Planet Audio EC10B Manual

Planet Audio Ikke kategoriseret EC10B

Læs gratis den danske manual til Planet Audio EC10B (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Planet Audio EC10B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

EC10B User’s Manual - page 8

CONTENTS

EC10B User’s Manual - Contents

U S E R ’ S M A N U A L

EC10B User’s Manual - page 2

Installation

System #1: 2 channel input/2-way system with low level inputs

EC10B User’s Manual - page 1

EC10B User’s Manual - page 6

Input, output, remote and power connections

EC10B User’s Manual - page 3

Front and rear channel controls

EC10B User’s Manual - page 4

EC10B User’s Manual - page 5

Electrical and remote level controller connections

Input and output connections

System #2: 2 channel input/2-way system with high level inputs

EC10B User’s Manual - page 7

Specifications

EC10B User’s Manual - page 9

This crossover accepts the input signal

from a 2-channel input source, using

either low level RCA outputs or high

level (speaker) outputs from your head

unit.

Input source selection

The EC10B features both low level (RCA)

inputs and high level (speaker level) inputs,

enabling you to generate a two-way sys-

tem from virtually any head unit you may

own.

If your head unit has RCA Left and Right

Channel outputs, you should choose these

for your EC10B input source, since the

quality of sound reproduction is best when

using these.

However, if your head unit lacks RCA

outputs, you can use the speaker outputs

from the head unit as an input source for

the EC10B. Simply follow the wiring dia-

grams in this manual closely to make sure

you get the best performance possible

and avoid damaging your head unit.

Input and output connections vary depending on the system application. Examples

are shown in system diagrams on the pages which follow in this manual. Always use

high quality RCA cables for low level input and output connections.

EC10B output: 2-way stereo system: Tweeter/Mids L/R channel

Subwoofer L/R* channels

* can also be set to Mono Sub channel

To L/R output

from head unit

MONOBLOCK

SUBWOOFER AMPLIFIER

FOR

RIGHT CHANNEL

MONOBLOCK

SUBWOOFER AMPLIFIER

FOR LEFT CHANNEL

The EC10B has internal ON/OFF

circuitry which responds to turning ON

or OFF the head unit of your car audio

system. This requires that your head

unit have a remote turn-on lead

available on the rear panel (which most

head units have).

With this convenient remote turn-on/off

feature, you never have to worry about

turning off the power to the equalizer

when you shut off the audio system.

When you are confident all connections

have been made correctly:

1. Power up your audio system by

turning on the head unit.

2. Set the volume control on the head

unit to about 3/4 volume, and adjust

the EC10B’s Speaker Input Gain

controls for each channel to just below

the level of distortion.

Further fine tuning of the controls on

the EC10B and the input levels of the

connected amplifiers may be

necessary to obtain satisfactory results.

If you are unsure about how to fine-

tune the system, please consult with

your Planet Audio dealer.

MIDS/HIGHS

2 CHANNEL AMPLIFIER

EC10B output: 2-way stereo system: Tweeter/Mids L/R channel

Subwoofer L/R* channels

* can also be set to Mono Sub channel

To L/R speaker outputs

from head unit

MONOBLOCK

SUBWOOFER AMPLIFIER

FOR

RIGHT CHANNEL

MONOBLOCK

SUBWOOFER AMPLIFIER

FOR LEFT CHANNEL

MIDS/HIGHS

2 CHANNEL AMPLIFIER

Grey/Black

R(+)

Grey R(-)

White/Black

L(+)

White L(-)

1 How this crossover is used

1 Input source selection

2 Installation

2 Mounting the equalizer

2 Turning on the power

3 Input, output, remote and

power connections

4 Front and rear channel

controls

5 Electrical and remote level

controller connections

6 System diagrams

8 Troubleshooting

9 Specifications

Congratulations on your

purchase of a Planet Audio

Crossover.

It has been designed, engineered

and manufactured to bring you

the highest level of performance

and quality, and will afford you

years of listening pleasure.

Thank you for making

Planet Audio your choice for car

audio entertainment!

EC10B

2-Way Electronic Crossover

with Remote Subwoofer Level Control

page

LOW PASS: 35-400Hz

HIGH PASS: 50-1.5kHz

12dB/octave

0-+12dB

110dB

0.01%

80dB

20k Ohms (low level); 470 ohms (high level)

100 Ohms

1:2 (+6dB)

DC-to-DC switching type

8V maximum

4-1/4” x 7-1/14” x 1-1/8”

(108 x 184 x 29mm)

Crossover center frequency ranges

Crossover slope

Bass Boost level adjustment

Signal-to-Noise Ratio

THD

Channel separation

Input impedance

Output impedance

Output gain

Power supply

Output voltage

Dimensions (W x D x H)

All specifications subject to change without notice.

Low Pass (Subwoofer) Crossover

Channel Controls:

High Pass (Highs/Mids) Crossover

Channel Controls:

Input Controls:

TWEETERS,

MIDRANGE,

MIDBASS

FULL RANGE

SPEAKERS

SUBWOOFER

Right

Left

SUBWOOFER

Right

Left

TWEETERS,

MIDRANGE,

MIDBASS

FULL RANGE

SPEAKERS

Produkt Specifikationer

Mærke:	Planet Audio
Kategori:	Ikke kategoriseret
Model:	EC10B
Bredde:	184 mm
Dybde:	111 mm
Højde:	201.7 mm
Velegnet til:	2-vejssystem
Produktfarve:	Sort
Produkttype:	Aktiv overgang
Cutoff frekvens:	10 - 20000 Hz
Skirt selektivitet:	110 dB/oktave