PCE-WV SERIES
APPLICATIONS
PCE-WV series has been designed to be used in industrial
applications. Connected to devices such as dataloggers, PLCs,
analogue signal displays (see our reference PCE-DPD-U), it
measures the wind direction and/or activates predened alarm
values.
Application examples:
Irrigation control system, automation in greenhouses, solar
trackers, ropeways at ski resorts, cranes, wind turbines,
weather stations etc. All those applications that contribute to a
greater control and greater security. Besides, PCE-WV AH has
been designed for those applications that involve working with
sub-zero temperatures.
DIMENSIONS
OPERATING
Survival speed: 200 km/h of wind speed
It gives a RS485 MODBUS signal or 4-20 mA analogue output
which depends on the wind speed. (see graphic)
The vane must be orientated north as shown in the orientation
section.
RS485 version gives the wind direction in degrees. It calculates
the average position in the last second. In static position it has
20 positions of 18º each one.
The heater works from -20ºC up to +6ºC. Above this
temperature, it switches itself o automatically to reduce the
consumption.
The wind vane must be xed on a vertical position.
PCE-WV M12 UNDERSIDE
PCE-WV CABLE
To orientate the vane north, the vane edge must be orientated north as shown
in the picture.
Once the vane has been orientated north, the output signal will correspond to
the angles and directions in the table.
ORIENTATION VANE
92 42 46,065
185
Ø6,75
50
Ø5,2
Ø134,97
Ø18
13