Philips SpeedPro Aqua FC6730 Manual

Philips Støvsuger SpeedPro Aqua FC6730

Læs gratis den danske manual til Philips SpeedPro Aqua FC6730 (5 sider) i kategorien Støvsuger. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Philips SpeedPro Aqua FC6730, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

>75 % recycled paper

>75 % papier recyclé

3000.062.6140.3 (07/2022)

> 75% 循环再造纸

保留备用

English

Important safety information

Read this important information carefully before you use the appliance and its accessories and save it

for future reference. The accessories supplied may vary for different products.

Danger

- Never vacuum up water or any other liquid. Never vacuum up flammable substances and do not

vacuum up ashes until they are cold.

- Never immerse the appliance or the adapter in water or any other liquid, nor rinse it under the tap.

Warning

- Check if the voltage indicated on the adapter corresponds to the local mains voltage before you

connect the appliance.

- Always check the appliance before you use it. Do not use the appliance or the adapter if it is

damaged. Always replace a damaged part with one of the original type.

- The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as

this causes a hazardous situation.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- Always keep the magnetic charging disc away from very small children.

- The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.

- Unplug the adapter if you are not going to use the appliance for some time.

- When storing the appliance for more than a month (without usage or charging), make sure that the

battery is charged to at least 50%. Storing the appliance with an empty battery may lead to

irreversible damage to the battery.

- Also make sure that the adapter is unplugged when the appliance is stored.

- Do not let the motorized brush move over the mains cords of other appliances or other cables as

this may cause a hazard.

- Keep loose clothing, hair and body parts away from the motorized brushes.

- Do not cover or block the ventilation openings when the appliance is operating.

- This vacuum cleaner is designed for household use only. Do not use this vacuum cleaner to vacuum

up building waste, cement dust, ashes, fine sand, lime and similar substances. Never use the vacuum

cleaner without any of the filters. This could damage the motor and shorten the life of the vacuum

cleaner. Always clean all parts of the vacuum cleaner as shown in the user manual. Do not clean any

parts with water and/or cleaning agents if this is not specifically shown in the user manual.

- Only charge the appliance with the adapter supplied. Only use 29V adapter ZD12D290050CN or

25V adapter ZD12D250050CN. The corresponding adapter number can be found on the adapter.

- Charge, use and store the product at a temperature between 5°C and 40°C.

- Do not open, modify, pierce, damage or dismantle the product or battery to prevent batteries from

heating up or releasing toxic or hazardous substances. Do not short-circuit, overcharge or reverse

charge batteries.

- Keep product and batteries away from fire and do not expose them to direct sunlight or high

temperatures.

- If the product becomes abnormally hot or smelly, changes color or if charging takes longer than

usual, stop using and charging the product and contact Philips.

- Do not place products and their batteries in microwave ovens or on induction cookers.

- If batteries are damaged or leaking, avoid contact with the skin or eyes. If this occurs, immediately

rinse well with water and seek medical care.

- This product contains a rechargeable battery. The battery may only be replaced by a qualified

service engineer.

- Take the appliance to an authorized Philips service center when you can no longer recharge it or

when it runs out of power quickly.

- To prevent damage, never put ethereal oils or similar substances in the water tank or let the

appliance pick them up.

Caution

- During charging, the adapter becomes warm to the touch. This is normal.

- Do not plug in, unplug or operate the appliance with wet hands.

- Do not remove the adapter from the wall socket by pulling at the cord (Fig. 1). When you do not

use the charging station for charging, always unplug the appliance by first detaching the magnetic

charging disc from the underside of the appliance (Fig. 2).

- Always switch off the appliance after use and before you charge it.

- Never block the exhaust air openings during vacuuming.

- Do not clean the dust container and the dust container lid in the dishwasher. They are not

dishwasher-proof.

- Make sure to wash the filter at least once every two weeks by hand only, to ensure best

performance. Squeeze until the water is clean. Let the filter dry for 24 hours before reuse.

- Do not clean the filter with scouring pads or abrasive cleaning agents.

- Always use the vacuum cleaner with the filter assembled.

- If you clean the filter with water, make sure that it is completely dry before you put it back into the

dust container. Do not dry the filter in direct sunlight, on the radiator or in the tumble dryer.

- Replace the filter if it can no longer be cleaned properly or if it is damaged (see 'Ordering

accessories').

- Never use any accessories or parts from other manufacturers or that Philips does not specifically

recommend. If you use such accessories or parts, your warranty becomes invalid.

