Perel 4605 Manual

Perel Slibning 4605

Læs gratis den danske manual til Perel 4605 (15 sider) i kategorien Slibning. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Perel 4605, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/15
4605-B PEREL
1
4605-B - WET AND DRY GRINDER 200W
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying a PEREL TOOLS 200W wet and dry grinder! Unpack the device. Please check carefully that
there is no damage caused by transportation. If there is, consult your dealer and don’t use this device.
2. Safety Instructions
WARNING
Always take the necessary safety precautions when using electric devices in order to reduce the risk of fire,
electroshock, etc. Read all instructions thoroughly and take into account the limitations of this device and the possible
risks in using it.
1. Do NOT use the device unless the wheel guards are installed.
2. Only use the wet wheel in wet condition to avoid damage.
3. Keep the work area clean. A cluttered work area invites injuries.
4. Do not expose the device to rain. Don't use it in a damp or wet environment. Keep the work area well lit. Don't
use the device in the vicinity of presence of flammable liquids or gases.
5. Do not let visitors touch the tool or the extension cord. Keep all visitors away from the device, especially
children.
6. When not in use the device should be stored in a dry environment that is inaccessible to children.
7. Do not force the device. It will do the job better and safer at the rate for which it was intended.
8. Use the right device. Do not use a light device for a heavy-duty job. Only use the device for its intended
purpose.
9. Wear the right clothes. Do not wear loose clothing or jewellery as they can get caught in moving parts. Rubber
gloves and non-skid footwear are recommended when working outdoors. Wear protective headgear if you have
long hair.
10. Wear safety glasses and also wear a face mask when working in a dusty environment.
11. Do not overreach. Be careful not to lose your footing and don't lose your balance!
12. Maintain the device to ensure better performance. Follow the instructions with reference to lubrication and the
replacement of accessories. Inspect the cables periodically and have them replaced if they are damaged. Keep
all handles dry, clean and free from oil and grease.
13. Always make sure all adjusting keys and spanners have been removed before the device is switched on.
14. Don't carry the device around with your finger on the switch in order to avoid accidental starting.
15. Use common sense. Watch what you're doing and don't operate the device when you're tired.
16. If a part is damaged, you should check carefully whether the device will still operate properly. Check the
alignment of moving parts, the installation of the device and all other elements that may affect its operation.
Damaged guards should be repaired or replaced by qualified personnel. Have defective switches replaced by
authorised personnel. Do not use the device if the switch doesn't turn it on and off.
17. Do not use accessories or attachments that are not included in the original packaging.
18. Replacement parts must always be identical to the original ones.
19. Save these instructions for future reference.
4605-B PEREL
2
3. Additional Safety Instructions
1. The distance between the spark guard and the grinding wheel must not exceed 2mm.
2. The distance between the workpiece support and the grinding stone must not exceed 2mm.
3. Never use damaged grinding wheels.
4. Replace the grinding wheel when the wheel has worn by 40mm.
MOUNTING THE MACHINE
The machine must be screwed to a workbench. Mark the position of the mounting holes on the workbench. Drill holes
at each of the marked positions, adjusting the diameter and depth of the holes to the screws used. Place the
machine on the workbench and insert the screws into the mounting holes. Tighten the screws.
REPLACING A GRINDING WHEEL
Always unplug the grinder before replacing a grinding wheel. Never use a cracked grinding wheel. Replace a cracked
grinding wheel immediately. A cracked grinding wheel may break into pieces when used and cause injuries.
MOUNTING AND ADJUSTING THE SPARK GUARDS
Adjust the position of the spark guards frequently to compensate for the wear of the grinding wheels. Mount the spark
guard on the wheel guard with the screw. Keep the distance between the spark guard and the grinding wheel as
small as possible (max. 2mm). Tighten the spark guard screw and lower the screen. Tighten the nut.
ADJUSTING THE WORKPIECE SUPPORTS
Adjust the position of the workpiece supports frequently to compensate for the wear of the grinding wheels. Loosen
the adjusting screw. Keep the distance between the workpiece support and the grinding wheel as small as possible
(max. 2mm). Tighten the adjusting screw.
4. Description

Produkt Specifikationer

Mærke: Perel
Kategori: Slibning
Model: 4605

Har du brug for hjælp?

Hvis du har brug for hjælp til Perel 4605 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Slibning Perel Manualer

Perel

Perel 4605 Manual

5 August 2024

Slibning Manualer

Nyeste Slibning Manualer

Parkside

Parkside KH 3167 Slijpen Manual

27 September 2024
Powerplus

Powerplus pow 2081 Manual

26 August 2024
Powerplus

Powerplus pow x060 Manual

26 August 2024
Powerplus

Powerplus pow xq5104 Manual

26 August 2024
Powerplus

Powerplus pow 204 Manual

26 August 2024
Powerplus

Powerplus pow 2080 Manual

26 August 2024
Proxxon

Proxxon TG 125-E Manual

26 August 2024
Proxxon

Proxxon LHW Manual

25 August 2024
Duro

Duro MD 10946 Manual

24 August 2024
Toledo

Toledo TSM-125W Manual

23 August 2024