Pelco Sarix Enhanced IBE322-1I Manual
Pelco
Overvågningskamera
Sarix Enhanced IBE322-1I
Læs nedenfor 📖 manual på dansk for Pelco Sarix Enhanced IBE322-1I (28 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 10 personer og blev bedømt med 3.8 stjerner i gennemsnit af 5.5 brugere
Side 1/28
1
Next Gen Sarix®
Enhanced
IBE Series
Bullet Cameras
Installation Manual
C1334 7/17M
2
Contents
Important Notices ................................................................................................................................ 3
Regulatory Notices ...................................................................................................................... 3
Radio and Television Interference ............................................................................................ 3
Korean Class A EMC .................................................................................................................. 3
Warranty Statement .................................................................................................................... 3
UL Safety Notices ........................................................................................................................ 4
Introduction ........................................................................................................................................... 5
Models ........................................................................................................................................... 6
Recommended Mounts .............................................................................................................. 6
Getting Started ..................................................................................................................................... 7
Bullet Camera Models ................................................................................................................ 8
Supplied Parts List .............................................................................................................. 8
User-Supplied Parts List ....................................................................................................8
Product Label ....................................................................................................................... 8
Product Overview ................................................................................................................................ 9
Installation ..........................................................................................................................................10
MicroSD Card Slot / Default Button ........................................................................................ 10
All- -One CableIn ........................................................................................................................ 12
Camera Cabling ......................................................................................................................... 13
Mounting the Camera ............................................................................................................... 14
Surface Mount: Ceiling or Wall ................................................................................................ 15
Installation Guide ............................................................................................................... 15
Wall Mount: Installation with Indoor (IBEWLMT-I) and Environmental (IBEWLMT-E)
Wall Mount .................................................................................................................................. 17
Supplied Parts List ............................................................................................................ 17
User-Supplied Parts List ..................................................................................................17
Installation Guide ............................................................................................................... 18
Pole Mount: Installation with Environmental (IBEPLMT-E) Pole Mount ........................... 21
Supplied Parts List ............................................................................................................ 21
User-Supplied Parts List ..................................................................................................21
Installation Guide ............................................................................................................... 21
Cable Terminations ...........................................................................................................................26
Ethernet Wiring Requirement for PoE .................................................................................... 26
IP Address Settings ........................................................................................................................... 27
Logging On to the Camera ..............................................................................................................27
Pelco Troubleshooting Contact Information .................................................................................. 27
3
Important Notices
For more information about Pelco’s product-specific important notices and thereto related information,
refer to www.pelco.com/legal.
Regulatory Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Radio and Television Interference
This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Changes and modifications not expressly approved by the manufacturer or registrant of this equipment
can void your authority to operate this equipment under Federal Communications Commission’s rules.
CAN ICES-3(A)/NMB-3(A).
Korean Class A EMC
Warranty Statement
For information about Pelco’s product warranty and thereto related information, refer to www.pelco.com/
warranty.
Installation in Environmental Air Space, 4.7.3.1
The following statement or equivalent shall be marked on the product or provided in the Installation
Instructions: “Suitable for use in environmental air space in accordance with Section 300-22(C) of the
National Electrical Code, and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code,
Part 1, CSA C22.1.”
4
UL Safety Notices
This product is intended to be supplied by a Listed Power Unit marked “L.P.S.” (or “Limited Power
Source”) and rate output 24Vac, 50/60Hz, 1.28 minimum or 48 Vdc, 0.35A minimum.
The product shall be installed by a qualified service person and the installation shall conform to local
codes.
Replaceable Batteries
CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries
According to the Instructions.
5
Introduction
The Next Gen Sarix® IBE Series IP cameras feature SureVision 3.0 technology that seamlessly deliver
advanced low-light performance with Pelco’ Wide Dynamic Range (WDR) and anti-bloom technologies s
that operate simultaneously. They are part of Pelco’s Enhanced (E) range of cameras, providing
industry-leading image quality and performance.
The Next Gen IBE Series Bullet Camera is easy to install, offers flexible mounting options, and uses a
standard Web browser for easy remote setup and administration.
The Next Gen IBE Series Bullet Camera easily connects to Pelco IP and hybrid systems such as
VideoXpert™, Endura® version 2.0 (or later), and Digital Sentry® version 7.3 (or later). The camera is
also conformant with ONVIF Profile S Profile G, and Profile Q for connection with third-party software. ,
Pelco offers an Application Programming Interface (API) and Software Develop ’s Kit (SDK) for er
interfacing with Pelco’s IP cameras.
This document describes the installation and initial setup procedures to begin operating the camera. For
more information about operating your camera, refer to the operation manual specific to the product.
