PCE Instruments PCE-WS CR Manual


Læs gratis den danske manual til PCE Instruments PCE-WS CR (4 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 23 anmeldelser. Har du et spørgsmål om PCE Instruments PCE-WS CR, eller vil du spørge andre brugere om produktet?

Side 1/4
APPLICATIONS
PCE-WS CR has been designed to be used in industrial applications: cranes, solar panels, wind turbines, weather stations,
greenhouses, irrigation systems...
The wind sensor must be xed on a vertical position.
PCE-WS CR
OPERATING
Rotating switch
CONECTION
+
Black: Common
Brown: Power supply
Blue: Neutral
Yellow: NA*Output
Up to 180 km/h of wind speed.
Output activation:
After a second*2 of wind speed over the set value.
Output deactivation:
Wind speed 1km/h*3 below the set value.
Minimum duration of the output pulse:
5 seconds.
The output is not latched.*
4
*1 NO output by default. For a NC output, contact.
*2 Output activation temporary hysteresis is factory congured. For other
values, contact. (Rango: 0-2047 segundos)
*3 Output deactivation hysteresis is factory congured. For other values,
contact. (Range: 1-5 km/h)
*4 No alarm latching by default. For alarm latching, contact. (Latching time,
range: 0-254 minutes)
Relay Output Conguration. Speed threshold.
0 — 20km/h
1 — 25km/h
2 — 30km/h
3 — 35km/h
4 — 40km/h
5 — 45km/h
6 — 50km/h
7 — 55km/h
8 — 60km/h
9 — 65km/h
A — 70km/h
B — 75km/h
C — 80km/h
D — 85km/h
E — 90km/h
F — 95km/h
To congure the speed threshold for the relay activation, unscrew the lid in the
anemometer base to access the rotating switch.


Produkt Specifikationer

Mærke: PCE Instruments
Kategori: Måling
Model: PCE-WS CR

Har du brug for hjælp?

Hvis du har brug for hjælp til PCE Instruments PCE-WS CR stil et spørgsmål nedenfor, og andre brugere vil svare dig