Philips hs 970 Scheerapparaat Manual
Philips
barbermaskine
hs 970 Scheerapparaat
Læs nedenfor 📖 manual på dansk for Philips hs 970 Scheerapparaat (88 sider) i kategorien barbermaskine. Denne guide var nyttig for 11 personer og blev bedømt med 5.0 stjerner i gennemsnit af 6 brugere
Side 1/88
970
100
80
60
40
20
To protect the environment, this
rechargeable Philishave appliance is
equipped with nickel-hydride batteries.
These contain less than 0.01% cadmium.
Yet we advise you to ensure that the batteries
are separated from the normal household
refuse and that they are disposed of at an
officially assigned place when discarding your
appliance in due course. Please refer to section
“Protecting the environment”.
■■■ Switching on/off
3 The slider switch has a locking
knob which prevents the shaver
from being switched on
accidentally.
Keeping the small knob on the
switch pressed-in slide the
switch upwards/downwards.
■■■ Charging
•Ensure that the shaver is switched off.
•It is advisable to charge the shaver at tem-
peratures between 5°and 35°C (41°and 95°F).
This guarantees maximum life from the
rechargeable batteries.
•If you keep the shaver in the case when
charging ensure that the lid is left open to
prevent overheating.
•Before first use (or if the shaver has not been
used for a long time) it should be charged for a
period of at least 8 hours.
4
3
■■■ Shaving
11 Switch on.
12 The comfort control can be adjusted to suit
skin sensitivity.
Start with the control set to position 1(for sensitive
skin) and then try other positions to find the one
that suits you best.
13 Move the shaving unit quickly over the skin
and especially against the direction of the hair
growth, stretching the skin with your free hand to
bring the hairs into an upright position.
• Best results are obtained if the skin is dry.
Preferably shave before or some time after
washing.
• If required apply a pre-shave lotion. This can be
particularly helpful if the climate is warm and
humid.
8
11
1 2 3 4 5 6 7 8 9
12 13
■■■ Cleaning
• Always ensure that the mains cord is disconnected
and the shaver is switched off before carrying out
maintenance or cleaning.
• Handle the shaving heads carefully to avoid
causing damage.
•Advice: Clean the shaver regularly.
17-20 Every week:
shaving head slots and hair chamber
- (Fig. 17) Use the short bristled brush to clean the
shaving head slots.
- (Fig. 18) To remove the shaving unit depress the
retaining button (1) and lift the shaving unit from
the shaver (2).
- (Fig. 19/20) Remove hairs from the chamber and
shaving unit using the long bristled brush.
10
17
19
20
18
1
2
17-32 Every 3 months:
shaving head slots, the hair chamber and
shaving unit (guards and cutters)
(If your skin is of an oily type or if you have been
using a pre-shave lotion: 1x per month.)
- First clean the shaver head slots and hair chamber
as previously described. (See figs. 17-20.)
Then proceed with figs. 21-32 for cleaning the
shaving unit.
- (Fig. 21 - 22) Release and remove the retaining
plate.
The shaving heads remain in the shaving unit.
- (Fig. 23) Remove only one shaving head (guard
and cutter) at a time for cleaning to ensure that the
cutters and guards do not become mixed.
Each cutter has been ground together with the
guard. If the guards and cutters are mixed, it may
take some weeks before optimal shaving
performance is restored.
- (Fig. 25) Clean the cutter by brushing only in the
direction of the arrow using the short bristled
brush. 11
2
1
22 23
24 25 26
21
- (Fig. 27 & 32) If you have a very dry skin, or if
degreasing liquid (e.g. alcohol) has been used to
clean the shaving heads, lubricate the shaving
heads with one drop of light machine oil.
As an alternative to using light machine oil for
lubrication you may use the specially formulated
Philishave cleaner/lubricant type 389 SHC/1
available from Authorised Philips Service Dealers.
■■■ Replacement shaving heads
33 Use only Philishave replace-
ment heads type HP 1915 R
when replacing worn or
damaged shaving heads.
33
2
1
27 29
30 31
28
32
OIL
OIL
12
■■■ Protecting the environment
34-39 When eventually discarding your shaver
please remove the rechargeable batteries and
dispose of them at an officially assigned refuse site.
Please note: You can also take the appliance to a
Philips Service Centre. The staff will be happy to help
you.
-(Fig. 34) First ensure that the shaver is
disconnected from the mains supply.
- Before removing the batteries should be
completely empty. Let the appliance run until the
motor stops.
- (Fig. 36) Use a small screwdriver (blade width
approx. 3 mm) or a Torx T-8 type screwdriver.
- (Fig. 38 & 39) The batteries may be recognised by
the print NIMH.
Do not connect the appliance to the mains supply
after the batteries have been removed.
14
37 38
35 36
34
39
Produkt Specifikationer
| Mærke: | Philips |
| Kategori: | barbermaskine |
| Model: | hs 970 Scheerapparaat |
Har du brug for hjælp?
Hvis du har brug for hjælp til Philips hs 970 Scheerapparaat stil et spørgsmål nedenfor, og andre brugere vil svare dig
barbermaskine Philips Manualer
12 Marts 2025
12 Marts 2025
12 Februar 2025
14 Januar 2025
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
6 December 2024
barbermaskine Manualer
- barbermaskine Ufesa
- barbermaskine Aurora
- barbermaskine Orbegozo
- barbermaskine G3 Ferrari
- barbermaskine Remington
- barbermaskine Eldom
- barbermaskine Duronic
- barbermaskine Adler
- barbermaskine OBH Nordica
- barbermaskine Leifheit
- barbermaskine Sencor
- barbermaskine Philco
- barbermaskine Niceboy
- barbermaskine Rowenta
- barbermaskine PRIME3
Nyeste barbermaskine Manualer
13 Februar 2025
14 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
5 Januar 2025
2 Januar 2025
30 December 2025
30 December 2025
25 December 2024