Porter-Cable PCC740 Manual

Porter-Cable Skruemaskine PCC740

Læs gratis den danske manual til Porter-Cable PCC740 (36 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om Porter-Cable PCC740, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/36
20V Max* 1/2 inch (12.7mm) Impact Wrench with hog ring anvil
Clé à Chocs avec enclume anneau porc de 12.7mm (1/2 po) et 20V Max*
Llave de impacto de 20V Máx* con conector Tipo anillo de ½ pulg. (13mm)
CATALOG NUMBER
N° DE CATALOGUE
Nº DE CATÁLOGO
PCC740
Instruction manual
Manuel d’ instructions
Manual de Instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA:
LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Thank you for choosing PORTER-CABLE! To register your new product, go to:
www.portercable.com/ServiceAndSupport/ProductRegistration.aspx
Merci d’avoir choisi PORTER-CABLE! Consulter le site Web www.portercable.com/
ServiceAndSupport/ProductRegistration.aspx pour enregistrer votre nouveau produit.
Gracias por elegir PORTER-CABLE ! Para registrar su producto, visite : www.portercable.
com/ServiceAndSupport/ProductRegistration.aspx
*Maximum initial battery pack voltage (measured without a workload) is 20 volts.
Measured under a workload, nominal voltage is 18.
*La tension initiale maximale du bloc-piles (mesurée sans charge de travail) est de 20
volts. La tension nominale est de 18.
*El máximo voltaje inicial del paquete de baterías (medido sin una carga de trabajo)
es 20 voltios. la tensión nominal es de 18.
2
General Power Tool Safety Warnings
WARNING: Read all safety
Warnings and all instructions. Failure to
follow the warnings and instructions may
result in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks
which may ignite the dust or fumes.
c)
Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c) Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a
ground fault circuit interrupter (GFCI)
protected supply. Use of a GFCI
reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while
operating power tools may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust
mask, nonskid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off
position before connecting to
power source and/ or battery
pack, picking up or carrying the
tool. Carrying power tools with your
finger on the switch or energizing
power tools that have the switch on
invites accidents.
d)
Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to a
rotating part of the power tool may
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you
to hazardous situations and your risks of personal injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided, may
result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.

Produkt Specifikationer

Mærke: Porter-Cable
Kategori: Skruemaskine
Model: PCC740

Har du brug for hjælp?

Hvis du har brug for hjælp til Porter-Cable PCC740 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skruemaskine Porter-Cable Manualer

Porter-Cable

Porter-Cable PCC641 Manual

30 Juli 2024
Porter-Cable

Porter-Cable PCE211 Manual

21 Juli 2024
Porter-Cable

Porter-Cable PCCK640 Manual

18 Juli 2024
Porter-Cable

Porter-Cable PCC740 Manual

11 Maj 2023
Porter-Cable

Porter-Cable PCCF920 Manual

2 Marts 2023

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

Milwaukee

Milwaukee M18 FUEL ONE-KEY 2864-20 Manual

14 August 2025
Milwaukee

Milwaukee M18 2656-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 FUEL 2565-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 Fuel 2553-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 FUEL ONE-KEY 2862-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 3062-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 FUEL 2565P-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 FUEL 3048-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 2666-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 FUEL 3049-20 Manual

13 August 2025