Porter-Cable PCE300 Manual

Porter-Cable Sav PCE300

Læs gratis den danske manual til Porter-Cable PCE300 (40 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Porter-Cable PCE300, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/40
7-1/4” (184mm), 15 AMP Circular Saw
Scie Circulaires 7-1/4” (184mm), 15 Ampère
Sierras Circulares de 184mm (7-1/4”), 15 Amperios
CATALOG NUMBER
N° DE CATALOGUE
CATÁLOGO N°
PCE300
Instruction manual
Manuel d’instructions
Manual de’instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA:
LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Thank you for choosing PORTER-CABLE! To register your new product, go to:
www.portercable.com/ServiceAndSupport/ProductRegistration.aspx
Merci d’avoir choisi PORTER-CABLE! Consulter le site Web www.portercable.com/
ServiceAndSupport/ProductRegistration.aspx pour enregistrer votre nouveau produit.
Gracias por elegir PORTER-CABLE usted! Para registrar su nuevo producto, visite: www.
portercable.com / ServiceAndSupport / ProductRegistration.aspx
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING:
Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may
ignite the dust or fumes.
c)
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c) Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f)
If operating a power tool in a damp
location is unavoidable, use a
ground fault circuit interrupter (GFCI)
protected supply. Use of a GFCI
reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence of
drugs, alcohol or medication. A
moment of inattention while operating
power tools may result in serious
personal injury.
b)
Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust
mask, nonskid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off
position before connecting to power
source and/ or battery pack, picking
up or carrying the tool. Carrying
power tools with your finger on the
switch or energizing power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to a
rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you
to hazardous situations and your risks of personal injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided, may
result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.

Produkt Specifikationer

Mærke: Porter-Cable
Kategori: Sav
Model: PCE300

Har du brug for hjælp?

Hvis du har brug for hjælp til Porter-Cable PCE300 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sav Porter-Cable Manualer

Porter-Cable

Porter-Cable PC85TRSOK Manual

26 November 2023
Porter-Cable

Porter-Cable PCE345 Manual

20 Maj 2023
Porter-Cable

Porter-Cable PCE700 Manual

6 Marts 2023
Porter-Cable

Porter-Cable PCC670B Manual

14 November 2022
Porter-Cable

Porter-Cable PCC780 Manual

31 Oktober 2022
Porter-Cable

Porter-Cable PCE300 Manual

8 Oktober 2022

Sav Manualer

Nyeste Sav Manualer

Skil

Skil 5280 Manual

1 Oktober 2025
Skil

Skil 5080 Manual

30 September 2025
Delta

Delta 26-2312 Manual

30 September 2025
Cecotec

Cecotec MultiCut 4000 Manual

30 September 2025
Bavaria

Bavaria BPC 2250/1 Manual

29 September 2025
Bavaria

Bavaria BCS 55 Manual

29 September 2025
Bavaria

Bavaria BPC 1235 Manual

29 September 2025
Bavaria

Bavaria BPC 1235/2 Manual

29 September 2025
Poulan

Poulan Pro PR4218 Manual

29 September 2025
Bavaria

Bavaria BCS 64 Manual

29 September 2025