- Use and store the appliance at a temperature between 5°C and 40°C.

- Make sure that the appliance is installed with the charging station attached to the wall according to

the instructions in the user manual.

- Be careful when you drill holes in the wall to attach the charging station, to avoid the risk of electric

shock.

- As this appliance uses water to clean, the floor may remain wet and slippery for a while (Fig. 3).

- To prevent damage, never put wax, oil, floor maintenance products or liquid floor cleaners that are

not water-dilutable in the water tank.

- Do not mix different types of liquid floor cleaner. When you have used one liquid floor cleaner, first

empty and rinse the water tank before you add another liquid floor cleaner to the water in the

water tank.

- To prevent damage, do not use liquid floor cleaners that are not transparent or even milky.

- Never exceed the maximum quantities mentioned on the bottle when you use a liquid floor cleaner.

Do not add more than a few drops to the water in the water tank, as this tank has a capacity of

200ml.

- Do not lift or tilt the nozzle when the water tank is assembled and full, as water may spray out of

the water tank.

- Do not clean the metal wetting strip with a sharp object, as this may damage the strip. Only clean

the wetting strip by rinsing it under the tap. Replace the wetting strip when you can no longer clean

it.

- Replace the wetting strip only with an original strip. For ordering a new strip, see chapter 'Ordering

accessories'.

- Clean the water tank according to the instructions. The water tank is not dishwasher-proof.

- Do not use aggressive cleaning agents or tools to clean the Aqua Boost pedal.

- After mopping the floors, do not store the appliance with the water tank attached on the charging

station. If you do this, the wet mopping pad will touch the wall and this may damage the wall.

Always remove the water tank before you store the appliance.

- To guarantee good cleaning results and proper functioning of the appliance and water tank, always

use original Philips cleaning pads.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to

electromagnetic fields.

Using the appliance

Usage restrictions

- Only use the water tank on hard floors with a water-resistant top coat (such as linoleum, enameled

tiles and varnished parquet) and stone floors (such as marble). If your floor has not been treated to

make it water-resistant, check with the manufacturer if you can use water to clean it. Do not use the

water tank on hard floors of which the water-resistant top coat is damaged.

- Only use the water tank on linoleum floors that are properly affixed to prevent linoleum from being

drawn into the mopping nozzle.

- Do not use the water tank to clean carpets.

- Do not move the appliance with water tank assembled sideways, as this leaves water traces. Only

move forwards and backwards.

Note: The operating time depends on the power level used during cleaning.

Mopping pad and wetting strip

The appliance comes with one wetting strip and two microfiber mopping pads. With the water tank,

wetting strip and microfiber mopping pad attached to the standard floor nozzle, you can clean hard

floors.

Using liquid floor cleaner in the water tank

If you want to add a liquid floor cleaner to the water in the water tank, make sure that you use a low-

foaming or non-foaming liquid floor cleaner that can be diluted in water. As the water tank has a

capacity of 200ml, you only have to add a few drops of liquid floor cleaner to the water.

Cleaning the water tank

To clean the water tank, mix one part vinegar with three parts water. Pour this mixture into the water

tank and close the cap. Shake the water tank and put the water tank on a water-resistant surface. Leave

the water-vinegar mixture in the water tank overnight. Then empty the water tank, rinse it thoroughly

with fresh water, and use it normally again.

Caution: Water will leak from the water tank during cleaning, with and without the wetting strip

attached to the nozzle.

To empty the water tank, hold the water tank over a sink, remove the cap and tilt the water tank to the

side of the filling hole. Then turn the water tank over to let the water flow into the sink. To remove the

remaining water from the water tank, turn the water tank on its long side with the filling hole pointing

towards the sink. Then tilt the water tank forwards to let the remaining water flow out of the water

tank.

Note: Always store the water tank with the cap removed from the filling hole.

Ordering accessories

To buy accessories or spare parts, visit or go to your Philips www.philips.com/parts-and-accessories

dealer. You can also contact the Philips Consumer Care Center in your country (see the international

warranty leaflet for contact details).

Warranty and support

If you need information or support, please visit or read the internationalwww.philips.com/support

warranty leaflet.

Recycling

- This symbol means that electrical products and batteries shall not be disposed of with normal

household waste (Fig. 4).

- Follow your country’s rules for the separate collection of electrical products and batteries.

