this manual;
otherwise, the protection provided by the meter may be
impaired.
Read the operating instructions before use and follow
all safety Information.
Caution when working with voltages above 60V DC or
30V AC RMS. Such voltages pose a shock hazard.
Before taking resistance measurements or testing
acoustic continuity, disconnect circuit from main power
supply and all loads from the circuit.


Produkt Specifikationer

Mærke: PCE Instruments
Kategori: Måling
Model: PCE-IT55

Har du brug for hjælp?

Hvis du har brug for hjælp til PCE Instruments PCE-IT55 stil et spørgsmål nedenfor, og andre brugere vil svare dig