Popp Strike Lock Control Manual

Popp Smart hjem Strike Lock Control

Læs gratis den danske manual til Popp Strike Lock Control (8 sider) i kategorien Smart hjem. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Popp Strike Lock Control, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Quick Start

This device is a Z-Wave actuator. Pressing the “Z-Wave button” 3 times in 1 second (includes) and removes (excludes) the

device from/to the Z-Wave network.

Please refer to the chapters below for detailed information about all aspects of the product.

Electric Strike Lock Control

Manual

012501

Product Description

An electric strike is an access control device used to lock and release doors. Electric strikes are installed in or on the doorframe

and work in conjunction with mechanical door locks, on the principle of electronically controlling the rotation of the keeper.

Allowing for door opening without manual retraction of the mechanical door lock. This product combines a 16 mm thick strike

lock (that will fit into almost all door formats) with a Z-Wave plus empowered wireless control.

The lock mechanics and the Z-Wave control are operated by a 9V block battery or an external 8-12V AC / 8-24V DC

transformer. The Z-Wave control accepts commands to open or close the strike. Depending on a configuration parameter the

door will be looked automatically after a certain time even if no ‘close’ command was sent. According to the connected Z-Wave

Gateway all actions of the Strike Lock will be recorded with a time stamp.

The device is a secure Z-Wave Plus device and can be used in one wireless Z-Wave network with other certified devices

regardless of origin and brand. It supports secure communication if the central controller supports secure communication as

well.

Installation Guidelines

The Strike-Lock has a IP 20 protection class. Because of that it is not recommended to install the device directly outdoors.

There 4 possible starting situations when you want to install the Strike-Lock:

No existing installation of an electrical door opener:

LED

Z-Wave

Button

You have to install the mechanical

part first. Depending if there is an

existing electrical transformer or the

door opener will be battery powered

you refer to picture 1 or 2.

The strike lock can be installed:

- next to electrical transformer

- behind the mechanic doorlock

- between those mentioned parts

Produkt Specifikationer

Mærke:	Popp
Kategori:	Smart hjem
Model:	Strike Lock Control
Kode for international beskyttelse (IP):	IP20
Bredde:	56 mm
Dybde:	25 mm
Højde:	14 mm
Vægt:	100 g
Indbygget skærm:	Ingen
Produkttype:	Skifteaktuator
Strømkilde type:	AC, Battery, DC
Maksimal indendørs rækkevidde:	40 m
Maksimal udendørsinterval:	100 m
Frekvens:	868 MHz