Porter-Cable PCC710 Manual

Porter-Cable Multiværktøj PCC710

Læs gratis den danske manual til Porter-Cable PCC710 (40 sider) i kategorien Multiværktøj. Denne vejledning er vurderet som hjælpsom af 57 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 29 anmeldelser. Har du et spørgsmål om Porter-Cable PCC710, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/40
www.portercable.com
20v Max* Lithium Oscillating Multi-Tool
Outil oscillant polyvalent sans fil á block-piles au
lithium-ion de 20v Max*
Multiherramienta oscilante de iones de litio de 20v Max*
CATALOG NUMBER
N° DE CATALOGUE
CATÁLOGO N°
PCC710
Instruction manual
Manuel d’instructions
Manual de’instrucciones
Batteries and chargers sold separately.
Blocs-piles et chargeurs vendus séparément
Las baterías y los cargadores se venden por separado
INSTRUCTIVO DE OPERACIÓN, CENTROS DE
SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 20 volts.
The nominal voltage is 18.
*La tension initiale maximale du bloc-piles (mesurée sans charge de travail) est de 20
volts. La tension nominale est de 18.
*El máximo voltaje inicial del paquete de baterías (medido sin una carga de trabajo) es 20
voltios. La tensión nominal es de 18.
F I T M E N T
NIVERSAL
™
COMPATIBLE WITH:
CON| / AVEC
D WALTE®
Thank you for choosing PORTER-CABLE! To register your new product, go to:
www.portercable.com/ServiceAndSupport/ProductRegistration.aspx
Merci d’avoir choisi PORTER-CABLE! Consulter le site Web www.portercable.
com/ServiceAndSupport/ProductRegistration.aspx pour enregistrer votre
nouveau produit.
Gracias por elegir PORTER-CABLE usted! Para registrar su nuevo producto,
visite: www.portercable.com / ServiceAndSupport / ProductRegistration.aspx
2
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
relates to protecting The symbols YOUR SAFETY and PREVENTING PROBLEMS.
below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided,
may result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
GENERAL SAFETY RULES
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
e)
When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f)
If operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, nonskid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/ or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
d)
Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables

Produkt Specifikationer

Mærke: Porter-Cable
Kategori: Multiværktøj
Model: PCC710

Har du brug for hjælp?

Hvis du har brug for hjælp til Porter-Cable PCC710 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Multiværktøj Porter-Cable Manualer

Porter-Cable

Porter-Cable PCCE720 Manual

2 September 2024
Porter-Cable

Porter-Cable PCC710 Manual

13 Juli 2024

Multiværktøj Manualer

Nyeste Multiværktøj Manualer

Milwaukee

Milwaukee M12 2426-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 Fuel 2526-20 Manual

12 August 2025
Makita

Makita TM3010C Manual

11 August 2025
Fein

Fein AFMT 12 QSL Manual

7 August 2025
Fein

Fein MultiMaster Top Extra FMM 350 QSL Manual

7 August 2025
Fein

Fein MultiTalent AFMT12QSL ALED Manual

7 August 2025
Fein

Fein FMT 250 SL Manual

7 August 2025
Fein

Fein Multimaster AMM 300 Plus Manual

7 August 2025
Bosch

Bosch GOP 18V-EC Professional Manual

7 August 2025
Fein

Fein MultiMaster Top FMM350QSL Manual

7 August 2025