a division of Philips North America LLC
P.O. Box 10313, Stamford, CT 06904
This symbol on the product’s
nameplate means it is listed by
Underwriters’ Laboratories, Inc.
Norelco and Tripleheader are registered
trademarks of Philips North America LLC.
PHILIPS and Philips shield are registered
trademarks of Koninklijke Philips N.V.
©2022 Philips North America LLC. All rights
300008489771 (06/15/2022)
When using an electric product, basic
precautions should always be followed,
Read all instructions before using this
To reduce the risk of electric shock:
-To charge the product, only use a USB
power source on a certied product
with output rating 5V, ≥ 1A. For safe
charging in a moist environment (e.g. in
a bathroom), only use an IPX4 (splash-
proof) power source. A suitable power
source (e.g. Philips HQ87) is available
via www.philips.com/support. If you
need support nding the correct USB
power source, contact Philips support at
1-800-243-3050. Using a non-certied USB
power source may cause hazards or serious
-Keep the USB cable and the USB power
Do not reach for a corded product that has
fallen into water. Unplug immediately from
-Do not place or store the product where it
can fall or be pulled into a tub or sink. Do
not place or drop the product into water or
-This product does not work while it is
connected to the power outlet. Except
when charging, always unplug this product
-Remove USB power source from power
outlet and product before cleaning.
To reduce the risk of burns, re, electric
shock, or injury to persons:
-This product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the product
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the product.
-Use this product only for its intended
household use as described in this manual.
Misuse can lead to hazards or serious
injuries. Do not use attachments not
recommended by Philips North America
LLC. Accessories supplied may vary for
-Never operate this product if it has a
damaged USB power source, if it is not
working properly, after it has been dropped
or damaged, or after the product or the
USB power source has been dropped into
water. For assistance call 1-800-243-3050.
-Keep the USB cable and the USB power
source away from heated surfaces.
-Never drop or insert any object into any
-Do not use the USB power source in or near
a power outlet that contains an electric air
freshener to prevent damage to the USB
-Do not use product outdoors or operate
where aerosol (spray) products are
being used or where oxygen is being
-Always check shaving heads (guards and
cutters) before using the product. Do not
use the product if cutters or guards are
damaged, as injury may occur.
-Always attach the USB cable to the USB
power source and the product rst, then
attach the USB power source to the power
outlet. To disconnect, set all controls to
‘o’ position. Then remove the USB power
source from the power outlet.
-Plug USB power source directly into power
outlet. Do not use an extension cord.
-Unplug USB power source before plugging
in or unplugging the product.
-Only use original Philips accessories or
-Charge, use and store the product at a
temperature between 41 °F / 5°C and
-Keep product and batteries away from re
and do not expose them to direct sunlight
-If the product becomes abnormally hot or
smelly, changes color or if charging takes
longer than usual, stop using and charging
the product and contact Philips.
-Do not place products and their batteries in
microwave ovens or on induction cookers.
-Do not open, modify, pierce, damage or
dismantle the product or battery to prevent
batteries from heating up or releasing
toxic or hazardous substances. Do not
short-circuit, overcharge or reverse charge
-If batteries are damaged or leaking, avoid
contact with the skin or eyes. If this occurs,
immediately rinse well with water and seek
-When you handle batteries, make sure that
your hands, the product and the batteries
-To avoid accidental short-circuiting of
batteries after removal, do not let battery
terminals come into contact with metal
objects (e.g. coins, hairpins, rings). Do not
wrap batteries in aluminum foil. Tape
battery terminals or put batteries in a
plastic bag before you discard them.
-This product is waterproof (Fig. 3). It is
suitable for use in the bath or shower
and for cleaning under the tap. For safety
reasons, the product can therefore only be
-Because of hygiene, only one person should
-Do not use a damaged appliance. Replace
damaged parts with new Philips parts.
-Before cleaning and storing the product,
switch o the product and disconnect it
-Clean the product and the attachments
after each use for optimal performance.
-Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive
liquids to clean the appliance.
-Let the product and its attachments dry
completely before storing.
-Do not wrap cord around the product
-Store cord and other accessories in a safe
location where these will not be cut or
3 Shaving unit release button
7 Battery charge indicator
Note: A suitable power source
(e.g. Philips HQ87) is available via
Congratulations on your purchase and
welcome to Philips Norelco! To fully benet
from the support that Philips oers, register
your product at .www.philips.com/welcome
Danger: Keep the USB cable and the USB
power source dry (Fig. 2).
Fully charge the product before rst use and
when the display indicates that the battery is
Charging takes approx. 1 hour. A fully charged
shaver provides up to 50 minutes of shaving
1 Make sure that the product is switched o.
2 Insert the small plug of the USB cable into
the socket in the bottom of the product.
