Porter-Cable PC1800D Manual

Porter-Cable Boremaskine PC1800D

Læs gratis den danske manual til Porter-Cable PC1800D (44 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Porter-Cable PC1800D, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/44
18v 1/2 inch (13mm)
Cordless Drill/Driver
Instruction manual
Manuel d'instructions
Manual de'instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN,
CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA.
ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL
PRODUCTO.
CATALOG NUMBER
PC1800D
Perceuse-visseuse sans fil de
18v et 13 mm (1/2 po)
Taladro/destornillador
inalámbricos de 13 mm
(1/2 pulgadas) y 18v
8 10 12 14
90550129 PC1800D 4/1/09 2:37 PM Page 1
2
General Power Tool Safety Warnings
Read all safety warnings and instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
:
90550129 PC1800D 4/1/09 2:38 PM Page 2

Produkt Specifikationer

Mærke: Porter-Cable
Kategori: Boremaskine
Model: PC1800D

Har du brug for hjælp?

Hvis du har brug for hjælp til Porter-Cable PC1800D stil et spørgsmål nedenfor, og andre brugere vil svare dig


Boremaskine Porter-Cable Manualer

Porter-Cable

Porter-Cable PC1800D Manual

5 August 2025
Porter-Cable

Porter-Cable CF2020 Manual

26 Juni 2024
Porter-Cable

Porter-Cable PCC608 Manual

28 Maj 2024
Porter-Cable

Porter-Cable PCCK607 Manual

27 Januar 2024
Porter-Cable

Porter-Cable PC700D Manual

26 Maj 2023
Porter-Cable

Porter-Cable PCC640 Manual

21 Marts 2023
Porter-Cable

Porter-Cable PCCK600 Manual

10 Oktober 2022

Boremaskine Manualer

Nyeste Boremaskine Manualer

Draper

Draper Expert 95092 Manual

1 Oktober 2025
Draper

Draper Expert 14258 Manual

1 Oktober 2025
Draper

Draper Storm Force 38255 Manual

1 Oktober 2025
Stanley

Stanley FatMax SFMEH230K Manual

1 Oktober 2025
Draper

Draper 54488 Manual

1 Oktober 2025
Hazet

Hazet 9530-11 Manual

30 September 2025
Bavaria

Bavaria BCD 18 2B Manual

29 September 2025
Bavaria

Bavaria BCD 18 Manual

29 September 2025
Bavaria

Bavaria BCD 14.4 2B Manual

29 September 2025
Bavaria

Bavaria BID 500 E Manual

29 September 2025