Phanteks Glacier One 240 T30 Manual

Phanteks Hardwarekoeling Glacier One 240 T30

Læs gratis den danske manual til Phanteks Glacier One 240 T30 (2 sider) i kategorien Hardwarekoeling. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Phanteks Glacier One 240 T30, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Pump & Fan cables

A) Connect the Fans together with the Daisy-chain cables

and use the Fan PWM Extension Cable to reach the

motherboard.

Choose between 2 congurations:

B1) PWM Splitter Cable Use the to connect the pump

and fans to a single motherboard CPU header.

B2) If 2x CPU headers are available on the motherboard,

the pump and fans can also be connected individually

(without PWM Splitter Cable) for more precise control.

GLACIER ONE HIGH PERFORMANCE CLOSED LOOP CPU LIQUID COOLER

GLACIER ONE 240 T30

• Innity Mirror Cap

• 240x38 mm Radiator

• 2x 120mm T30 Fans

Package Contents

5. Install Infinity Mirror Cap and Tube Clips

6. Connect cables

As a Phanteks customer, you are priority number one. We have a dedicated team of employees across the globe to deliver the

experience you deserve.

CUSTOMER C ARE

R M A A ND T E C H N I C A L S U P P O R T A M E R I C A S

Hours : Monday-Friday 9:00-5:00 PST

Phone number : +1(909)598-2115

Email : support@phanteksusa.com

Facebook : @Phanteks

For spare parts and optional upgrades please visit:

www.axpertec.com (EU www.phanteksusa.com (US)) |

R M A A ND T E C H N I C A L S U P P O R T I N T E R N AT I O N A L

Email : support@phanteks.com

Facebook : @Phanteks

7. Support & Warranty

4x AM4 Stand-o

4x 115x/1200 Stand-o

4x 2066 Stand-o

4x Thumb Nut

8x 39mm Halos Screws

8x 36mm Fan Screws

8x 5mm Radiator Screws

8x Washers

Manual V1.0

Accessories

Screws:

A) The Innity Mirror Cap

simply snaps into place

via strong magnets.

Make sure the D-RGB

cable stays clear from

the Thumb Nut.

B) OPTIONAL: Install the (3x) included

Tube Clips for a tidy tube routing.

Simply snap the clips on the tubes.

D-RGB Cables

D-RGB cable connection

The D-RGB lighting can be controlled through a D-RGB

equipped Phanteks chassis/controller or motherboard.

A) To Phanteks D-RGB Chassis/Controller

Connect the chassis D-RGB connector to the Innity Mirror

Cap and/or Halos.

B) To D-RGB Motherboard

Use the 3-Pin D-RGB Motherboard Adapter to connect the

D-RGB cable to a D-RGB equipped motherboard (A-RGB*).

*follow motherboard manual for instruction on D-RGB control

Fan cables can be routed through the

middle of the Tube Clips

4-Pin PWM Splitter Cable, 2x

80mm

4-Pin Fan PWM Extension Cable,

500mm

3-Pin D-RGB Motherboard

Adapter, 600mm

PH-NDC Thermal Compound

3x Tube Clips

Intel 115x/1200/1366

Backplate

AMD AM4 Bracket

(Intel Bracket is pre-installed)

3 x

daisy chain fans

to PWM Splitter Cable

Fan PWM Extension Cable

to Motherboard

CPU header

to Pump

to Fans

Pump PWM Cable

D-RGB Chassis

or D-RGB controller

innity mirror cap

and/or HALOS

to 3rd Party

D-RGB products

(optional)

to D-RGB Motherboard

D-RGB

Lighting

Product

3-Pin D-RGB Motherboard Adapter

To D-RGB Lighting Products

All Phanteks D-RGB lighting products can be daisy-chained

together

D-RGB Lighting ProductD-RGB Lighting Product

100%

PWM signal

1200 RPM

500 RPM

2000 RPM

3000 RPM

Advanced mode

Performance mode (recommended)

Hybrid mode

RPM

50%

1. T30 Fan preparation

The T30 fan supports 3 dierent fan proles via a switch on

the fan hub. Please choose your preferred fan prole before

installing the fan into your system.

We recommend the default ‘Performance mode’.

Mode switch

3. Installing the pump block

4. Mount the radiator and fans

2. Motherboard preparation (follow instructions for the corresponding socket)

AMD Socket AM4

INTEL Socket 115X / 1200 / 1366

INTEL Socket 2011 & 2066

A) Remove the stock mounting brackets

A) This step is for AMD AM4 socket only

(for Intel socket installation, go to step 3B)

We recommend to install the fans to the radiator before

mounting it into the chassis.

3 Types of screws are included to mount the radiator and

the fans in dierent options:

Remove the Intel bracket

from the pump

1. Push the Intel bracket in

2. Rotate to loosen

3. pull the bracket o

Secure the AMD AM4

Bracket to the pump

4. push the AMD bracket in

5. rotate to fasten the bracket

A) Prepare the Intel Backplate for the correct socket

A) Secure the 4x Intel 2011/2066 Stand-os to the motherboard

B) Secure the 4x AM4 Stand-os to the motherboard

B) Secure the pump unit to the

stand-os on the motherboard

with the 4x Thumb Nuts

B) Secure the 4x 115x/1200/1366 Stand-os

to the motherboard and Intel Backplate

The thermal compound is pre-applied.

More thermal compound is included for

future installations

Use the optional if necessary on the washers

chassis for a secure t

Use the to mount the fan to the 36mm fan screw

radiator (and chassis)

Use the 5mm radiator screw to mount the radiator

directly to the chassis

Use the to mount the Halos and 39mm Halos screw

fans to the radiator (and chassis)

5mm radiator screw

36mm fan screw

5mm radiator screw

39mm Halos screw

115x/1200

1366

4 x

Option B:

Option A:

Option C (When using Halos only):

Produkt Specifikationer

Mærke:	Phanteks
Kategori:	Hardwarekoeling
Model:	Glacier One 240 T30
Type:	Væskekølingssæt
Antal pr. pakke:	1 stk
Produktfarve:	Black, Grey
Omdrejningshastighed (maks.):	300 rpm
Kabler inkluderet:	3-pin, 4-pin
Belysningsfarve:	Flere
Støjniveau (lav hastighed):	11.1 dB
Støjniveau (høj hastighed):	39.7 dB
Antal blæsere:	2 blæser(e)
Passende til rumtype:	Processor
Ventilator diameter:	120 mm
Maksimal luftstrøm:	101 kubikfod/min.
Antal ventilatorblade:	7
Ventilatorstik:	4-polet
Understøttede procesorsokler:	LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1366 (Socket B), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM4, Socket TR4, Socket sTRX4
Understøttelse af puls-bredde modulering (PWM):	Ja
Køler bredde:	273 mm
Køler dybde:	120 mm
Køler højde:	38 mm
Maksimalt lufttryk:	0.28 mmH2O
Rørlængde:	400 mm
Antal klip:	3
Minimum lufttryk:	0.05 mmH2O
Ventilator dimensioner (BxDxH):	120 x 120 x 30 mm
Belysning LED:	Ja
Lejetype:	Magnetisk levitationsleje
Lamelmateriale:	Aluminium
Ventilatorens middeltid til fejl (MTTF):	150000 t