Removal of built-in rechargeable battery

The built-in rechargeable battery must only be removed by a qualified professional when the appliance

is discarded. Before removing the battery, make sure that the appliance is disconnected from the wall

socket and that the battery is completely empty.

Take any necessary safety precautions when you handle tools to open the appliance

and when you dispose of the rechargeable battery.

When you handle batteries, make sure that your hands, the product and the batteries

are dry.

To avoid accidental short-circuiting of batteries after removal, do not let battery

terminals come into contact with metal objects (e.g. coins, hairpins, rings). Do not

wrap batteries in aluminum foil. Tape battery terminals or put batteries in a plastic bag

before you discard them.

1 Disconnect the appliance from the wall socket and let it run until the motor stops.

2 Remove the dust container from the appliance.

3 Pull the display cover from the top of the handgrip (Fig. 5).

4 Undo the screw of the handle cover and pull the handle cover off the appliance (Fig. 6).

5 Undo the bottom cover screw (1) and then remove the side panels. (Fig. 7)

6 Remove the bottom cover screws on the left and right side (1). Then remove the bottom cover (2)

(Fig. 8).

7 Disconnect the battery connector and the display connector from the printed circuit board (Fig. 9).

8 Undo the battery frame screws (Fig. 10).

9 Remove the battery from the appliance and dispose of it according to the rules (Fig. 11).

Operating time

Using the appliance with Turbo power mode

(Setting 2)

22 minutes*

Using the appliance with regular power mode

(Setting 1)

50 minutes*

* Based on use of the appliance with the Aqua Nozzle

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you

are unable to solve the problem with the information below, visit for a listwww.philips.com/support

of frequently asked questions or contact the Consumer Care Center in your country.

Problem Possible cause Solution

The appliance does not

work when I push the

button.

When the battery is

empty,the bottom segment

of the display flashes red.

To charge the battery, connect the

appliance to the charging station or

attach the magnetic charging disc of the

charging station directly to the the

handheld vacuum cleaner.

You have to push the slider

forward to switch on the

appliance.

Push the slider forward to setting 1 to

switch on. Increase the suction power

further by pushing the slider to setting 2

to clean dirty surfaces.

The appliance has a lower

suction power than usual.

The filter and the cyclone are

dirty.

Clean the filter and the cyclone. Make

sure that you wash the sponge filter at

least once every two weeks if you use

the appliance regularly.

You have not attached the

dust container lid properly to

the dust container. You have

not attached the dust

container to the appliance

properly. In both cases, there

will be a loss of suction

power.

Make sure that you attach the dust

container lid to the dust container and

the dust container to the appliance

properly.

An object may be stuck

inside the tube.

Remove the tube and check for

blockages.

Dust escapes from the

appliance.

The filter is dirty. Clean the filter.

The filter is not present in the

appliance.

Make sure that the filter is in the

appliance and assembled correctly.

Something blocks the

cyclone.

Check the cyclone for objects stuck in it

and remove any object that blocks the

cyclone.

If dust falls out of the dust

container, the dust container

lid is probably not attached

properly to the dust

container.

Empty the dust container and attach the

dust container lid correctly.

The appliance does not

move smoothly across the

floor when cleaning a

carpet.

You selected a too high

suction power.

Reduce the suction power by choosing

setting 1.

The brush does not turn

anymore.

The brush encounters too

much resistance.

Clean the brush with a pair of scissors or

by hand.

The brush may stop turning

when it encounters too much

resistance from high-pile

carpet.

Switch off the appliance and then switch

it back on again.

You have not installed the

roller brush in the nozzle

properly after cleaning.

Follow the instructions in the cleaning

chapter of the user manual to slide the

roller brush into the nozzle properly and

secure it inside the nozzle by snapping

home the locking lever.

The LEDs in the nozzle do

not come on.

You have not attached the

nozzle to the appliance or

handheld properly.

Attach the nozzle to the appliance or

handheld properly.

The appliance is not

charging.

The magnetic connector is

not connected correctly to

the charging disk or the

adapter is not inserted into

the wall socket properly.

Make sure that the magnetic connector

is connected properly to the charging

disk and that the adapter is inserted into

the wall socket properly.

You have not connected the

correct adapter and cord.

Make sure that you use the correct

adapter and cord.

If you have checked the above and the

appliance still does not charge, take it to

a Philips service center or contact the

Consumer Care Center via

www.philips.com/support.

FC6729: The mini turbo

brush does not function

properly.

