Phoenix Gold Z212AB-V2 Manual

Phoenix Gold Subwoofer Z212AB-V2

Læs gratis den danske manual til Phoenix Gold Z212AB-V2 (4 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Phoenix Gold Z212AB-V2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Models: Z212AB-V2

Z-Series

Enclosures

Z-Series Enclosures

Z212AB-V2 - Dual 12” Active Wedge Enclosure

Disclaimer

Always ensure the Active Enclosure is securely attached, to avoid movement. PHOENIX GOLD accepts no responsibility

for damage or injury in relation to inappropriate securing of this product.

Control Descriptions

LEVEL

This allows the adjustment of the amplier level of the

subwoofer. Turn clockwise to increase the level. If the

sound becomes distorted reduce the level.

LOW PASS FILTER (LPF)

This allows the adjustment of the highest frequency the

Active Enclosure will produce. This should be adjusted

to blend with your main speakers. Typically, this will be

set to around 100Hz (approximately the central position

of the control knob)

BASS REMOTE CONTROLLER

This control can be mounted in the front of the vehicle

to give you control of your subwoofers output level.

Installation

Make sure the Active Enclosure is rmly xed in your

vehicle. Check before drilling or cutting holes. DO

NOT work near fuel tanks, fuel lines hydraulic lines or

electrical wiring.

DO NOT mount the Active Enclosure in such a way as

to pinch or damage the wires.

Make sure everything is rmly connected before

attaching a +12V wire. Ensure the +12V wire is fused as

close as possible to the battery. Always use a fuse with

the recommended rating.

Wiring

• Connect the ground wire to the vehicle rst

(clean dirt and paint to bare metal)

• Connect the remote on (blue wire)

• Connect the RCA cables if applicable OR

• Connect the speaker level wire by splicing

into the headunits speaker wires. See Note1

on adjacent page.

• Connect the remote level controller with the

supplied lead

• Please ensure power wire is fused within 12”

of battery

• Connect the 12 volt (red wire) to the positive

battery terminal.

• Check all connections.

SPECIFICATION Z212ABV2

Peak Power (Watts) 640 Watts

Max Power (Watts) 320 Watts

RMS Power (Watts) 160 Watts

Frequency Response 10Hz-200Hz

Low Pass Filter (Variable) 50Hz-200Hz

Tuning Bass Reex

Woofer Size Dual 12”

Fuse 25A

Dimensions (mm/inches) 824(w) x 383(h) x 395(d)

32.44” x 15.07” x

Produkt Specifikationer

Mærke:	Phoenix Gold
Kategori:	Subwoofer
Model:	Z212AB-V2

Har du brug for hjælp?

Hvis du har brug for hjælp til Phoenix Gold Z212AB-V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Subwoofer Phoenix Gold Manualer

Phoenix Gold Z8AB Manual

23 Juli 2025

Phoenix Gold ZP12D2 Manual

9 Januar 2025

Phoenix Gold Z12AB Manual

9 Januar 2025

Phoenix Gold Z10AB Manual

9 Januar 2025

Phoenix Gold ZB8P Manual

9 Januar 2025

Phoenix Gold ZP12D4 Manual

20 Oktober 2024

Phoenix Gold ZMAX18PB Manual

2 September 2024

Phoenix Gold ZMAX82 Manual

2 September 2024

Phoenix Gold ZDSB200S Manual

2 September 2024

Phoenix Gold Z18AB Manual

2 September 2024

Subwoofer Manualer

Nyeste Subwoofer Manualer

Klipsch ProMedia SWS Manual

12 August 2025

RCF FLB60673 Manual

12 August 2025

Black Hydra Delta 10S Manual

12 August 2025

12 August 2025

12 August 2025

12 August 2025

12 August 2025

9 August 2025

PreSonus Eris Pro 10 Manual

6 August 2025

Ground Zero GZRB 20SPL-ACT Manual

6 August 2025