NOTE: For additional information about product documentation in English and other languages, go to
www.pelco.com/sarix and navigate to the Next Gen IBE Series Bullet Camera w site.eb
6
Models
IBE129- Indoor, 3 ~ 9 mm focal range, with IR illumination, 1MPx, white1I
IBE1 -1R Environmental, 3 ~ 9 mm focal range, with IR illumination 1MPx, light gray29 ,
IBE2 - Indoor, 3 ~ 9 mm focal range, with IR illumination 2MPx, white29 1I ,
IBE2 -1R Environmental, 3 ~ 9 mm focal range, with IR illumination 2MPx, light gray29 ,
IBE222-1I Indoor , 9 mm focal range, with IR illumination, 2MPx, white~ 22
IBE222-1R Environmental, 9 mm focal range, with IR illumination 2MPx, light gray ~ 22 ,
IBE3 -1I Indoor, 3 ~ 9 mm focal range, with IR illumination 3MPx, light gray, white29 ,
IBE3 - Environmental, 3 ~ 9 mm focal range, with IR illumination 3MPx, light gray29 1R ,
IBE322-1I Indoor , 9 mm focal range, with IR illumination, 3MPx, white~ 22
IBE322- Environmental, 9 mm focal range, with IR illumination, 3MPx, light gray1R ~ 22
Recommended Mounts
IBEPLMT-E Pole mount environmental light gray , ,
IBEWLMT-E Wall mount environmental, light gray ,
IBEWLMT-I Wall mount, indoor, white
8
Bullet Camera Models
Supplied Parts List
Qty Description
1 Bullet camera
1 Wall mount junction box (optional)
1 Power adapter plug (optional)
1 I/O adapter plug (optional)
3 x 25 mm self-tapping screws M4
3 Plastic screw anchors
1 Torx T20 security bit
Next Gen IB Series Bullet Camera Installation Manual1 E
Important Safety Instructions sheet1
1 Resources sheet
User-Supplied Parts List
In addition to the standard tools and cables required for a video security installation, you will need to
provide the following items:
Qty Description
1 Cat 5 (or higher) cable with RJ-45 connector; ensure that the cable is terminated for your
application (PoE or non-PoE)
1 #2 Philips and flathead screwdriver
1 Power cable (This is necessary if PoE is not available.)
1 microSD card, up to 128 GB SanDisk Extreme® PLUS SDHC™ UHS- icroSD cardI m
1 Driver for included security bit (1/4” hex drive)
1 Alarm cable (optional)
1 Audio cable (optional)
1 Tool for drilling
Product Label
The product label lists the model number, date code, serial number, and Media Access Control
(MAC) address. This information might be required for setup. A product label is located on the
bottom of the camera and on the side the product box.
9
Product Overview
Next Gen IBE Series Bullet Camera
(1) Mounting Base: Use the mounting base to surface mount the camera or mount with one of the
optional mounting accessories (pole mount or wall mount).
(2) Set Screws: One of two set screws to secure after aiming the camera.
(3) SD Card Access: Onboard micro SD card storage up to 128 GB.
(4) Infrared and Camera Status LEDs: The Next Gen IBE Series Bullet Camera includes adaptive IR
illumination up to 30 meters. There are LED lights in a circle along the outer edge of the camera.
The Next Gen IBE Series Bullet Camera also includes a Camera Status LED which appears red at
power on, changes to flashing green through boot up, and then it turns off when the camera is in
normal operation.
(5) Camera Lens: Built-in, varifocal, 3-9 mm or 9-22 mm lens.
(6) Sun Shield: Plastic sun shield shades light while helping with heat control.
(7) Screws: Two screws to fix the sun shield after adjustment.
13
Camera Cabling
Before connecting cables, make sure that all cables and the power adaptor are placed in dry and well-
waterproofed environments (e.g. waterproof boxes).
Power Connection:
Connect a DC 12V / AC 24V adapter to the 2-pin terminal block of the All-In-One cable and the power outlet.
Or, connect the Ethernet cable to the Ethernet connector of the All-In-One cable, and plug the other end of the
cable to a Po supply. It is not recommended to use dual power.in E
Ethernet Cable Connection:
Connect one end of the Ethernet cable to the Ethernet connector of the All-In-One cable, and plug the other
end of the cable to the network switch or PC.
NOTE: When connecting the camera directly to a PC, you may need to use an Ethernet crossover cable.
NOTE: Check the status of the link indicator and the activity indicator LEDs. If the LEDs are unlit, please
check the LAN connection. A green link light indicates a good network connection. An orange activity light
flashes to indicate network activity.
Produkt Specifikationer
| Mærke: | Pelco |
| Kategori: | Overvågningskamera |
| Model: | Sarix Enhanced IBE322-1I |
Har du brug for hjælp?
Hvis du har brug for hjælp til Pelco Sarix Enhanced IBE322-1I stil et spørgsmål nedenfor, og andre brugere vil svare dig
Overvågningskamera Pelco Manualer
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
20 August 2024
20 August 2024
Overvågningskamera Manualer
- Overvågningskamera Gigaset
- Overvågningskamera Accsoon
- Overvågningskamera Alula
- Overvågningskamera Whistler
- Overvågningskamera EFB Elektronik
- Overvågningskamera Nivian
- Overvågningskamera Turing
- Overvågningskamera Security Labs
- Overvågningskamera Vitek
- Overvågningskamera Securetech
- Overvågningskamera Aqara
- Overvågningskamera V-TAC
- Overvågningskamera Luis Energy
- Overvågningskamera Nedis
- Overvågningskamera Philips
Nyeste Overvågningskamera Manualer
4 Juni 2025
4 Juni 2025
4 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025
31 Maj 2025
31 Maj 2025