The roller brush is blocked. Remove hairs from the brush with a pair

of scissors (see user manual).

The roller brush is blocked by

fabric or surfaces during

cleaning.

Keep the mini turbo brush aligned with

the surface and do not push the turbo

brush into soft surfaces.

The mini turbo brush is not

fully closed.

Make sure that the top and bottom

parts of the mini turbo brush are

properly connected and there is no gap

between the two parts. Check if the

locking ring is in closed position (see

user manual).

When I use my vacuum

cleaner I sometimes feel

static electricity shocks.

Your vacuum cleaner builds

up static electricity. The

lower the air humidity, the

more static electricity the

appliance builds up.

Discharge the appliance by frequently

holding the tube against other metal

objects in the room (for example the

legs of a table or chair, etc.). You can

also raise the air humidity level in the

room.

You vacuumed up fine sand,

lime or a similar substance.

This also causes static

electricity.

Empty the dust container and clean the

filter according to the instructions in the

user manual.

The bottom segment of

the display flashes red.

The battery is empty. Charge the battery by connecting the

appliance to the charging station. You

can also charge the appliance directly by

inserting the adapter into the wall

socket and attaching the magnetic

charging disc to the underside of the

appliance.

All segments of the display

flash quickly.

An error has occurred. Check for any blockages in the tube or

nozzle. Try recharging the appliance,

emptying the dust container and

cleaning the filter. If this does not help,

take the appliance to a Philips service

center or contact the Consumer Care

Center via www.philips.com/support.

The middle segment of the

display flashes white and

the bottom segment of

the display flashes red.

The appliance is stored or

charged at temperatures

below 5 °C.

Move the appliance to a warmer room.

Do not store or charge the appliance at

temperatures below 5 °C or above 40 °C.

The water flow from the

water tank is reduced.

The wetting strip is blocked

by excessive residue.

Remove the wetting strip and clean it.

The microfiber mopping pad

is not placed correctly and

blocks the wetting strip as a

result. This prevents water

from flowing out of the

wetting strip.

Make sure that you place the mopping

pad correctly. Check the user manual for

proper placement.

The water tank is empty or

nearly empty.

Refill the water tank.

You use a microfiber

mopping pad that is not

supplied by Philips.

Only use an original Philips microfiber

mopping pad. You can buy these

mopping pads in the online Philips shop

at www.philips.com/parts-and-

accessories or at your Philips dealer. You

can also contact the Philips Consumer

Care Center in your country (see the

international warranty leaflet for contact

details).

The output of water is

faster and larger than

normal.

If the water tank produces an

uncontrolled and too large

amount of water, the cap of

the tank is probably not

closed properly.

Check the cap and make sure it is fully

and properly closed.

The strip is not placed

properly in the bottom of the

water tank.

Check the strip and make sure that it is

fitted properly in the bottom plate of the

water tank.

The floor dries with stripes

when I use the water tank.

You added too much liquid

cleaner to the water.

Use only a few drops or use a cleaner

that foams less.

Produkt Specifikationer

Mærke:	Philips
Kategori:	Støvsuger
Model:	SpeedPro Aqua FC6730
Tænd-/slukkontakt:	Ja
Vægt:	2450 g
Antal pr. pakke:	1 stk
Produktfarve:	Blå
Opladningstid:	5 t
Batterispænding:	18 V
Produkttype:	Stick vakuum
Batteriteknologi:	Lithium
Støjniveau:	80 dB
Strømkilde:	Batteri
Kan monteres på væggen:	Ja
AC-adapter inkluderet:	Ja
Luftstrøm:	800 l/s
Vaskbart filter:	Ja
Maksimal indgangseffekt:	- W
Støvbeholder type:	Poseløs
Støvkapacitet:	0.28 L
Rengøringstype:	Våd
Vakuum luftfiltrering:	Cyclonisk
Arbejdsområde:	60 m
Jordadskillelsesmetode:	Cyclonisk
Kørselstid:	40 min.
Aftageligt filter:	Ja
Effektstyring:	Elektronisk
Hjulenes materiale:	Gummi
Teleskoprør:	Ja
Indikator for fuld støvbeholder:	Ja
Rentvandsbeholder volumen:	0.28 L
Spildevandsbeholder volumen:	0.4 L
Aftagelig håndholdt støvsuger:	Ja
Antal inkluderede mikrofiberpuder:	1 stk
Overfladedækning pr. tank:	60 m²
Antal vandtanke:	1