PCE Instruments PCE-USM Manual

PCE Instruments Måling PCE-USM

Læs gratis den danske manual til PCE Instruments PCE-USM (6 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 11 anmeldelser. Har du et spørgsmål om PCE Instruments PCE-USM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

PCE-USM RS-232 - USB Logger

The logger enables the user to save the transmission data of the RS-232 interface to one or more

folders in txt format, along with the me and date. The logger can receive and retrieve data. This

means that with the right conguraon (consider pin assignment of the RS-232), the PCE-USM

adaptor can be connected with any RS- 2 interface to record the data. 23

With the scales PCE-LSM / PCE-LS / PCE-AB / PCE-ABZ / PCE-PM / PCE-TP / PCE-BDM / PCE-BT / PCE-

TB and PCE-SD Series, the PCE-USM can be plugged directly onto the RS-232 interface.

In case it is not possible to plug the adaptor directly onto the RS-232 interface, you have the

possibility to use an extension cable The standard edion comes with an external power supply. .

(12V / 100 mA mains adaptor in + / out -)

1. Connect the PCE-USM adaptor with the RS-232 interface. Then provide power supply and watch

the diodes at the PCE-USM storage adaptor. Both diodes will light up briey and the diode at the side

of the RS-232 interface should be lit now. If it does not, this normally means that the PCE-USM is not

connected to the power supply. Check the power supply If the diode at the side of the RS-232 .

interface ashes, a data transfer to the PCE-USM storage adaptor takes place.

2. Now insert the USB pen drive into the PCE-USM USB storage adaptor and watch the diodes. The

diode at the side of the RS-232 interface will ash briey and then light up permanently. During the

me the diode was ashing, a conguraon le was saved to the pen drive (see below).If the diode

at the side of the USB interface did not light up, this can mean that the USB pen drive was not

recognised or that it is full. Check the USB pen drive’s formang and, if necessary, try using another

pen drive. FAT12 / FAT16 and FAT32 formatng is possible Now try to transmit a few data to the .

PCE-USM adaptor via the RS-232 interface and watch the diodes of the PCE-USM adaptor. If the data

transmission was successful, the diode at the side of the RS-232 interface should ash rst, followed

by the diode at the side of the RS-232 interface. This ashing indicates: date received and transferred

to USB.

Produkt Specifikationer

Mærke:	PCE Instruments
Kategori:	Måling
Model:	PCE-USM

Har du brug for hjælp?

Hvis du har brug for hjælp til PCE Instruments PCE-USM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling PCE Instruments Manualer

PCE Instruments PCE-VM 400B Manual

9 Juni 2025

PCE Instruments PCE-WSAC 50-211 Manual

9 Juni 2025

PCE Instruments PCE-WM1 Manual

8 Juni 2025

PCE Instruments PCE-DFG N 5-ICA Manual

8 Juni 2025

PCE Instruments PCE-LXT Manual

8 Juni 2025

PCE Instruments PCE-RT 2000BT Manual

8 Juni 2025

PCE Instruments PCE-PSR 300UV Manual

7 Juni 2025

PCE Instruments PCE-DFG NF 5K-ICA Manual

7 Juni 2025

PCE Instruments PCE-DFG N 20K-ICA Manual

7 Juni 2025

PCE Instruments PCE-Oe-LED Manual

7 Juni 2025

Måling Manualer

Nyeste Måling Manualer

Ermenrich Seek VE50 Manual

14 Juni 2025

Ermenrich Seek FR40 Manual

14 Juni 2025

Ermenrich Reel PRO GE60 Manual

14 Juni 2025

Mitsubishi SRK35MMH1 Manual

14 Juni 2025

Ermenrich Zing TC20 Manual

14 Juni 2025

Ermenrich Zing TC17 Manual

14 Juni 2025

Ermenrich NetGeeks NP30 Manual

14 Juni 2025

Ermenrich Wett MW10 Manual

14 Juni 2025

Ermenrich NetGeeks NP25 Manual

14 Juni 2025

Ermenrich Zing WT40 Manual

14 Juni 2025