Porter-Cable PCC608 Manual

Porter-Cable Boremaskine PCC608

Læs gratis den danske manual til Porter-Cable PCC608 (40 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Porter-Cable PCC608, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/40
20V Max* 1/2 inch (13mm) Brushless Drill / Driver
Perceuse visseuse sans balai de 13mm (1/2po) et 20V Max*
Taladro/atornillador sin escobillas de 20V Máx* de 1/2 pulg. (13 mm)
CATALOG NUMBER
N° DE CATALOGUE
CATÁLOGO N°
PCC608
Instruction manual
Manuel d’instructions
Manual de’instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA:
LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Thank you for choosing PORTER-CABLE! To register your new product, go to:
www.portercable.com/ServiceAndSupport/ProductRegistration.aspx
Merci d’avoir choisi PORTER-CABLE! Consulter le site Web www.portercable.com/
ServiceAndSupport/ProductRegistration.aspx pour enregistrer votre nouveau produit.
Gracias por elegir PORTER-CABLE usted! Para registrar su nuevo producto, visite: www.
portercable.com / ServiceAndSupport / ProductRegistration.aspx
*Maximum initial battery pack voltage (measured without a workload) is 20 volts.
Measured under a workload, nominal voltage is 18.
*La tension initiale maximale du bloc-piles (mesurée sans charge de travail) est de 20
volts. La tension nominale est de 18.
*El máximo voltaje inicial del paquete de baterías (medido sin una carga de trabajo)
es 20 voltios. la tensión nominal es de 18.
2
General Power Tool Safety
Warnings
WARNING: Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings
refers to your mains-operated
(corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed
or grounded surfaces such as
pipes, radiators, ranges and
refrigerators. There is an increased
risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a
ground fault circuit interrupter
(GFCI) protected supply. Use of a
GFCI reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while
operating power tools may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust
mask, nonskid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off
position before connecting to
power source and/ or battery pack,
picking up or carrying the tool.
Carrying power tools with your finger
on the switch or energizing power
tools that have the switch on invites
accidents.
d) Remove any adjusting key or
wrench before turning the power
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols
below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided,
may result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.

Produkt Specifikationer

Mærke: Porter-Cable
Kategori: Boremaskine
Model: PCC608

Har du brug for hjælp?

Hvis du har brug for hjælp til Porter-Cable PCC608 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Boremaskine Porter-Cable Manualer

Porter-Cable

Porter-Cable PC1800D Manual

5 August 2025
Porter-Cable

Porter-Cable CF2020 Manual

26 Juni 2024
Porter-Cable

Porter-Cable PCC608 Manual

28 Maj 2024
Porter-Cable

Porter-Cable PCCK607 Manual

27 Januar 2024
Porter-Cable

Porter-Cable PC700D Manual

26 Maj 2023
Porter-Cable

Porter-Cable PCC640 Manual

21 Marts 2023
Porter-Cable

Porter-Cable PCCK600 Manual

10 Oktober 2022

Boremaskine Manualer

Nyeste Boremaskine Manualer

Milwaukee

Milwaukee M18 2615-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2904-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2903-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 2607-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel Super Hawg 2811-20 Manual

13 August 2025
Bosch

Bosch GBH 18 V-26 Manual

13 August 2025
Milwaukee

Milwaukee M18 2801-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 Fuel 3404 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel Super Hawg 2809-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2807-20 Manual

12 August 2025