3 Insert the USB plug into the USB power
source (not included) (Fig. 4).
4 Insert the USB power source into the power
The battery indicator starts to ash white
5 After charging, remove the power source
from the power outlet, pull the USB plug
out of the power source and then pull the
small plug out of the product (Fig. 7).
When the battery is almost empty, the battery
charge indicator ashes orange (Fig. 6).
While the product charges, the battery charge
indicator continues to ash white (Fig. 8).
When the product is fully charged, the battery
charge indicator lights up white continuously.
After approx. 30 minutes, the lights go out
Note: This product can only be used without
‘Unplug before use’ reminder
The battery charge indicator ashes white to
remind you to unplug the shaver rst.
Always check the product and all
accessories before using. Do not use the
product or any accessory if it is damaged,
as this may cause injury. Always replace
a damaged part with one of the original
Note: This product can only be used without
Removing or attaching the click-on
1 Make sure the product is switched o.
2 To attach the click-on attachment, insert
the lug of the attachment into the slot in
the top of the product. Then press down
the attachment to attach it to the product
3 To remove the click-on attachment, twist
the attachment and then pull it o the
You can use this product either wet or dry, or
For a wet shave, apply some water and
shaving foam or gel to your skin and rinse the
shaving heads under the tap with warm water
before following the steps below.
1 Press the on/o button once to switch on
2 Move the shaving heads over your skin in
circular movements (Fig. 13) to catch all
hairs growing in dierent directions. Make
sure each shaving head is fully in contact
with the skin. Exert gentle pressure for a
close, comfortable shave.
Note: Do not press too hard, as this can
Note: If you are shaving with gel or foam,
rinse the shaving unit regularly during your
shave to ensure that it continues to glide
smoothly over your skin (Fig. 14).
3 Use the narrow sides of the shaving unit to
shave in hard-to-reach areas such as along
your jawline and under your nose (Fig. 15).
4 Switch o and clean the product after each
use (see ‘Cleaning and maintenance’).
Note: Make sure you rinse all foam or
shaving gel o the product.
21-Day adaptation process
-21 Day Trial and Conversion Process. It is a
fact that your skin and beard need time to
adjust to a new grooming system.
-Use your new shaver exclusively for 3 weeks
to fully enjoy the closeness of a Philips
-At rst you may not get as close a shave as
you expect, or your face may even become
slightly irritated. This is normal since your
beard and skin will need time to adjust.
Invest 3 weeks and you’ll soon experience
the full joy of your new shaver.
-Stick with it! If you alternate shaving
methods during the adjustment period, it
may make it more dicult to adapt to the
Philips Norelco shaving system.
-If you are still not convinced after 21 days,
Philips Norelco will refund you the full
purchase price as long as the request is
received within 45 days of purchase.
1 Press the on/o button once to switch on
2 Hold the trimmer perpendicular to the skin
and move it downwards while exerting
3 You can also use the trimmer to contour
your beard (Fig. 16) and sideburns (Fig. 17).
4 Switch o the product and clean the
trimmer after each use to prevent clogging
and damage. Switch o the product and
clean the trimmer after each use to prevent
Clean the product and the attachments after
each use for optimal performance.
Cleaning the shaver under the tap
Clean the shaver after every shave for optimal
Always check if the water is too hot, to
prevent burning your hands.
Never dry the shaving unit with a towel
or tissue, as this may damage the shaving
While rinsing shaving heads, water may
drip out of the base of shaver. This is a
1 Press the on/o button once to switch on
2 Rinse the shaving unit with cold or
lukewarm water (Fig. 14).
3 Press the on/o button to switch o the
product. Press the release button to open
the shaving unit (Fig. 18).
4 Rinse the hair chamber under a warm tap
5 Rinse the shaving head holder under the
6 Carefully shake o excess water and let
the shaving head holder air-dry completely
7 Close the shaving unit (Fig. 22).
We advise you to clean the shaving heads
thoroughly once a month or when the shaver
does not shave as well as it used to.
1 Make sure that the product is disconnected
2 Press the on/o button once to switch o
3 Press the release button on the shaving unit
(Fig. 18) and pull the shaving head holder
o the shaving unit (Fig. 23).
4 Turn the retaining rings counterclockwise
and remove them (Fig. 24).
5 Remove the shaving heads from the
shaving head holder. Each shaving head
consists of a cutter and guard (Fig. 25).
Note: Do not clean more than one cutter
and guard at a time, since they are all
matching sets. If you accidentally put a
cutter in the wrong shaving guard, it may
take several weeks before optimal shaving
6 Clean the cutter and guard under the tap
7 Put the cutter back into the guard (Fig. 27).
8 Place the shaving heads in the shaving head
Note: Make sure that the projections of the
shaving heads t exactly into the recesses
of the shaving head holder.
