Planar SL4650 Manual

Planar overvåge SL4650

Læs gratis den danske manual til Planar SL4650 (35 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Planar SL4650, eller vil du spørge andre brugere om produktet?

Side 1/35
Simplicity Series
Simplicity Series
ii
Safety Instructions
Warnings and Precautions
KNOW THESE SAFETY SYMBOLS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol indicates high voltage is present
inside. It is dangerous to make any kind of
contact with any inside part of this product.
This symbol alerts you that important literature
concerning operation and maintenance has
been included with this product.
CAUTION: FCC/CSA regulations state that any unauthorized
changes or modications to this equipment may
void the user’s authority to operate it.
CAUTION: To prevent electric shock, match the wide blade
of plug to the wide slot, and fully insert the plug.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE
OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The Socket-outlet should be installed near the apparatus and
be easily accessible.
Read and follow these instructions
when connecting and using your Public
Information Display:
Unplug the display if you are not going to use it for an
extensive period of time.
Unplug the display if you need to clean it with a slightly
damp cloth. The screen many be wiped with a dry cloth
when the power is off. However, never use alcohol, solvents
or ammonia-based liquids.
Consult a service technician if the display does not operate
normally when you have followed the instructions in this
manual.
The casing cover should be opened only by qualied service
personnel.
Keep the display out of direct sunlight and away from stoves
or any other heat sources.
Remove any object that could fall into the vents or prevent
proper cooling of the display’s electronics.
Do not block the ventilation holes on the cabinet.
Keep the display dry. To avoid electric shock, do not expose
it to rain or excessive moisture.
If turning off the display by detaching the power cable, wait
for 6 seconds before re-attaching the power cable for normal
operation.
To avoid the risk of shock or permanent damage to the set
do not expose the display to rain or excessive moisture.
When positioning the display, make sure the power plug and
outlet are easily accessible.
• IMPORTANT: Always activate a screen saver program
during your application. If a still image in high contrast
remains on the screen for an extended period of time, it may
leave an ‘after-image’ or ‘ghost image’ on the front of the
screen. This is a well-known phenomenon that is caused by
the shortcomings inherent in LCD technology. In most cases
the afterimage will disappear gradually over a period of time
after the power has been switched off. Be aware that the
after-image symptom cannot be repaired and is not covered
under warranty.


Produkt Specifikationer

Mærke: Planar
Kategori: overvåge
Model: SL4650

Har du brug for hjælp?

Hvis du har brug for hjælp til Planar SL4650 stil et spørgsmål nedenfor, og andre brugere vil svare dig




overvåge Planar Manualer

Planar

Planar LX1201PTI Manual

11 Januar 2025
Planar

Planar PM16-S Manual

8 Januar 2025
Planar

Planar PZN3815Q Manual

8 Januar 2025
Planar

Planar SLM50 Manual

16 December 2024
Planar

Planar UltraRes L Manual

1 Oktober 2024
Planar

Planar PLN2700 Manual

6 September 2024
Planar

Planar Helium PCT2495 Manual

5 September 2024
Planar

Planar PZN3410Q Manual

3 September 2024

overvåge Manualer

Nyeste overvåge Manualer