9 Place the retaining rings back onto the
shaving head holder and turn them
clockwise (‘click’) (Fig. 29).
-Each retaining ring has two recesses and
two projections that t exactly in the
projections and recesses of the shaving
10 Reinsert the hinge of the shaving head
holder into the slot of the shaving unit
(Fig.30). Close the shaving unit (Fig. 22).
Cleaning the click-on trimmer
Never dry the trimmer with a towel or
tissue, as this may damage the trimming
Clean the trimmer after each use.
1 Press the on/o button once to switch on
2 Rinse the trimmer with cold or lukewarm
3 After cleaning, press the on/button to
4 Carefully shake o excess water and let the
trimmer air-dry completely (Fig. 32).
5 For optimal performance, lubricate the
teeth of the trimmer with a drop of mineral
Put the protection cap on the product (Fig. 33)
to protect it from dirt accumulation. We advise
you to let the product dry before you store it.
You can lock the shaver when you are going
to travel to prevent it from switching on
To activate or deactivate the travel lock,
press the on/o button for 3 seconds. When
the travel lock is activated or deactivated,
the power-on light ring ashes three times
Note: The product unlocks automatically when
connected to a power outlet.
For maximum shaving performance, replace
the shaving heads once a year (Fig. 35).
Replacement parts and accessories may
be purchased at a store near you or on our
website www.philips.com/store.
The following accessories and spare parts are
-SH30 Philips Norelco replacement shaving
For assistance, visit our website:
www.philips.com/support or call toll free
-This product contains a rechargeable
lithium-ion battery which must be disposed
-Contact your local town or city ocials
for battery disposal information. You
can also call 1-800-822-8837 or visit
www.call2recycle.org for battery drop-o
-For assistance, visit our website
www.philips.com/support or call
1-800-243-3050 toll free.
-Your product is designed and
manufactured with high quality
materials and components, which can
be recycled and reused. For recycling
information, please contact your local
waste management facilities or visit
Philips North America LLC warrants this
new product (except shaving heads) against
defects in materials or workmanship for a
period of two years from the date of purchase,
and agrees to repair or replace any defective
IMPORTANT: This warranty does not cover
damage resulting from accident, misuse or
abuse, lack of reasonable care, the axing of
any attachment not provided with the product
or loss of parts or subjecting the product to
any but the specied voltage or batteries.*
NO RESPONSIBILITY IS ASSUMED FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
In order to obtain warranty service, simply go
to . It is suggested www.philips.com/support
that for your protection you return shipments
of product by insured mail, insurance prepaid.
Damage occurring during shipment is not
covered by this warranty.
NOTE: No other warranty, written or oral, is
authorized by Philips North America LLC.
This warranty gives you specic legal rights,
and you may also have other rights which
vary from state to state. Some states do not
allow the exclusion or limitation of incidental
or consequential damages, so the above
exclusion and limitations may not apply to
*Read enclosed instructions carefully.
45-DAY MONEY-BACK GUARANTEE
To enjoy the closest and most comfortable
shave from your new Philips Norelco Men’s
Shaver, the shaver should be used exclusively
for 3 weeks. This allows your hair and skin
enough time to adapt to the Philips Norelco
Shaving System. If, after that period of time,
you are not fully satised with your Philips
Norelco Men’s Shaver, send the product
back along with dated sales receipt and we’ll
refund you the full purchase price.
The product must be shipped prepaid by
insured mail, insurance prepaid, have the
original sales receipt, indicating purchase
price and date of purchase, and the money-
back guarantee return authorization form
We cannot be responsible for lost mail.
The product must be postmarked no later
than 45 days after the date of purchase. Philips
reserves the right to verify the purchase price
of the product and limit refunds not to exceed
To obtain money-back guarantee service,
please go to www.PhilipsMoneyBack.com.
Delivery of refund check will occur
6–8weeks after receipt of returned
X500x_ZETA-X-US_300008489771_IID-LFLT_foldedA7_BW.indd 1-8
X500x_ZETA-X-US_300008489771_IID-LFLT_foldedA7_BW.indd 1-8
X500x_ZETA-X-US_300008489771_IID-LFLT_foldedA7_BW.indd 1-8
X500x_ZETA-X-US_300008489771_IID-LFLT_foldedA7_BW.indd 1-8X500x_ZETA-X-US_300008489771_IID-LFLT_foldedA7_BW.indd 1-8 05-07-22 14:46
05-07-22 14:46
05-07-22 14:46
05-07-22 14:4605-07-22 14:46
